Author Topic: Differential Interchange (Read 1917 times)

gmrwizard · « **on:** Feb 04, 2006, 07:21:46 AM »

Got tired of spending days looking for a parts interchange, so I am going to ask.

Will a V6 diff out of a 2000 runner work in my 1988 rear axle?
I know up to '95 will but could not find out about the '95.5 and newer.

79coyotefrg · « **Reply #1 on:** Feb 04, 2006, 09:11:52 AM »

Quote from: gmrwizard on Feb 04, 2006, 07:21:46 AM

Got tired of spending days looking for a parts interchange, so I am going to ask.

Will a V6 diff out of a 2000 runner work in my 1988 rear axle?
I know up to '95 will but could not find out about the '95.5 and newer.

look at the axle code, if it says G294 then yes, but then again that code was changed in the newer trucks, measure the diameter of the mounting surface if the are the same, go for it

im thinking they will since i have a 05 elocker in my 79

gmrwizard · « **Reply #2 on:** Feb 05, 2006, 06:09:05 AM »

The diff is out of the truck and not close at hand. Found it on an auction sight.

79coyotefrg · « **Reply #3 on:** Feb 05, 2006, 08:47:51 AM »

if its a 8" third it will fit, if its the 8.4 it wont, i think the 8.4 was in some tacoma's and runners but yes if its a 8 inch it will bolt right up

gmrwizard · « **Reply #4 on:** Feb 06, 2006, 06:02:17 AM »

How do I tell if it is an 8" or 8.4"?

yotatilla · « **Reply #5 on:** Feb 06, 2006, 09:22:20 AM »

Tape measurer

Sam

Author Topic: Differential Interchange (Read 1917 times)

gmrwizard

Differential Interchange

79coyotefrg

Re: Differential Interchange

gmrwizard [OP]

Re: Differential Interchange

79coyotefrg

Re: Differential Interchange

gmrwizard [OP]

Re: Differential Interchange

yotatilla

Re: Differential Interchange

Related Topics


	Author Topic: Differential Interchange (Read 1917 times) 0 Members and 1 Guest are viewing this topic. gmrwizard Rock Master Turtle Points: -92 Posts: 199 Member since Nov '04 4 Wheelin Combat Style Differential Interchange « on: Feb 04, 2006, 07:21:46 AM » Got tired of spending days looking for a parts interchange, so I am going to ask. Will a V6 diff out of a 2000 runner work in my 1988 rear axle? I know up to '95 will but could not find out about the '95.5 and newer. Logged Beat to fit, Paint to match Need a bigger hammer and more paint. Did 75 Toyota (Downey 4X4 conversion Kit) Doing 88 Toyota 4X4 (Desert race truck) Next 81 Toyota 4x4 (drive train upgrade) 79coyotefrg Rock Ninja Gold Turtle Award Turtle Points: 1452 Posts: 22,633 Member since May '02 Solid axle Toys Rule ! ! ! Re: Differential Interchange « Reply #1 on: Feb 04, 2006, 09:11:52 AM » Quote from: gmrwizard on Feb 04, 2006, 07:21:46 AM Got tired of spending days looking for a parts interchange, so I am going to ask. Will a V6 diff out of a 2000 runner work in my 1988 rear axle? I know up to '95 will but could not find out about the '95.5 and newer. look at the axle code, if it says G294 then yes, but then again that code was changed in the newer trucks, measure the diameter of the mounting surface if the are the same, go for it im thinking they will since i have a 05 elocker in my 79 Logged AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/ 32/36weber, Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears RIP Nitro 9-29-07 I sure miss him $I\'m Down$ MarlinCrawlerInc IS NOT affiliated with TrailGear in any way gmrwizard [OP] Rock Master Turtle Points: -92 Posts: 199 Member since Nov '04 4 Wheelin Combat Style Re: Differential Interchange « Reply #2 on: Feb 05, 2006, 06:09:05 AM » The diff is out of the truck and not close at hand. Found it on an auction sight. Logged Beat to fit, Paint to match Need a bigger hammer and more paint. Did 75 Toyota (Downey 4X4 conversion Kit) Doing 88 Toyota 4X4 (Desert race truck) Next 81 Toyota 4x4 (drive train upgrade) 79coyotefrg Rock Ninja Gold Turtle Award Turtle Points: 1452 Posts: 22,633 Member since May '02 Solid axle Toys Rule ! ! ! Re: Differential Interchange « Reply #3 on: Feb 05, 2006, 08:47:51 AM » if its a 8" third it will fit, if its the 8.4 it wont, i think the 8.4 was in some tacoma's and runners but yes if its a 8 inch it will bolt right up Logged AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/ 32/36weber, Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears RIP Nitro 9-29-07 I sure miss him $I\'m Down$ MarlinCrawlerInc IS NOT affiliated with TrailGear in any way gmrwizard [OP] Rock Master Turtle Points: -92 Posts: 199 Member since Nov '04 4 Wheelin Combat Style Re: Differential Interchange « Reply #4 on: Feb 06, 2006, 06:02:17 AM » How do I tell if it is an 8" or 8.4"? Logged Beat to fit, Paint to match Need a bigger hammer and more paint. Did 75 Toyota (Downey 4X4 conversion Kit) Doing 88 Toyota 4X4 (Desert race truck) Next 81 Toyota 4x4 (drive train upgrade) yotatilla Rock Master Turtle Points: -160 Posts: 182 Member since Nov '05 Pretend Mechanic Re: Differential Interchange « Reply #5 on: Feb 06, 2006, 09:22:20 AM » Tape measurer Sam Logged 2 1986 4Runners+ 1 solid Axle+ 2 transfercases+ 4 35x14.5 Thornbirds+ 2 Aussie Lockers+ 1 Marlin SAS kit= UBER 4RUNNER