Author Topic: carb for 81 Toyota 22R (Read 2128 times)

toyrunner · « **on:** Jun 25, 2007, 06:31:59 AM »

I am looking for a stock carb for my 81 Toy. A clean parts carb, a running carb, whatever is easiest, best to do.
Thanks
Danny

fordh8r · « **Reply #1 on:** Jun 25, 2007, 08:38:24 AM »

where are you located?

toyrunner · « **Reply #2 on:** Jun 25, 2007, 02:30:41 PM »

Quote from: fordh8r on Jun 25, 2007, 08:38:24 AM

where are you located?

I are located in Ventura, Ca 93004
What have you?

fordh8r · « **Reply #3 on:** Jun 26, 2007, 12:14:55 AM »

Is it just the top piece you looking for? None of mine are from running vehicles and have been sitting for some time. Parts are ok but would need work to rebuild. I have 3 22r carbs. One has been taken apart, the other two are together with some small stuff scavenged off them. If you have a pic of the exact piece you need I can look closely at what I have to see if they match since they all have some variations of the little gizmos that came on them. Hopefully I have the one you're looking for. Be glad to help if I could.

Glen1978 · « **Reply #4 on:** Jun 26, 2007, 04:16:58 PM »

I have a couple of complete ones that were from running vehicles but have been sitting. They are complete though. $25 plus the USPS flat rate box ($8.XX, I think.)

toyrunner · « **Reply #5 on:** Jun 26, 2007, 07:27:16 PM »

Quote from: Glen1978 on Jun 26, 2007, 04:16:58 PM

I have a couple of complete ones that were from running vehicles but have been sitting. They are complete though. $25 plus the USPS flat rate box ($8.XX, I think.)

I would prefer a whole carb, the one I have was full of rat poop. Who knows what it would take to get it servicable.
Do you have pictures you could send me so I can see the port orientation?

fordh8r · « **Reply #6 on:** Jun 27, 2007, 12:03:15 AM »

You could even try taking the carb apart. Even if you're a little apprehensive about doing so, it's not like you've lost anything if you don't get it back together, right? Maybe just clean it out and unstick a few things is all it'll take. What have you got to lose? A carb kit should be between 20-30 bucks.

toyrunner · « **Reply #7 on:** Jun 27, 2007, 06:46:39 AM »

I am not askeered of carbs:inthedark: , except for this one!
It is toast from years of rat excrement going into it:puke: I did take the top off and saw it was gooped beyond all help!

Heck, when I started working on autos, carbs was the main option.
Anyway, that's where it is at.
The mains are all plugged and so is the enrichment valve.
Beyond repair, replacement times ahead.

fordh8r · « **Reply #8 on:** Jun 27, 2007, 07:30:32 AM »

Yuk!

Too bad it's in such shape. Not to mention, too bad we're like 5-6 hours apart to make any help more practical as well. Have you got any pics of the vac connections of the carb yet?

Glen1978 · « **Reply #9 on:** Jun 27, 2007, 03:44:01 PM »

Tried to pm you but your box is full. That price is for one carb. I can get pics but will be tomorrow evening.

toyrunner · « **Reply #10 on:** Jul 21, 2007, 06:38:17 PM »

Quote from: Glen1978 on Jun 26, 2007, 04:16:58 PM

I have a couple of complete ones that were from running vehicles but have been sitting. They are complete though. $25 plus the USPS flat rate box ($8.XX, I think.)

DO you still have these available? Are the carbs full of crud? I would like a good clean used carb...
let me know.
thanks
Danny

KYOTA · « **Reply #11 on:** Jul 21, 2007, 08:56:04 PM »

I have one off my 83 w/22R minus the base plate that I had to use for propane conversion. put yours on and your good to go, 3 screws piece of cake. pay shipping and you can have at it. PM me if you want it.

toyrunner · « **Reply #12 on:** Jul 22, 2007, 08:02:26 AM »

Quote from: KYOTA on Jul 21, 2007, 08:56:04 PM

I have one off my 83 w/22R minus the base plate that I had to use for propane conversion. put yours on and your good to go, 3 screws piece of cake. pay shipping and you can have at it. PM me if you want it.

Kyle,
Why thank you very much! I pm'd ya back my shipping info.
If there is anything I can help you with, please don't hesitate to ask
Danny

KYOTA · « **Reply #13 on:** Jul 22, 2007, 07:54:11 PM »

boxed up & ready to go to post office tomorrow

KYOTA · « **Reply #14 on:** Jul 23, 2007, 08:03:21 PM »

on its way Danny

toyrunner · « **Reply #15 on:** Jul 23, 2007, 08:25:53 PM »

Quote from: KYOTA on Jul 23, 2007, 08:03:21 PM

on its way Danny

Way to go, Kyle

How many $ was shipping?

KYOTA · « **Reply #16 on:** Jul 23, 2007, 09:20:30 PM »

was like 9 somethin

toyrunner · « **Reply #17 on:** Jul 24, 2007, 06:49:00 AM »

Quote from: toyrunner on Jul 23, 2007, 08:25:53 PM

Way to go, Kyle
How many $ was shipping?

how now to get it to you?!
I send it to you when I get the parcel, I'll have a return address
Danny

toyrunner · « **Reply #18 on:** Jul 28, 2007, 03:41:45 PM »

Kyle,
Carb arrived here today

I'll get $$ to you Monday.
Thanks
Danny

KYOTA · « **Reply #19 on:** Jul 28, 2007, 04:10:02 PM »

cool, hope its what you needed

toyrunner · « **Reply #20 on:** Jul 28, 2007, 05:38:37 PM »

Quote from: KYOTA on Jul 28, 2007, 04:10:02 PM

cool, hope its what you needed

I'll find out after dinner
Carbs are not interchangeable

The base will not fit on the carb. There is a casting that prevents this. I think it is for the metering jet. The jets sit differently from year to year.

toyrunner [OP]

toyrunner [OP]

toyrunner [OP]

toyrunner [OP]

toyrunner [OP]

toyrunner [OP]

toyrunner [OP]

toyrunner [OP]

toyrunner [OP]

Related Topics