Author Topic: GOT NEW TIRES!!! Tire on the truck pics (Read 7856 times)

UNBREAKABLE · « **on:** Aug 18, 2005, 04:35:43 PM »

Pit-Bull Rockers
39.50x16.50x16.50

UNBREAKABLE · « **Reply #1 on:** Aug 18, 2005, 04:36:19 PM »

sweet

Hyena · « **Reply #2 on:** Aug 18, 2005, 04:41:47 PM »

On hummer beadlocks? Now you gotta mount them on the truck and take pictures!

CTENG in KS · « **Reply #3 on:** Aug 18, 2005, 04:48:50 PM »

on the truck...on the truck...on the truck...!

whiteman · « **Reply #4 on:** Aug 18, 2005, 04:55:47 PM »

Do it.....

Those tires look cool. how do they perform.

AlaskaToy · « **Reply #5 on:** Aug 18, 2005, 04:57:26 PM »

sweet! Now post up actual height/width measurements, along with air pressure and rim width (8.5" I'm assuming). I am considering a set myself for 17" wheels, but I'm waivering becuase my wheels are only 9.5" wide and the Manf says 11" min.

crawlerdan · « **Reply #6 on:** Aug 18, 2005, 05:00:19 PM »

is be groovin those badboys!!

CTENG in KS · « **Reply #7 on:** Aug 18, 2005, 05:02:57 PM »

Humer rims have to be the baddest ass looking rims on earth

UNBREAKABLE · « **Reply #8 on:** Aug 18, 2005, 05:09:59 PM »

oh yeah on hummer beadlocks....I am in the process of a build-up right now. I started fresh for my '92 x-cab. I started with a new frame for it, cut ALL the b/s off of it, cleaned it inside and out and sandblasted back down to bare metal. I will do a build-up thread on it after I make substantial progress. I am taking pics every step of the way

UNBREAKABLE · « **Reply #9 on:** Aug 18, 2005, 05:11:09 PM »

I was mistaken

I can't mount them on a truck...well I might be able to stick them on the truck for a quik pik tomorrow,( I haven't pulled the axles yet)

Oh they measure w/20psi----16" wide and 39" tall

Oh and the tread is just a little over 3/4 deep

AlaskaToy · « **Reply #10 on:** Aug 18, 2005, 05:35:56 PM »

Quote from: UNBREAKABLE on Aug 18, 2005, 05:11:09 PM

No H1 beadlocks are 9 3/4 wide

Say wah?

Are you sure about that? I was under the distinct impression they are 8.5" wide. Please school me.

UNBREAKABLE · « **Reply #11 on:** Aug 18, 2005, 05:48:14 PM »

let me go check....I was thinking that they are 9 3/4

UNBREAKABLE · « **Reply #12 on:** Aug 18, 2005, 05:59:02 PM »

I was wrong...they are 8.25! I think I'll have mine widend to 10 or 11" wide

AlaskaToy · « **Reply #13 on:** Aug 18, 2005, 06:04:12 PM »

Quote from: UNBREAKABLE on Aug 18, 2005, 05:59:02 PM

I was wrong...they are 8.25!

I thought I was losing it. (I was still off by .25") THanks.

Quote from: UNBREAKABLE on Aug 18, 2005, 05:59:02 PM

I think I'll have mine widend to 10 or 11" wide

Holy crow! For what? That would cost a lot, no? you already have tires on them. If they run well, then just press on!

UNBREAKABLE · « **Reply #14 on:** Aug 18, 2005, 06:13:51 PM »

I am running a 16" tire on a 8.25 wheel...It wouldn't be too much

mr4x42u · « **Reply #15 on:** Aug 18, 2005, 11:39:21 PM »

I've seen them in action,,they look like they do very well in the goo,trails and snow....have yet to see them in the rocks,,but from what I've seen they kick ass..hit the rocks and report..

UNBREAKABLE · « **Reply #16 on:** Aug 19, 2005, 02:08:22 PM »

I will as soon as I get a truck w/ 8 lug 1.25 ton axles done. Right now all I have is a frame.

UNBREAKABLE · « **Reply #17 on:** Aug 21, 2005, 01:17:47 PM »

UNBREAKABLE · « **Reply #18 on:** Aug 21, 2005, 01:19:51 PM »

crawlerdan · « **Reply #19 on:** Aug 21, 2005, 01:26:11 PM »

ooo, perty rims!!

UNBREAKABLE · « **Reply #20 on:** Aug 21, 2005, 01:33:05 PM »

oh yeah, they will be when they go to the powdercoat man. I'm going to have the lock ring done the same color as my truck and the wheels will match my front/rear bumper, roof rack, and frame. I know that it is a whole lota $$$ for a trail/rock rig but damn it'll look good for a couple of days. My frame won't be touched though, belly pan biotch!

UNBREAKABLE · « **Reply #21 on:** Aug 21, 2005, 01:35:16 PM »

Oh I'm gonna repaint the cab and bed before it's all done. I have to start and finish the bed work after I get the axles, engine and tranny's mounted up....it'll be bobbed and dovetailed.

RHG · « **Reply #22 on:** Aug 21, 2005, 01:38:22 PM »

Is there going to be enough room to stuf thosebig guys in there? Looks like the front bumber might be in the way a bit. Time to bust out the plasma

UNBREAKABLE · « **Reply #23 on:** Aug 21, 2005, 05:30:29 PM »

I am rebuilding this truck on a totally new frame. Ground up build-up.

KWP · « **Reply #24 on:** Aug 21, 2005, 05:36:00 PM »

Bad a$$ man. How much did they set you back?

UNBREAKABLE · « **Reply #25 on:** Aug 21, 2005, 05:40:02 PM »

Umm, I'm not quite sure yet. I am working out something with guy

gotrocks · « **Reply #26 on:** Aug 21, 2005, 05:44:15 PM »

I like it!! I have to tell you that you gave me inspiration to start my build. I wasn't sold on the 1 tons until I saw your rig. Keep the the good work man. I just started my build up and can't wait to see things go together.

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

Related Topics