Tube Flat Bed/Exo/Buildup on my 85 ex cab Updated pics 10-16-06

Started by Rockdiver, July 10, 2005, 08:49:30 PM

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 2 3 4 5
User actions

rednk1980

#90
December 16, 2006, 07:15:08 PM
If you dont mind im gonna barrow your design for the front ive pondering it for a while and i like your ALOT! Good job on the exo hope mine turns out that nice.  :bowdown:
HOLD ON TIGHT! :driving: :hammerhead:
1983 Toyota SR5 long box bobbed 17" doved 14" bed cage, 22re, w56 tranny, working on dual cases 23 spline 4.70 twin sticks driveline disco. Dana 44 front, Dana 60 rear disk brakes and ff.

Rockdiver

#91
December 16, 2006, 07:17:21 PM
No worries copy away.  Let me know if you need any measurements

rednk1980

#92
December 16, 2006, 07:18:52 PM
Will do,  :thumbs:
HOLD ON TIGHT! :driving: :hammerhead:
1983 Toyota SR5 long box bobbed 17" doved 14" bed cage, 22re, w56 tranny, working on dual cases 23 spline 4.70 twin sticks driveline disco. Dana 44 front, Dana 60 rear disk brakes and ff.

alwayzbroken

#93
December 16, 2006, 07:22:39 PM
I love your truck. Keep it up  :biggthumpup:
If you still have control you aren't going fast enough

mad maud

#94
December 18, 2006, 03:57:00 PM
why cant we have snow like that here in engalnd, nice truck mate :cool:
IVE TRIED TO GIVE A DAM AND FAILED

alwayzbroken

#95
December 18, 2006, 04:05:23 PM
Quote from: mad maud on December 18, 2006, 03:57:00 PM
why cant we have snow like that here in engalnd, nice truck mate :cool:

Snow sucks you dont want it. It gets old.
If you still have control you aren't going fast enough

mad maud

#96
December 18, 2006, 04:19:48 PM
i dont mind the cold, makes drivin interesting too :driving:
IVE TRIED TO GIVE A DAM AND FAILED

Rockdiver

#97
December 18, 2006, 06:54:19 PM
Thanks Maud     Love the snow Hate the cold was about 10 degrees this morn  Drove to Fresno had Ice and snow all over didnt even melt till noon.

rednk1980

#98
December 18, 2006, 11:40:39 PM
 :driving: in snow and ice on the road SUCKS!! it takes all the fun out of driving
HOLD ON TIGHT! :driving: :hammerhead:
1983 Toyota SR5 long box bobbed 17" doved 14" bed cage, 22re, w56 tranny, working on dual cases 23 spline 4.70 twin sticks driveline disco. Dana 44 front, Dana 60 rear disk brakes and ff.

Rockdiver

#99
December 20, 2006, 08:32:54 PM
Did some work on the half doors.

Rockdiver

#101
December 31, 2006, 09:05:48 PM
Half Door Latches. Still have to weld cover on door handle hole.

rednk1980

#102
January 01, 2007, 01:56:27 AM
sweet dude those half doors look awsome. My exo didn't work out by the way.  :down:
HOLD ON TIGHT! :driving: :hammerhead:
1983 Toyota SR5 long box bobbed 17" doved 14" bed cage, 22re, w56 tranny, working on dual cases 23 spline 4.70 twin sticks driveline disco. Dana 44 front, Dana 60 rear disk brakes and ff.

MR_DIY

#103
January 01, 2007, 08:31:34 AM
nice job man... I love the 1/2 doors  :beerchug:
I'm going yota JUST so I can buy from Marlin more.

*quote*-  goes to show that a ramp hero doesn't always have what it takes to be a trail hero as well.

Rockdiver

#104
January 01, 2007, 08:41:51 AM
Quote from: rednk1980 on January 01, 2007, 01:56:27 AM
sweet dude those half doors look awsome. My exo didn't work out by the way.  :down:
What No Exo?

Stinky

#105
January 01, 2007, 06:28:23 PM
u runnin a tube from by the cowl area of the front exo clip tube to the slider??

just curious, looks a little empty there...
87 p/u SAS, 22RE, built, then cut up and scrapped

94 ex cab P/U, SR5, fully loaded, 3.4 swap, r150f, a/c, bumpers, 33s, glass fenders...sold

00 Stoopid Duty 250, ex cab, lariat, v-10,000

94 reg cab, 22re, duals, 38.5 boggers, sas, 4 link, tube bed, build underway... http://pirate4x4.com/forum/showthread.php?t=967836

88 Samurai, soa, buick 3.8, th350, zuki case, 1/4 done... anyone wanna buy it??

rednk1980

#106
January 01, 2007, 06:44:42 PM Last Edit: January 01, 2007, 08:32:36 PM by rednk1980
Quote from: Rockdiver on January 01, 2007, 08:41:51 AM
What No Exo?

no when i welded the gussets onto the cage it warped because i was getting in a hurry and forgot to put the cage back on the truck before i welded them  :smack: oh well live and learn
HOLD ON TIGHT! :driving: :hammerhead:
1983 Toyota SR5 long box bobbed 17" doved 14" bed cage, 22re, w56 tranny, working on dual cases 23 spline 4.70 twin sticks driveline disco. Dana 44 front, Dana 60 rear disk brakes and ff.

