Pages: [1]   Go Down
 
Print
 

Author Topic: Timing Cover Bolts ?  (Read 4315 times)

0 Members and 1 Guest are viewing this topic.

Sweet Jane

  • Internet Lassies
  • Offline Rock Crawl'n
  • **
  • Turtle Points: 10
  • Female Posts: 81
    • Member since Mar '06
  • Nuts... "They're what's for dinner!"
    • View Profile
Timing Cover Bolts ?
« on: Mar 15, 2006, 09:45:35 AM »
Ok... We have a pair of '85 SR5 4x4's  Both have 22RE engines.
 We bought the FSM for that specific year... However the engines are from later year trucks...
The problem began with the top end rebuild... when Tim went to torque the Timing cover Bolt infront of the chain... it said torque to 9ft-lbs and that it should be an 8mm bolt... well it's a 12mm bolt as are a few of the cover bolts!
What should the 12mm Chain cover bolt be torqued to?
What about the Timing Cover?

We thought it was a PO quicky fix ... but he pulled the cover off another engine we have and it's also 12mm bolts where the manuals BOTH show 8mm and 10mm!


HELP!!
Logged



.... zippity doo dah... zippity eh?

Wermz84

  • Rock Nerd!
  • Offline Silver Turtle Award
  • *
  • Turtle Points: 921
  • Male Posts: 3,518
    • Member since May '05
  • Ouch My Eye!
    • View Profile
Re: Timing Cover Bolts ?
« Reply #1 on: Mar 15, 2006, 09:53:42 AM »
There is a reference guide in the back of the fsm for nut and bolt torque.  Just measure the bolt (ie. M4, M5) and take note of the markings on the markings on the head.  From here, cross reference to the guide and it should let you know the torque.. 

hope this helps.. :crossed:
Logged
I like to Drive!

79coyotefrg

  • Rock Ninja
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1452
  • Male Posts: 22,633
    • Member since May '02
  • Solid axle Toys Rule ! ! !
    • View Profile
    • HotSprings Superlift ORV park
Re: Timing Cover Bolts ?
« Reply #2 on: Mar 15, 2006, 10:17:04 AM »
oh my dear sweet wtzmom,  they are referring to the bolt diameter, not the size of the head  of the bolt,   8mm bolts have a 12mm head

10mm bolts have a 14mm head
Logged
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

  • Rock Ninja
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1452
  • Male Posts: 22,633
    • Member since May '02
  • Solid axle Toys Rule ! ! !
    • View Profile
    • HotSprings Superlift ORV park
Re: Timing Cover Bolts ?
« Reply #3 on: Mar 15, 2006, 10:17:57 AM »
water pump bolts are 6mm with a 10 mm head
Logged
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Sweet Jane [OP]

  • Internet Lassies
  • Offline Rock Crawl'n
  • **
  • Turtle Points: 10
  • Female Posts: 81
    • Member since Mar '06
  • Nuts... "They're what's for dinner!"
    • View Profile
Re: Timing Cover Bolts ?
« Reply #4 on: Mar 15, 2006, 10:18:29 AM »
THANK YOU!


Titty pic Just for you!


:greengrin:
Logged



.... zippity doo dah... zippity eh?

79coyotefrg

  • Rock Ninja
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1452
  • Male Posts: 22,633
    • Member since May '02
  • Solid axle Toys Rule ! ! !
    • View Profile
    • HotSprings Superlift ORV park
Re: Timing Cover Bolts ?
« Reply #5 on: Mar 15, 2006, 10:20:59 AM »
Quote from: WertyzMom on Mar 15, 2006, 10:18:29 AM
THANK YOU!


Titty pic Just for you!


:greengrin:
my email is coyotefrg70@wmconnect.com
Logged
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Wermz84

  • Rock Nerd!
  • Offline Silver Turtle Award
  • *
  • Turtle Points: 921
  • Male Posts: 3,518
    • Member since May '05
  • Ouch My Eye!
    • View Profile
Re: Timing Cover Bolts ?
« Reply #6 on: Mar 15, 2006, 10:21:10 AM »
Dang,  Lucky 79C   :tantrum:

 :hahaha:
Logged
I like to Drive!

BUBBA

  • Offline The 1K Club
  • *
  • Turtle Points: 16
  • Male Posts: 1,138
    • Member since Mar '05
  • this sucks
    • View Profile
Re: Timing Cover Bolts ?
« Reply #7 on: Mar 15, 2006, 10:21:26 AM »
Quote from: WertyzMom on Mar 15, 2006, 10:18:29 AM
THANK YOU!


Titty pic Just for you!


:greengrin:

dang if only I'd gotten here earlier  :sad2:
Logged
87 4runner 350 with custom dent package. 
My budget beater

Rocksurfer

  • Momentum Man
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 730
  • Male Posts: 13,860
    • Member since Jul '04
  • Lego Enforcement
    • View Profile
    • Spinnin4s 4x4 Club
Re: Timing Cover Bolts ?
« Reply #8 on: Mar 15, 2006, 10:22:06 AM »
Quote from: WertyzMom on Mar 15, 2006, 10:18:29 AM
THANK YOU!


Titty pic Just for you!


:greengrin:


I was saving that one for you Glen, you need it more than me!! :rofl:
Logged
The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

79coyotefrg

  • Rock Ninja
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1452
  • Male Posts: 22,633
    • Member since May '02
  • Solid axle Toys Rule ! ! !
    • View Profile
    • HotSprings Superlift ORV park
Re: Timing Cover Bolts ?
« Reply #9 on: Mar 15, 2006, 10:22:16 AM »
:eyebrow:
Logged
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Sweet Jane [OP]

  • Internet Lassies
  • Offline Rock Crawl'n
  • **
  • Turtle Points: 10
  • Female Posts: 81
    • Member since Mar '06
  • Nuts... "They're what's for dinner!"
    • View Profile
Re: Timing Cover Bolts ?
« Reply #10 on: Mar 15, 2006, 10:40:57 AM »
Yoiu know what's kinda sad/funny...
Tim has always "Mad Maxxed' it when fixing stuff... it says blah blah blah torque to 9ft lbs he just did it!
This was the first time he actually tried to 'dot every i and cross every T .. and it spun him pretty good for the priveledge!

Blah!

We are :emb:
Logged



.... zippity doo dah... zippity eh?

Wermz84

  • Rock Nerd!
  • Offline Silver Turtle Award
  • *
  • Turtle Points: 921
  • Male Posts: 3,518
    • Member since May '05
  • Ouch My Eye!
    • View Profile
Re: Timing Cover Bolts ?
« Reply #11 on: Mar 15, 2006, 10:47:23 AM »
Quote from: Rocksurfer on Mar 15, 2006, 10:22:06 AM

I was saving that one for you Glen, you need it more than me!! :rofl:
Ya can't blame me for trying.  right guys..

O' and

Logged
I like to Drive!
Pages: [1]   Go Up
 
Print
 
 
 
 

Related Topics
7 Replies
3058 Views 		Last post Jan 04, 2005, 07:29:49 PM
by toyoder
3 Replies
2145 Views 		Last post Jun 23, 2004, 09:13:55 PM
by Jared
20 Replies
5164 Views 		Last post Nov 22, 2004, 06:21:49 PM
by norcalyoter
2 Replies
1159 Views 		Last post Dec 14, 2005, 01:31:00 AM
by jimbo74
7 Replies
4813 Views 		Last post May 17, 2011, 09:39:59 PM
by dirtyrota