Author Topic: engin problems (Read 1325 times)

bigman · « **on:** May 14, 2005, 02:32:47 PM »

my 81 20 r carb runs great but when you stop at a stop sign or on the trail is does not want to idle

unless u put it in neutral and rev it up a lot. me and my dad think that there is a vacuum line that is in the wrong place.
any help would be great and a digram of all the vacuum lines and where they go

79coyotefrg · « **Reply #1 on:** May 14, 2005, 03:57:56 PM »

fuel cut solenoid, pass side of carb there is a small solenoid about the size of a pinkyfinger, with a wire comeing out of it, just hook it to something that comes on when the key is on,

kyle_22r · « **Reply #2 on:** May 14, 2005, 06:52:47 PM »

yes, without the idle solenoid hooked up it will NOT idle. i've got mine with homeade wiring(22R swap into an original 20R truck) and i knocked my quick connects apart when adjusting my valves. i thought i really screwed something up when i started it up, until i remembered to check my wire

bigman · « **Reply #3 on:** May 14, 2005, 07:16:32 PM »

we hooked the solenoid up a while ago and it did good until u put a full tank of gas in and then it started to blow black smoke and kick and snort so i took a vacuume line from the gas tank the gos into a big canaster and hooked it to the air filter end i dont know if that is were it goes

79coyotefrg · « **Reply #4 on:** May 15, 2005, 05:05:11 AM »

sounds like its trying to suck fuel thru the evap canister, you did right by removing the vacuum line, should have fixed it

Author Topic: engin problems (Read 1325 times)

bigman

engin problems

79coyotefrg

Re: engin problems

kyle_22r

Re: engin problems

bigman [OP]

Re: engin problems

79coyotefrg

Re: engin problems

Related Topics


	Author Topic: engin problems (Read 1325 times) 0 Members and 1 Guest are viewing this topic. bigman Rock Master Turtle Points: -10 Posts: 201 Member since Jan '05 punish all jeeps engin problems « on: May 14, 2005, 02:32:47 PM » my 81 20 r carb runs great but when you stop at a stop sign or on the trail is does not want to idle unless u put it in neutral and rev it up a lot. me and my dad think that there is a vacuum line that is in the wrong place. any help would be great and a digram of all the vacuum lines and where they go Logged MONTANA BOYS KICK A$$ IF U CANT DUCK IT F IT 79coyotefrg Rock Ninja Gold Turtle Award Turtle Points: 1452 Posts: 22,633 Member since May '02 Solid axle Toys Rule ! ! ! Re: engin problems « Reply #1 on: May 14, 2005, 03:57:56 PM » fuel cut solenoid, pass side of carb there is a small solenoid about the size of a pinkyfinger, with a wire comeing out of it, just hook it to something that comes on when the key is on, Logged AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/ 32/36weber, Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears RIP Nitro 9-29-07 I sure miss him $I\'m Down$ MarlinCrawlerInc IS NOT affiliated with TrailGear in any way kyle_22r The 1K Club Turtle Points: 530 Posts: 1,233 Member since Dec '03 yellow beast Re: engin problems « Reply #2 on: May 14, 2005, 06:52:47 PM » yes, without the idle solenoid hooked up it will NOT idle. i've got mine with homeade wiring(22R swap into an original 20R truck) and i knocked my quick connects apart when adjusting my valves. i thought i really screwed something up when i started it up, until i remembered to check my wire Logged bigman [OP] Rock Master Turtle Points: -10 Posts: 201 Member since Jan '05 punish all jeeps Re: engin problems « Reply #3 on: May 14, 2005, 07:16:32 PM » we hooked the solenoid up a while ago and it did good until u put a full tank of gas in and then it started to blow black smoke and kick and snort so i took a vacuume line from the gas tank the gos into a big canaster and hooked it to the air filter end i dont know if that is were it goes Logged MONTANA BOYS KICK A$$ IF U CANT DUCK IT F IT 79coyotefrg Rock Ninja Gold Turtle Award Turtle Points: 1452 Posts: 22,633 Member since May '02 Solid axle Toys Rule ! ! ! Re: engin problems « Reply #4 on: May 15, 2005, 05:05:11 AM » sounds like its trying to suck fuel thru the evap canister, you did right by removing the vacuum line, should have fixed it Logged AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/ 32/36weber, Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears RIP Nitro 9-29-07 I sure miss him $I\'m Down$ MarlinCrawlerInc IS NOT affiliated with TrailGear in any way