Rockdiver

#107
January 01, 2007, 08:30:50 PM
Quote from: Stinky on January 01, 2007, 06:28:23 PM
u runnin a tube from by the cowl area of the front exo clip tube to the slider??

just curious, looks a little empty there...
Yes  Have those on both sides to add and one over the wipers  and something over sun roof
And Then I will Have the Full Jungle Gym

Stinky

#108
January 01, 2007, 08:39:36 PM
nice...ure bed makes me wanna make one REALLY bad...shits awesome man...keep up the good work
87 p/u SAS, 22RE, built, then cut up and scrapped

94 ex cab P/U, SR5, fully loaded, 3.4 swap, r150f, a/c, bumpers, 33s, glass fenders...sold

00 Stoopid Duty 250, ex cab, lariat, v-10,000

94 reg cab, 22re, duals, 38.5 boggers, sas, 4 link, tube bed, build underway... http://pirate4x4.com/forum/showthread.php?t=967836

88 Samurai, soa, buick 3.8, th350, zuki case, 1/4 done... anyone wanna buy it??

smalltowncowboy

#109
January 01, 2007, 11:49:57 PM
just an observation but why the lock on your half door?
one thing after another

Stinky

#110
January 02, 2007, 09:36:13 AM
Quote from: smalltowncowboy on January 01, 2007, 11:49:57 PM
just an observation but why the lock on your half door?

haha...i almost did the same, just to see wat people say...
87 p/u SAS, 22RE, built, then cut up and scrapped

94 ex cab P/U, SR5, fully loaded, 3.4 swap, r150f, a/c, bumpers, 33s, glass fenders...sold

00 Stoopid Duty 250, ex cab, lariat, v-10,000

94 reg cab, 22re, duals, 38.5 boggers, sas, 4 link, tube bed, build underway... http://pirate4x4.com/forum/showthread.php?t=967836

88 Samurai, soa, buick 3.8, th350, zuki case, 1/4 done... anyone wanna buy it??

Rockdiver

#111
January 03, 2007, 07:52:04 PM
It Made You Look Didnt It????   I had the latches already. If I had to buy I would have done the small stainless ones and bolted in

toynizzy

#112
January 22, 2007, 10:56:31 AM
thats a sweet build man!im gonna have to take some notes from ur playbook for my 85 in progress.what brand front fenders u have on there?those look good and look like they work well.the bed is sweet,i cant wait to get mine started,if u could do u know any of ur botom tube frame measurments,that would help me alot on mine.thanks for the info and the pics for ideas man.
85 xtra cab pretty stock for now but lots of stuff to come!!

DTB

#113
January 22, 2007, 02:47:22 PM
Those latches on the ½ doors are friggin' pimp! :pimp: i likey
RIP KYOTA
Quotetoyminator2000 – There has to be dumb people in order for there to be smart people
Low down & durrrrrrty Rock Stacking Web Wheeler :driving: Too many Yuppies..:shake:...Not enough Hippies :flamer:  Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco

Rockdiver

#114
January 22, 2007, 05:45:51 PM
Quote from: toynizzy on January 22, 2007, 10:56:31 AM
thats a sweet build man!im gonna have to take some notes from ur playbook for my 85 in progress.what brand front fenders u have on there?those look good and look like they work well.the bed is sweet,i cant wait to get mine started,if u could do u know any of ur botom tube frame measurments,that would help me alot on mine.thanks for the info and the pics for ideas man

The Front Fenders are hanneman  Not sure which measurement you need But I did save most measurements the cab hoop and bed main hoop work out to be the same bends just longer legs . Just let me know what you need measured.

[/quote]
Quote from: Dirt Toy Boy on January 22, 2007, 02:47:22 PM
Those latches on the ½ doors are friggin' pimp! :pimp: i likey
Thanks Man.  It took a long while to come up with something different

Rockdiver

#115
January 28, 2007, 03:43:58 PM
Well hav'nt done much to the truck lately. Moving on from my job of 23 years and packed up all my tools. I did manage to lose a Power Tank on the road. (Making safety Chain for New one). Found this Cool Picture on the Power Tank Info Though.

alwayzbroken

#116
January 29, 2007, 09:45:40 AM
www.ultimate-air.com much cheaper and a quality product
If you still have control you aren't going fast enough

hollywood_toy90

#117
February 07, 2007, 12:06:14 PM
man i really like your bed idea, i have been thinking of doing one pretty much exactly like it, im glad i go to see one similar to the one in my head before i build mine, it is form and function all in one its perfect!!! :thumbs:

Rockdiver

#118
May 18, 2007, 10:24:01 AM
Before & After shots and how this all got started .   first was sliders and bumper, Then Fiberglass fenders,Then I added marlins front 5 " springs Then a week later a buddy called  and asked if i wanted a free orbit suspention and get my truck in a buildup shoot.  well after all I that I had to go all the way. I dont see an end to this madness.     For Sale and Start again?

Rockdiver

#119
May 18, 2007, 10:28:48 AM
I think its time to find a 3RZ    Any sugestions as what to do next   I am going to finish the half doors soon
Print
Go Up Pages 1 2 3 4 5
User actions