Author Topic: anyone know the thread pitch on toyota wheel studs? (Read 4756 times)

yota-tota · « **on:** Jul 20, 2006, 05:53:52 AM »

one of the wheel studs on my 85 axle is chewed up and i need to pick up a die to clean it up so i can get the lug nut on. Anyone know the size i need? looks like a 16mm but i don't know the thread count.

79coyotefrg · « **Reply #1 on:** Jul 20, 2006, 06:32:43 AM »

i'll have to check but i think 14mm x 1.25

yota-tota · « **Reply #2 on:** Jul 20, 2006, 07:55:34 AM »

thanks man but i got the threads cleaned up and the lug nut on.....all it took was 5 min with the file to get rid of the burrs an a little bit of oil and it threaded on easy as pie

sof'indetermined · « **Reply #3 on:** Jul 20, 2006, 08:17:35 PM »

i realize you got it fixed but just for future reference they are 12 not 14 mmm studs.

Willy Mammoth · « **Reply #4 on:** Jul 20, 2006, 08:23:33 PM »

12mm 1.5 pitch.

Nissan is 12mm 1.25.

yota-tota · « **Reply #5 on:** Jul 22, 2006, 08:29:17 PM »

great guys thanks 8) i'll pick up the right die next time i'm out and aboot

cruzila · « **Reply #6 on:** Aug 05, 2006, 09:55:09 AM »

I would replace it. Do not take a chance on reusing a damaged thread on something that holds the tire/wheel on.

It should not be that hard to get a good used replacement.

scott

Cheesemaker · « **Reply #7 on:** Aug 05, 2006, 12:15:01 PM »

I agree with cruzilla on this! I've seen many people clean up the burrs only to have the lugnut seize up on the stud! And then you'll have to replace it anyway! The last thing you want to do is change a flat on the trail and have to break off a stud, and try to drive out with only 5 studs holding on the wheel!

Author Topic: anyone know the thread pitch on toyota wheel studs? (Read 4756 times)

yota-tota

anyone know the thread pitch on toyota wheel studs?

79coyotefrg

Re: anyone know the thread pitch on toyota wheel studs?

yota-tota [OP]

Re: anyone know the thread pitch on toyota wheel studs?

sof'indetermined

Re: anyone know the thread pitch on toyota wheel studs?

Willy Mammoth

Re: anyone know the thread pitch on toyota wheel studs?

yota-tota [OP]

Re: anyone know the thread pitch on toyota wheel studs?

cruzila

Re: anyone know the thread pitch on toyota wheel studs?

Cheesemaker

Re: anyone know the thread pitch on toyota wheel studs?

Related Topics


	Author Topic: anyone know the thread pitch on toyota wheel studs? (Read 4756 times) 0 Members and 1 Guest are viewing this topic. yota-tota Rock Master Turtle Points: 17 Posts: 232 Member since Oct '05 Crawling over Marlin anyone know the thread pitch on toyota wheel studs? « on: Jul 20, 2006, 05:53:52 AM » one of the wheel studs on my 85 axle is chewed up and i need to pick up a die to clean it up so i can get the lug nut on. Anyone know the size i need? looks like a 16mm but i don't know the thread count. Logged 91 toy truggy on h2 injection, hacked n chopped n locked n SAS'd rolling 36" IROKS........doubler comming soon 79coyotefrg Rock Ninja Gold Turtle Award Turtle Points: 1452 Posts: 22,633 Member since May '02 Solid axle Toys Rule ! ! ! Re: anyone know the thread pitch on toyota wheel studs? « Reply #1 on: Jul 20, 2006, 06:32:43 AM » i'll have to check but i think 14mm x 1.25 Logged AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/ 32/36weber, Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears RIP Nitro 9-29-07 I sure miss him $I\'m Down$ MarlinCrawlerInc IS NOT affiliated with TrailGear in any way yota-tota [OP] Rock Master Turtle Points: 17 Posts: 232 Member since Oct '05 Crawling over Marlin Re: anyone know the thread pitch on toyota wheel studs? « Reply #2 on: Jul 20, 2006, 07:55:34 AM » thanks man but i got the threads cleaned up and the lug nut on.....all it took was 5 min with the file to get rid of the burrs an a little bit of oil and it threaded on easy as pie Logged 91 toy truggy on h2 injection, hacked n chopped n locked n SAS'd rolling 36" IROKS........doubler comming soon sof'indetermined Rock Crawl'n Turtle Points: 0 Posts: 112 Member since May '06 Re: anyone know the thread pitch on toyota wheel studs? « Reply #3 on: Jul 20, 2006, 08:17:35 PM » i realize you got it fixed but just for future reference they are 12 not 14 mmm studs. Logged 83 yota that wheels 04 wrx wagon that hauls butt assorted crap that mostly doesnt do anything Willy Mammoth Gold Turtle Award Turtle Points: 0 Posts: 4,252 Member since Nov '04 Re: anyone know the thread pitch on toyota wheel studs? « Reply #4 on: Jul 20, 2006, 08:23:33 PM » 12mm 1.5 pitch. Nissan is 12mm 1.25. Logged American by birth, redneck by choice. Making Of http://board.marlincrawler.com/index.php?topic=6472.0 Sightings Of http://board.marlincrawler.com/index.php?topic=10805.0 yota-tota [OP] Rock Master Turtle Points: 17 Posts: 232 Member since Oct '05 Crawling over Marlin Re: anyone know the thread pitch on toyota wheel studs? « Reply #5 on: Jul 22, 2006, 08:29:17 PM » great guys thanks 8) i'll pick up the right die next time i'm out and aboot Logged 91 toy truggy on h2 injection, hacked n chopped n locked n SAS'd rolling 36" IROKS........doubler comming soon cruzila Go go cruzila! Hawk Silver Turtle Award Turtle Points: 41 Posts: 3,848 Member since May '02 MC20/21 Toybox #002 2.28 = 154:1 Re: anyone know the thread pitch on toyota wheel studs? « Reply #6 on: Aug 05, 2006, 09:55:09 AM » I would replace it. Do not take a chance on reusing a damaged thread on something that holds the tire/wheel on. It should not be that hard to get a good used replacement. scott Logged If you would like to help save the Rubicon, send money to the Rubicon Trail Foundation Friends of Eldorado National Forest Cheesemaker Rock Ninja Gold Turtle Award Turtle Points: 1363 Posts: 4,525 Member since Sep '04 Dean Tyler, you were an inspiration to all!! Re: anyone know the thread pitch on toyota wheel studs? « Reply #7 on: Aug 05, 2006, 12:15:01 PM » I agree with cruzilla on this! I've seen many people clean up the burrs only to have the lugnut seize up on the stud! And then you'll have to replace it anyway! The last thing you want to do is change a flat on the trail and have to break off a stud, and try to drive out with only 5 studs holding on the wheel! Logged Miss ya Dean (4THEWKN) & Kyle (KYOTA)!! 4THEWKN~9/17/2006 If it wasn't for you, I'd be driving something other than a Toyota! My build up ~ project Kilchis! http://board.marlincrawler.com/index.php?topic=32961.0 Zak's truck build ~ http://board.marlincrawler.com/index.php?topic=64319.0;topicseen