Author Topic: My new running gear (Read 82438 times)

gotrocks · « **Reply #30 on:** Aug 25, 2005, 07:16:12 AM »

who's arms did you use

RHG · « **Reply #31 on:** Aug 26, 2005, 10:02:29 PM »

I'll trade you my left arm and leg for that couger! Who's is it? Oh yeah and by the way, the truck is lookin sweeeet

toybuilt · « **Reply #32 on:** Aug 28, 2005, 09:22:45 AM »

Heres my blazer again and the 4.3 v6 engine for my toy.

crawlerdan · « **Reply #33 on:** Aug 28, 2005, 07:42:47 PM »

is that a jack ball on your intake?? oh ya, i put that there

toybuilt · « **Reply #34 on:** Aug 30, 2005, 10:28:45 AM »

Quote from: gotrocks on Aug 25, 2005, 07:16:12 AM

who's arms did you use

On the 60 I have WFO high steer cross over with the tie rod in the back, its going to be bad a$$

toybuilt · « **Reply #35 on:** Aug 30, 2005, 10:55:30 AM »

Quote from: rocks hurt good on Aug 26, 2005, 10:02:29 PM

I'll trade you my left arm and leg for that couger! Who's is it? Oh yeah and by the way, the truck is lookin sweeeet

You mean this 67 Cougar, its my brothers but he has been talking about selling it.

toybuilt · « **Reply #36 on:** Aug 30, 2005, 11:09:36 AM »

Heres how far I got on the front end the other day.

toybuilt · « **Reply #37 on:** Aug 30, 2005, 04:48:09 PM »

Ok I was able to put my 60 under my truck today because I finely got my day off!

gotrocks · « **Reply #38 on:** Aug 30, 2005, 11:47:36 PM »

wow man its looking awesome Keep upt he good work. I forget what springs are you using agian

RHG · « **Reply #39 on:** Aug 31, 2005, 10:03:26 AM »

Thats sweet. The lil tires are sooo cute. Are you planning on running a chevy 5 speed tranny? Thats a T5 from Borg Warner, I dunno if there is a difference between a truck T5 and a car T5 but the ones in cars are P.O.S! I guess though in a toy it would be fine cause most the stress and torque is behind the t-cases. I'd do a lil research if you havnt already. Wouldnt want to put a garbage tranny in there. How much for the Couger and whats wrong with it? Gees, this is all I need another toy.

Northern Runner · « **Reply #40 on:** Sep 02, 2005, 05:15:03 PM »

What springs are you using? Did you have to shorten the one side of the 60 and machine the spring pad?

toybuilt · « **Reply #41 on:** Sep 20, 2005, 09:43:16 AM »

The springs I'm running are Rancho 44044's in the front and chevy 63" three pack in the rear.

Heres what I was up to on sunday.

crawlerdan · « **Reply #42 on:** Sep 20, 2005, 12:01:54 PM »

you make me so proud some times

thats my boy... happy sawsalls to all

Northern Runner · « **Reply #43 on:** Sep 20, 2005, 05:04:22 PM »

She's lookin good....

bye the way who is WFO??

toybuilt · « **Reply #44 on:** Sep 20, 2005, 05:34:31 PM »

Their a smaller company in between Auburn, CA. and Grass Valley, CA. There web site is www.wfoconcepts.com

toybuilt · « **Reply #45 on:** Sep 20, 2005, 09:23:17 PM »

Heres what I did today

crawlerdan · « **Reply #46 on:** Sep 20, 2005, 10:01:34 PM »

atta boy,, keep up the pics

4.3s10 · « **Reply #47 on:** Sep 22, 2005, 05:11:21 PM »

Quote from: rocks hurt good on Aug 31, 2005, 10:03:26 AM

Thats sweet. The lil tires are sooo cute. Are you planning on running a chevy 5 speed tranny? Thats a T5 from Borg Warner, I dunno if there is a difference between a truck T5 and a car T5 but the ones in cars are P.O.S! I guess though in a toy it would be fine cause most the stress and torque is behind the t-cases. I'd do a lil research if you havnt already. Wouldnt want to put a garbage tranny in there. How much for the Couger and whats wrong with it? Gees, this is all I need another toy.

I think the T-5 would be fine behind a 4.3. Chevy put them in 3rd generation IROC camaros with 305s and people killed them. I'm running a T-5 and it seems fine and my motors a little built up. If you dint beat it up it should be fine

RHG · « **Reply #48 on:** Sep 22, 2005, 08:38:04 PM »

Yeah, thats where I have seen them crap out. Behind the 305 they dont last long, idiot kids go stuff them behind a 350TPI and expect to drag race them.

Go straight to the good shiat T-56

Hmmm, how bout a t-56 connected to dual t-cases. Get good mileage on the freeway and lots of gears in low low.

Ramrod · « **Reply #49 on:** Sep 22, 2005, 08:42:20 PM »

that would be bad ass. I love driving my friends camaro with the six speed there is almost too many gears to choose from

toybuilt · « **Reply #50 on:** Sep 23, 2005, 08:05:58 PM »

I thought about the six speed but there gears are taller and I I'm not sure if you could put a transfer case behind it. I'll be putting a grany four speed behind my 4.3 with a cloon and a 205

.

crawlerdan · « **Reply #51 on:** Sep 24, 2005, 08:05:30 AM »

klune-v extreme underdreive for those who dont speak aaron

To The Floor · « **Reply #52 on:** Sep 24, 2005, 11:43:09 AM »

SM465 witha dana 300/toyota dual transfer case from crashfab. that would be a sick setup. crashfab has a 4.3 with that drivetrain combo, he fabbed the adapter for the dana 300 to toyota dual transfer case setup, its fawkin sweeet.

toybuilt · « **Reply #53 on:** Sep 24, 2005, 07:34:48 PM »

It sounds cool but the output shaft on a Dana 300 is to small for FWD thats why I'm going with the 205. The 205 output shaft is much bigger and I'm over building everything I can

.

toybuilt · « **Reply #54 on:** Sep 25, 2005, 10:46:01 PM »

Well today I cut out my stock wiring harness, I also pulled all the extra crap out that I didn't need in the engine bay. I decided to pull the front of my truck off to make it easier to work on

crawlerdan · « **Reply #55 on:** Sep 26, 2005, 08:16:59 AM »

um....i wish i was there to help

breaking stuff is fun

toybuilt · « **Reply #56 on:** Oct 11, 2005, 09:08:37 PM »

Well I cut my old motor mounts off the frame and ground it flush, so I'm ready for my 4.3 engine.My cluch came in a few days ago also, hopefully all get ny engine in in a week or two.

toybuilt · « **Reply #57 on:** Oct 11, 2005, 09:16:26 PM »

Here's my new Advanced Adaptor 4 core radiator. When I pulled it out of the box, I was shocked

to see someone has already bruzed it.

crawlerdan · « **Reply #58 on:** Oct 12, 2005, 08:05:38 AM »

thats freakin sweet dood, i hope that radiator doesnt leak, that looks pretty bad, espesially for what you paid for it! did you call a.a and tell em?

toybuilt · « **Reply #59 on:** Oct 12, 2005, 07:27:47 PM »

Well I"m getting a new radiator sent to me $Beer Chug\'n$

toybuilt [OP]

toybuilt [OP]

toybuilt [OP]

toybuilt [OP]

toybuilt [OP]

toybuilt [OP]

toybuilt [OP]

toybuilt [OP]

toybuilt [OP]

toybuilt [OP]

toybuilt [OP]

toybuilt [OP]

toybuilt [OP]

toybuilt [OP]

Related Topics