Author Topic: Newbie To Board (Read 2621 times)

TRAWL HAULER · « **on:** Feb 24, 2005, 08:47:11 AM »

I just wanted to say hello to all. I have been into Toys for a long time. I just layed to rest a 88 runner that had a TPI 350, D44R w/Arb, F9 w/spool, th350, marlin and 37' krawlers.

I am currently building a 85 Runner with the old axles, putting Chrome moly axles and super joints from Randy's in the front. I am going to build a four link and run leafs, got to the R151f tranny with the 5.13 gear set, run a 4.7 marlin mated to a d300 with the 4.1 kit and I figure I will be with the 5.13 in the axles at about 498 to 1 crawl ratio.

Hope my axles hold

later

wheelinyotagirl · « **Reply #1 on:** Feb 24, 2005, 09:05:11 AM »

MUDJUNKY · « **Reply #2 on:** Feb 24, 2005, 04:44:56 PM »

mudaddict · « **Reply #3 on:** Feb 24, 2005, 10:45:59 PM »

Welcome

oddball · « **Reply #4 on:** Feb 25, 2005, 07:53:45 AM »

KWP · « **Reply #5 on:** Feb 25, 2005, 03:44:38 PM »

79coyotefrg · « **Reply #6 on:** Feb 25, 2005, 04:25:58 PM »

noob although it doesnt sound like your new just noo

did that make sence

so just where are you located???

Author Topic: Newbie To Board (Read 2621 times)

TRAWL HAULER

Newbie To Board

wheelinyotagirl

Re: Newbie To Board

MUDJUNKY

Re: Newbie To Board

mudaddict

Re: Newbie To Board

oddball

Re: Newbie To Board

KWP

Re: Newbie To Board

79coyotefrg

Re: Newbie To Board

Related Topics


	Author Topic: Newbie To Board (Read 2621 times) 0 Members and 1 Guest are viewing this topic. TRAWL HAULER Rock Crawl'n Turtle Points: -3 Posts: 14 Member since Feb '05 DEEP IN THE WHITE STUFF Newbie To Board « on: Feb 24, 2005, 08:47:11 AM » I just wanted to say hello to all. I have been into Toys for a long time. I just layed to rest a 88 runner that had a TPI 350, D44R w/Arb, F9 w/spool, th350, marlin and 37' krawlers. I am currently building a 85 Runner with the old axles, putting Chrome moly axles and super joints from Randy's in the front. I am going to build a four link and run leafs, got to the R151f tranny with the 5.13 gear set, run a 4.7 marlin mated to a d300 with the 4.1 kit and I figure I will be with the 5.13 in the axles at about 498 to 1 crawl ratio. Hope my axles hold later Logged D44R ARB/F9 Spool- R151F 5.13- 4.7M/D-300 4.1- 4 link w/leaf springs & Crawlers If you understand this than your either lying or just as sick as me wheelinyotagirl Internet Lassies Rock Master Turtle Points: 200 Posts: 274 Member since Jan '05 I'm awesome Re: Newbie To Board « Reply #1 on: Feb 24, 2005, 09:05:11 AM » Logged Go to www.friendsofthehighlakes.com and show your support, help reverse trail closures! MUDJUNKY Rock Master Turtle Points: -428 Posts: 364 Member since Dec '04 Crawling with Marlin Re: Newbie To Board « Reply #2 on: Feb 24, 2005, 04:44:56 PM » Logged "I avoid myspace like the devil himself... Nothing good can come from having teenyboppers and childmolesters mixed with emo morons hanging out in one place...." white trash. mudaddict The 1.5K Club Turtle Points: -82 Posts: 1,829 Member since Dec '04 Re: Newbie To Board « Reply #3 on: Feb 24, 2005, 10:45:59 PM » Welcome Logged 98 Taco- Super charged, sas'd, bobbed, locked,taco boxed with 39's Taco Build http://board.marlincrawler.com/index.php?topic=88901.0 I work At All Pro Off Road oddball 4WD Legend Turtle Points: 1143 Posts: 952 Member since Jan '05 Weirdo Re: Newbie To Board « Reply #4 on: Feb 25, 2005, 07:53:45 AM » Logged 2008 Tacoma regular cab, 4.88s, ARBs, crawl box, manual shift FJ case KWP 4WD Legend Turtle Points: 1 Posts: 878 Member since Jul '04 Ghost Hunter Re: Newbie To Board « Reply #5 on: Feb 25, 2005, 03:44:38 PM » Logged 88 Toyota truck ( Under Construction ) Dana 60's front and rear 5.38's, welded diffs, 3inch Downey rears up front,one link rear with aerostar coils rolling on 39.5x16.50/17 Pittbull Rockers and 17x9 Pro Comp extreme alloys.http://board.marlincrawler.com/index.php?topic=40816.0 79coyotefrg Rock Ninja Gold Turtle Award Turtle Points: 1452 Posts: 22,633 Member since May '02 Solid axle Toys Rule ! ! ! Re: Newbie To Board « Reply #6 on: Feb 25, 2005, 04:25:58 PM » noob although it doesnt sound like your new just noo did that make sence so just where are you located??? Logged AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/ 32/36weber, Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears RIP Nitro 9-29-07 I sure miss him $I\'m Down$ MarlinCrawlerInc IS NOT affiliated with TrailGear in any way