Author Topic: Can an hd and stock t case mounts be used together? (Read 1627 times)

yjay · « **on:** Oct 03, 2010, 09:21:23 AM »

I have a budbuilt crossmember and need to replace one and would like to use a stock one if it will work with my Marlin hd one. I just need to know if they are the same height.
Thanks.

kneedownnate · « **Reply #1 on:** Oct 07, 2010, 10:31:15 PM »

Isn't the marlin mount meant as a bolt in replacement for a stocker?

yjay · « **Reply #2 on:** Oct 08, 2010, 05:39:27 AM »

Yes. But I don't know if it is the same height as the HD unit. The reason I ask is because I found them for a really good price and would like to use one with my the HD one I already have. They would need to be identical height to work.

OOPS · « **Reply #3 on:** Oct 08, 2010, 10:05:58 AM »

Guess you need to get one of these!!!! LOL

yjay · « **Reply #4 on:** Oct 08, 2010, 05:48:36 PM »

I would do that if I had a stock one. Thanks.

Cheesemaker · « **Reply #5 on:** Oct 12, 2010, 08:47:06 PM »

I've known some people who have ran both without any issues. Just need to mount the factory one first and loosely. Then HD, and tighten up. Cause the HD has slotted holes and the factory ones don't.

Author Topic: Can an hd and stock t case mounts be used together? (Read 1627 times)

yjay

Can an hd and stock t case mounts be used together?

kneedownnate

Re: Can an hd and stock t case mounts be used together?

yjay [OP]

Re: Can an hd and stock t case mounts be used together?

OOPS

Re: Can an hd and stock t case mounts be used together?

yjay [OP]

Re: Can an hd and stock t case mounts be used together?

Cheesemaker

Re: Can an hd and stock t case mounts be used together?

Related Topics


	Author Topic: Can an hd and stock t case mounts be used together? (Read 1627 times) 0 Members and 1 Guest are viewing this topic. yjay Crawler Guru Turtle Points: 1 Posts: 555 Member since Feb '09 SFA Station Wagon Can an hd and stock t case mounts be used together? « on: Oct 03, 2010, 09:21:23 AM » I have a budbuilt crossmember and need to replace one and would like to use a stock one if it will work with my Marlin hd one. I just need to know if they are the same height. Thanks. Logged 22re Daily Driver http://board.marlincrawler.com/index.php?topic=56568.0 91 4Runner-R151f, MC07,23 spline duals, Marlin 1200lb clutch, 85 Front axle, Leaf swap rear, Yukon 5.29's, BFG KM2 35's, Detroit, OBA, 280k kneedownnate Gold Turtle Award Turtle Points: 1128 Posts: 9,757 Member since Oct '04 Re: Can an hd and stock t case mounts be used together? « Reply #1 on: Oct 07, 2010, 10:31:15 PM » Isn't the marlin mount meant as a bolt in replacement for a stocker? Logged RIP KYOTA You can go through life being scared of the possible, or you can have a little fun and tease the inevitable. Give a man venison, he'll eat for a day. Teach a man to hunt Blacktail, he'll be frustrated for life! yjay [OP] Crawler Guru Turtle Points: 1 Posts: 555 Member since Feb '09 SFA Station Wagon Re: Can an hd and stock t case mounts be used together? « Reply #2 on: Oct 08, 2010, 05:39:27 AM » Yes. But I don't know if it is the same height as the HD unit. The reason I ask is because I found them for a really good price and would like to use one with my the HD one I already have. They would need to be identical height to work. Logged 22re Daily Driver http://board.marlincrawler.com/index.php?topic=56568.0 91 4Runner-R151f, MC07,23 spline duals, Marlin 1200lb clutch, 85 Front axle, Leaf swap rear, Yukon 5.29's, BFG KM2 35's, Detroit, OBA, 280k OOPS Rock Ninja The 2.5K Group Turtle Points: 1304 Posts: 2,561 Member since May '02 Re: Can an hd and stock t case mounts be used together? « Reply #3 on: Oct 08, 2010, 10:05:58 AM » Guess you need to get one of these!!!! LOL tape.JPG (63.63 kB, 640x480 - viewed 118 times.) Logged David & Theresa Fritzsche, 1990 Ex-Cab with a few mods!!!!!!!!! Roseville, CA Sobriety =Serenity yjay [OP] Crawler Guru Turtle Points: 1 Posts: 555 Member since Feb '09 SFA Station Wagon Re: Can an hd and stock t case mounts be used together? « Reply #4 on: Oct 08, 2010, 05:48:36 PM » I would do that if I had a stock one. Thanks. Logged 22re Daily Driver http://board.marlincrawler.com/index.php?topic=56568.0 91 4Runner-R151f, MC07,23 spline duals, Marlin 1200lb clutch, 85 Front axle, Leaf swap rear, Yukon 5.29's, BFG KM2 35's, Detroit, OBA, 280k Cheesemaker Rock Ninja Gold Turtle Award Turtle Points: 1363 Posts: 4,525 Member since Sep '04 Dean Tyler, you were an inspiration to all!! Re: Can an hd and stock t case mounts be used together? « Reply #5 on: Oct 12, 2010, 08:47:06 PM » I've known some people who have ran both without any issues. Just need to mount the factory one first and loosely. Then HD, and tighten up. Cause the HD has slotted holes and the factory ones don't. Logged Miss ya Dean (4THEWKN) & Kyle (KYOTA)!! 4THEWKN~9/17/2006 If it wasn't for you, I'd be driving something other than a Toyota! My build up ~ project Kilchis! http://board.marlincrawler.com/index.php?topic=32961.0 Zak's truck build ~ http://board.marlincrawler.com/index.php?topic=64319.0;topicseen