my rig"bernice"

[Stinky]

here ya go boner....heres the 305 blingin heads
all the seals on....wrong....

[Stinky]

so we got 3 done on the first head....n had to backup n fix my f-up n switch all the seals around intake/exhaust....stupid stinky....heres boner in action...i think here he was saying get ure a$$ back over here n put the f*&%in camera down....

[Stinky]

both done

[Stinky]

and then a few w/ the block huggers on....

[Stinky]

and for anyone that likes lightnings....cover ure eyse...it aint that bad but it needs a new bedside n the old man said he didnt like the tube bumper...it didnt match the truck anyways....so shes gettin a roll pan...so much for an absolutely spotless/original truck...

[Stinky]

and heres a few more....then again its nothing spectacular...but it is extremely clean n he would kill me (NO LIE) if he found out i drove it....ill just have to convince him to let me drive it when hes done a lil ...or do it while hes  ...again...

[irishracer34]

Hey furry you better be ready for that race this weekend.     3 hours is a long time to race and you can bet your  it will hurt when its over.

          We will do some light riding on saturday and no !!

           

[outlawzxj]

i thinks we should play a game...its called count by lugs!!! 1...2...3...4...5...6...7...8!!!

Its kinda hard to read but that is a 44...

Its upside down but is high pinion too!!

And the only way to get it home is in the back off the heep...how ironic

[BONER]

looks good a little grinding and elbow grease she will be purty

[MudSlinginYota]

matt when he couldnt find an axle Mat when I found him an axle  lol

[furrballs95]

 damn scott that was a long vid, wat up man havent talked to you in a long time how ya been

I found the video of when we put my tires on laney's xj    here http://videos.streetfire.net/category/Trucks%5e%5eOffroad/3/D53604CC-2435-4752-9581-7A6A82F3FD61.htm

[MudSlinginYota]

hey furry where did you get those light mounts?

[MudSlinginYota]

OH OH OH!!! THERE ON FINALY!!!!!
Daddy Mac's tranny stand was great for this and  a million other projects


Tacked up

Welds finished

A Little Late Work

WAALAA 


Special thanks to: Matt Laney - master welder
                         Daddy Mac - equipment supplier
                         Scott Mac - asst. welder/rail customizer

[DTB]

    ooopsss.....wrong smilie!        yeah, ya gotta pertect them purty body panels

[MudSlinginYota]

http://peswiki.com/index.php/Directory:Acetone_as_a_Fuel_Additive 

[Mac5005]

Laney throw some acetone in the tank so u can pass inspection

[outlawzxj]

got some top secret pics from this weekend in rocky mount!!!
uh oh...whats that torch for??

i wonder what this is goin in??

or this one???

yea that says tci...there is only one rig in nc big enough for that beef!!!

Look at all those big axles...i think we are gonna make a 6x6?!

Think we got enough running gear?? think again!!!

well thats all you get for now so roll all those pics around in the cranium for a bit and see waht kind of ideas you can come up with...take what you come up with and put it in the spin cycle with some steriods and thats what we are building!!!!!

[MudSlinginYota]

lesson learned... paint sliders before install,weld,touch up,make sure all of the slider gets welded

[marky mark]

I must say i'm baffled  , I have no idea as to what all that 's for. But im gonna take a stab at it. I do believe that you still have a white wrangler, and i think all that 's goin in there, am I right  . unless its goin in the burb'. later biatches

[Mac5005]

ok so heres the deal, we are making a tow rig/trail rig/tank............basically, front dana 44 steering axle, front dana 60 non steering axle, rear dana 60 non steering, and rear dana 60 steering axle, Chevy 383 bolted to a th350 bolted to a NP203/NP231J/NP231J w/SYE.....basically an 8 x 8 with 3 cases.....my crawl ratio will be 471.32......hehe 3.23 x 2.01 x 4.0 x 4.0 x 4.56....hehe...the math adds up......3.23 for 1st gear, 2.01 with the 203, 4.0 and 4.0 in each np231, and 4.56 in the axles........but thinking of going with 513 in the axle but not sure......you do the math

[Mac5005]

O YEAH....I almost forgot....also thrown into the parts collected pile........96 ext cab tacoma, 85 k30 single cab, 350/400/203 w/ dana 60s and 4.56's locked front and rear, both for parts, and another 350/350/203 combo.....for parts...hehe

[Mac5005]

So, all in all, the RM crew's list of parts as of 4/3/06........   
3 - 350 engines with 4 bolt mains,
4 - TH350 transmissions,
1 - TH400 transmission,
3 - NP203 tcases,
1 - NP205, 1-NP207, 1-NP208,
4 - Jeep 4.0's,   4- 258ci jeep cranks,     
2 - AX15 trannys,      3-NP231 tcases,   
1 - BW T-10,   
3 - Dana 44 Fronts,
1 - Dana 60 Front,     
3 - Dana 60 Rears,     
3 - Dana 30 fronts,   
3 - GM 10-bolts
1 - GM 12-bolt
1 - Ford 8.8",
1 - 96 Ext cab 2.7L 5spd 4x4 Toyota Tacoma,complete,
1 - 85 K30 Single Wheel Std Cab, complete
1 - 89 Wrangler Frame and body
1 - 52 Dodge Power Wagon M-37


Plus the vehicles you already know......there it is all layed out there plain and simple, nothing hidden, no suprises, its all there in black and white.  Im am hiding nothing.   

[MudSlinginYota]

frank the tank otta be poppin his head in here any time now. oh scott please thank your dad again for lettin me use all his sh1t im lovin the sliders and it was fun as puttin them on ive never welded and now i gotta get a welder I GOTS DA FEEEEVA

[outlawzxj]

scott you even got me all confused now... all i know is there are enough parts laying around the rock to build what you said plus some left over to build a DD...

[marky mark]

ALL I CAN SAY IS   

[BONER]

i did the math and you guys are still nuttier than a squirrel fart.   I think i can see the final result

[Stinky]

well....good to see u guys have enough parts to make a a pretty bada$$ stealth cruise liner...buuuuuuut i just scored a set of all-pro 4" leaves...FO FREEE...the left top leaf is bent...REALLY BAD...but im gonna bend it back n use it... and then once summer gets here ill buy marlins....im fabbin the dude some radius arms to fit his hpd44 out of a bronco so he can get his dakoter back on the streets....but i get the leaves, shackles, bolts, n u-bolt flip kit...FREEEEE....i love that word....so thats like...$450 less i need now......

[974runner88]

sorry ima lil late but i finally made it to marlin

[outlawzxj]

its about damn time frank!!! thought you would never show up how the horunner??? heard you got a sweet bumper built for the rear...get some pics up so the nc boys can see what is goin on...

[MudSlinginYota]

  frank, yea lets see some pics of da horunna and now that your finaly here check out page 11