« on: Dec 10, 2013, 12:20:08 PM »
How much oil leakage is normal from the solenoid on my ARB locker? Routed a line from the solenoid to the undercarriage when I installed it to keep the spray out of the bed (compressor mounted in front of the wheel well inside a campershell). Read that if the o-ring deteriorates the extra oil making its way up the air line can foul the solenoid. After actuating the switch a I'll get a couple drops out of the bleed line and can hear the air/oil mix purge, normal/too much?? Time to replace the o-ring??
![](https://board.marlincrawler.com/Themes/MCI_V3C/images/ip.gif)
Logged
2000 3rz-fe 5-speed Tacoma x-cab Crawling Camper
ARB rear locker, ARB High volume compressor, 4.56, 33x12.5R15, King coil overs, 2" Donahoe progressive leaf pack, Bilstein 5100s, Dual battery, Warn x8000i, Swing out utility rear bumper, ARE DCU camper shell, Utility rack
Drive fast, drive slow, it does both, then I sleep in it when I get there.