Author Topic: triple cases ? (Read 2130 times)

89 toy · « **on:** Dec 12, 2003, 10:00:47 PM »

now that i figured out what trans and tcases i have. is it possible to run 3 cases? im going to run a w56trans with a tcase off a g54 with a top shift adapter and the rear case will be off the w56. i have another tcase off a g54 is it possible to put that in the middle with a top shift kit?would i need just another adapter plate? it's just laying around why not use it just for shits and grins?

CruzrDave · « **Reply #1 on:** Dec 12, 2003, 10:23:18 PM »

Yes you can run a triple. You would need to make the rear case be a 23 spline. Two case in the front( 2.28:1 x 2.28:1 = 5.19:1 ) is to much torque for a 21 spline input gear.

89 toy · « **Reply #2 on:** Dec 12, 2003, 10:25:53 PM »

can i buy a 23 spline gear or do i need to find a 23 spline tcase from a turbo truck?

CruzrDave · « **Reply #3 on:** Dec 12, 2003, 10:33:43 PM »

You can still buy the gear from Toyota or us. The 23 spline coupler will come in the adapter kit just make that known when you order.

89 toy · « **Reply #4 on:** Dec 12, 2003, 10:35:56 PM »

or if i get a assembled 23 spline tcase with 4.7 gears from marlin what would i need to make that fit the tcase from the g54 tcase?

Author Topic: triple cases ? (Read 2130 times)

89 toy

triple cases ?

CruzrDave

Re:triple cases ?

89 toy [OP]

Re:triple cases ?

CruzrDave

Re:triple cases ?

89 toy [OP]

Re:triple cases ?

Related Topics


	Author Topic: triple cases ? (Read 2130 times) 0 Members and 1 Guest are viewing this topic. 89 toy Rock Master Turtle Points: -1198 Posts: 383 Member since Dec '03 Crawling with Marlin triple cases ? « on: Dec 12, 2003, 10:00:47 PM » now that i figured out what trans and tcases i have. is it possible to run 3 cases? im going to run a w56trans with a tcase off a g54 with a top shift adapter and the rear case will be off the w56. i have another tcase off a g54 is it possible to put that in the middle with a top shift kit?would i need just another adapter plate? it's just laying around why not use it just for shits and grins? Logged 89 ext cab sas with diamond +4 1/2" housing 30 spline longs and hub gears, hp elocker, six studs, arp studs in everything, taco rear with elocker. swaped out 22re for 3.4l supercharged, urd 2.0" pulley, urd fuel management, downey headers, flowmaster, cold air intake, marlin clutch that is straining to hold up CruzrDave Administrator Gold Turtle Award Turtle Points: 441 Posts: 4,631 Member since May '02 Re:triple cases ? « Reply #1 on: Dec 12, 2003, 10:23:18 PM » Yes you can run a triple. You would need to make the rear case be a 23 spline. Two case in the front( 2.28:1 x 2.28:1 = 5.19:1 ) is to much torque for a 21 spline input gear. Logged Taking back America, one part at a time! 89 toy [OP] Rock Master Turtle Points: -1198 Posts: 383 Member since Dec '03 Crawling with Marlin Re:triple cases ? « Reply #2 on: Dec 12, 2003, 10:25:53 PM » can i buy a 23 spline gear or do i need to find a 23 spline tcase from a turbo truck? Logged 89 ext cab sas with diamond +4 1/2" housing 30 spline longs and hub gears, hp elocker, six studs, arp studs in everything, taco rear with elocker. swaped out 22re for 3.4l supercharged, urd 2.0" pulley, urd fuel management, downey headers, flowmaster, cold air intake, marlin clutch that is straining to hold up CruzrDave Administrator Gold Turtle Award Turtle Points: 441 Posts: 4,631 Member since May '02 Re:triple cases ? « Reply #3 on: Dec 12, 2003, 10:33:43 PM » You can still buy the gear from Toyota or us. The 23 spline coupler will come in the adapter kit just make that known when you order. Logged Taking back America, one part at a time! 89 toy [OP] Rock Master Turtle Points: -1198 Posts: 383 Member since Dec '03 Crawling with Marlin Re:triple cases ? « Reply #4 on: Dec 12, 2003, 10:35:56 PM » or if i get a assembled 23 spline tcase with 4.7 gears from marlin what would i need to make that fit the tcase from the g54 tcase? Logged 89 ext cab sas with diamond +4 1/2" housing 30 spline longs and hub gears, hp elocker, six studs, arp studs in everything, taco rear with elocker. swaped out 22re for 3.4l supercharged, urd 2.0" pulley, urd fuel management, downey headers, flowmaster, cold air intake, marlin clutch that is straining to hold up