Fender flares?

[Bigbadtoy]

anyone know where i can get a good set of fender flares for a 91 pickup? i run 33x12.50 tires and have gotten picked up too many times for too wide of tires i need flares any suggestions?

[No Power]

have you checked bush whacker fender flares?

[Rocksurfer]

Downey makes a fender that is already flared.

[RustyToy]

you got picked up for 12.5?   we are all in trouble then. i don't even have  a bed on my truck half the time. ( and i drive 100 miles a day. )

[Rocksurfer]

you got picked up for 12.5?   we are all in trouble then. i don't even have  a bed on my truck half the time. ( and i drive 100 miles a day. )

Hmm, I see that now I have 33x12.50's and I fit

[Bigbadtoy]

yeah the cops in good ole  plover Wisconsin are pricks

[Rocksurfer]

Check these out, maybe this is what you need up north there. They'll keep your rubber under cover and they won't rust.





http://www.downeyoff-road.com/BodyComponents/index.htm

[Rebeltilldeath3]

I got picked up for running 12.50"s too when I moved up north, I told the cop he's nuts.

I threw some Bushwhackers on, I hate flares, but I learned to live with 'em.  They don't look that bad either.

[Bigbadtoy]

rebel till death where u at?

[Salvo]

go to you local truck shop ... the ones that deal with the big rigs. they sell rubber flair material by the foot. If you take your time installing it it looks good. I got nailed to and had to do this. Cost me about $80 canadian much cheeper than bushwacker

[Rebeltilldeath3]

rebel till death where u at?

Pennsylvania, just moved from Georgia.

[WHITE_TRASH]

LOL you want BIG flares?  I got your big flares.   

[toyrolet]

Damn WT did you have to do that here in washington.  what are the laws anyhow?  i am doing a full width conversion on my 86 runner and need to know these things. I live in vancouver. Thanks

[WHITE_TRASH]

According to the laws any flare that sticks out more than 3" from the fender is illegal so technically going fill width is illegal.  BUT the laws about flares and mudflaps are simple.  The tires need to be coverec allt he way to the edge of the tread both front and rear.  The mudflaps need to be within 4" of the tire and they need to be down to the center of the axle tube minimum.

[toyrolet]

sweet thank you very much.

[Cheesemaker]

A local guy in town, has a first gen p/u with a modified bed, and for fenders, he's used the plastic single axle truck fenders, got them at the local truck shop.  Looks pretty sweet, try to get a pic the next time I see the truck!