Topic: 85 Pick up Hub stud torque specs needs

[badgas]

Hello

Newbie here getting to end of my first front axle rebuild.

I'm getting ready to install new studs to mount the Aisin locking hubs. I don't have a FSM and can't find these specs. Some say finger tight, a youtube by low range says to double nut and use an impact until they stop ? does anyone know the factory specs ?

Thank you for the help

[Mudder]

Do not use the low range method. I don't know what the actually values are but what I'd do is double but then and go until they stop by hand then a little more.

[Toyotadon]

You might try looking for a downloadable FSM.  I have one for the '83.

https://www.yotatech.com/forums/f115/fsm-nearly-all-years-factory-service-manual-156129/

[Slabzilla]

!4 lb-ft and blue loc-tite and no more than that.   

[badgas [OP]]

Thanks guys

I just snugged them with loc tite