Author Topic: 22re timing chain (Read 2052 times)

puunui · « **on:** Oct 10, 2011, 05:38:54 PM »

having hard time taking off bolt on the crank pulley. I tried using the starter to remove the bolt. Anymore suggestions? thanks

Richmondo · « **Reply #1 on:** Oct 10, 2011, 07:19:25 PM »

Chain wrench, big 1/2" breaker bar, cheater pipe, some penetrating lubricant and a couple of buddies? I've always been apprehensive about the starter motor trick but when I did resort to it it always worked

2manytoys · « **Reply #2 on:** Oct 10, 2011, 07:26:30 PM »

I usually use an impact

emsvitil · « **Reply #3 on:** Oct 10, 2011, 07:27:52 PM »

Tranny in 5th, parking brake on to lock up engine.

Pipe on wrench (or breaker bar), sit down on ground and push with leg.

skylinetoy · « **Reply #4 on:** Oct 11, 2011, 06:31:53 PM »

Have had to use a torch and heat the bolt and then impact it off. Most of the time just an impact works though.

Yota87Truck · « **Reply #5 on:** Oct 11, 2011, 09:03:55 PM »

First time I pulled the pully I don't remember having a problem and I didn't have an impact gun at the time. I must have used a cheater pipe or something. But the past 2x I have done it I have had to torch it and impact it off.

79coyotefrg · « **Reply #6 on:** Oct 11, 2011, 10:00:13 PM »

if the idiot before you used red loctite then you will need a torch.

a half inch breaker bare up against the frame (pass side) always worked for me, well besides that one time

ascdub · « **Reply #7 on:** Oct 12, 2011, 12:40:24 AM »

I had to drop the oil pan and wedge ascrew driver between the block and crank andused a braker bar and the pipe from my floor jack. The e brake trick didnt work for me.

emsvitil · « **Reply #8 on:** Oct 12, 2011, 12:44:26 AM »

Need to be 5th with the ebrake.

4wd hi and bricks at the tires will help if the ebrake doesn't do it.

Author Topic: 22re timing chain (Read 2052 times)

puunui

22re timing chain

Richmondo

Re: 22re timing chain

2manytoys

Re: 22re timing chain

emsvitil

Re: 22re timing chain

skylinetoy

Re: 22re timing chain

Yota87Truck

Re: 22re timing chain

79coyotefrg

Re: 22re timing chain

ascdub

Re: 22re timing chain

emsvitil

Re: 22re timing chain

Related Topics


	Author Topic: 22re timing chain (Read 2052 times) 0 Members and 1 Guest are viewing this topic. puunui Rock Crawl'n Turtle Points: 0 Posts: 35 Member since Mar '08 22re timing chain « on: Oct 10, 2011, 05:38:54 PM » having hard time taking off bolt on the crank pulley. I tried using the starter to remove the bolt. Anymore suggestions? thanks Logged Richmondo Rock Crawl'n Turtle Points: -1 Posts: 102 Member since Jun '08 Re: 22re timing chain « Reply #1 on: Oct 10, 2011, 07:19:25 PM » Chain wrench, big 1/2" breaker bar, cheater pipe, some penetrating lubricant and a couple of buddies? I've always been apprehensive about the starter motor trick but when I did resort to it it always worked Logged Quote from: fortysixandtwo on Aug 27, 2008, 10:48:02 PM It was just crazy to see this deer leap all suicidal style off this embankment right in front of us. 2manytoys Crawler Guru Turtle Points: 490 Posts: 583 Member since Nov '09 Re: 22re timing chain « Reply #2 on: Oct 10, 2011, 07:26:30 PM » I usually use an impact Logged 88 Pickup SAS'd, 3.4 V6, R151F Hybrid, Dual Ultimate, Triple sticks, 35's, 5.29's, HP front, V6 rear, Aussies, 63" Chevs, Anti Wrap Bar, Warn 8274 on Home Built Bumper 4WU linked 86 Xtra Cab build in progress emsvitil Silver Turtle Award Turtle Points: 7571 Posts: 3,561 Member since May '07 Re: 22re timing chain « Reply #3 on: Oct 10, 2011, 07:27:52 PM » Tranny in 5th, parking brake on to lock up engine. Pipe on wrench (or breaker bar), sit down on ground and push with leg. Logged Ed SoCal 86 SR5 XtraCab 22RE W56B 31x10.50R15 skylinetoy Rock Crawl'n Turtle Points: -1 Posts: 16 Member since May '06 Re: 22re timing chain « Reply #4 on: Oct 11, 2011, 06:31:53 PM » Have had to use a torch and heat the bolt and then impact it off. Most of the time just an impact works though. Logged 85 Extracab, 3RZ, 35's, bobbed 83 w/3RZ on 39.5's in the works Yota87Truck The 1K Club Turtle Points: 2 Posts: 1,175 Member since Aug '06 Got Moab! Re: 22re timing chain « Reply #5 on: Oct 11, 2011, 09:03:55 PM » First time I pulled the pully I don't remember having a problem and I didn't have an impact gun at the time. I must have used a cheater pipe or something. But the past 2x I have done it I have had to torch it and impact it off. Logged Kane my 98 Tacoma on 33s: http://board.marlincrawler.com/index.php?topic=58357.0 SOLD:My 2WD project(possible work truck): http://board.marlincrawler.com/index.php?topic=84082.0 SOLD: POS - 87 Toy Pickup: http://board.marlincrawler.com/index.php?topic=30619.msg339450#msg339450 79coyotefrg Rock Ninja Gold Turtle Award Turtle Points: 1452 Posts: 22,633 Member since May '02 Solid axle Toys Rule ! ! ! Re: 22re timing chain « Reply #6 on: Oct 11, 2011, 10:00:13 PM » if the idiot before you used red loctite then you will need a torch. a half inch breaker bare up against the frame (pass side) always worked for me, well besides that one time Logged AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/ 32/36weber, Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears RIP Nitro 9-29-07 I sure miss him $I\'m Down$ MarlinCrawlerInc IS NOT affiliated with TrailGear in any way ascdub Rock Crawl'n Turtle Points: 32 Posts: 41 Member since Nov '08 Re: 22re timing chain « Reply #7 on: Oct 12, 2011, 12:40:24 AM » I had to drop the oil pan and wedge ascrew driver between the block and crank andused a braker bar and the pipe from my floor jack. The e brake trick didnt work for me. Logged emsvitil Silver Turtle Award Turtle Points: 7571 Posts: 3,561 Member since May '07 Re: 22re timing chain « Reply #8 on: Oct 12, 2011, 12:44:26 AM » Need to be 5th with the ebrake. 4wd hi and bricks at the tires will help if the ebrake doesn't do it. Logged Ed SoCal 86 SR5 XtraCab 22RE W56B 31x10.50R15