Pages: [1]   Go Down
 
Print
 

Author Topic: noob form NJ  (Read 3063 times)

0 Members and 1 Guest are viewing this topic.

unclejpl4x4

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 348
  • Male Posts: 3,522
    • Member since Apr '05
  • Broke & rusted
    • View Profile
    • myspace
    • Buy me a beer
noob form NJ
« on: Apr 12, 2005, 03:54:04 PM »
HI every one :wave:

I'm from southern NJ    and   have had my 93 toy pick up for some time now.
It has a 3" body lift and was nice loooking when i got it  but now just looks like a beat traill rig  that needs some loving.

I actualy have not been wheeling in a while do to I got hooked on a online game "planetside" :hammerhead:  and spent money on comp parts insted of truck parts. If U vist my web site U can see how outdated it is www.pinelands4x4.com

well it's time to do some loving to my truck and will be looking/asking ???
I turn wrenches for a living  atm i have been with cat for the last 5yrs+  my welding sucks but i am good with hydro/electrical/breaking stuff.
Logged
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

KWP

  • Offline 4WD Legend
  • *****
  • Turtle Points: 1
  • Male Posts: 878
    • Member since Jul '04
  • Ghost Hunter
    • View Profile
    • East Central Oklahoma Paranormal Society
Re: noob form NJ
« Reply #1 on: Apr 12, 2005, 05:43:41 PM »
  :welcome: to the board :beer:
Logged
88 Toyota truck ( Under Construction ) Dana 60's front and rear 5.38's, welded diffs, 3inch Downey rears up front,one link rear with aerostar coils rolling on 39.5x16.50/17 Pittbull Rockers and 17x9 Pro Comp extreme alloys.http://board.marlincrawler.com/index.php?topic=40816.0

FATB0Y

  • Offline The 2.5K Group
  • ****
  • Turtle Points: 0
  • Male Posts: 2,803
    • Member since Nov '04
    • View Profile
    • fatboy on my space.com
Re: noob form NJ
« Reply #2 on: Apr 12, 2005, 05:49:57 PM »
 :thumbs:  :welcome:
Logged

94toytruck

  • Offline Rock Master
  • ***
  • Turtle Points: 175
  • Male Posts: 142
    • Member since Jun '04
  • kreepykrawler
    • View Profile
    • rightcoast4x4
Re: noob form NJ
« Reply #3 on: Apr 12, 2005, 06:05:26 PM »
 :thumbs: east coast wheelers :greengrin:

You even make it to PAP or RC? We wheel there alot. Welcome to the board.
Logged
95 x-cab truggy, 39 pitbull's on KMC's and 60/14b with chromo's, ultimate duals, linked and Co'ed

www.rightcoast4x4.com<<<get it

No Power

  • Offline Rock Master
  • ***
  • Turtle Points: 200
  • Male Posts: 235
    • Member since Mar '05
  • Crawling with Marlin
    • View Profile
Re: noob form NJ
« Reply #4 on: Apr 12, 2005, 06:15:38 PM »
Howdy :welcome:
What kind of upgrades are you looking to do to your truck ???
Straight axle, diff gears, crawler box, bob & dovetail the bed, engine swap?
Logged
Roll me back over !!!

ozzy93xtra

  • Offline Rock Master
  • ***
  • Turtle Points: 127
  • Male Posts: 168
    • Member since Jan '05
  • NEWBIE FO' LIFE!
    • View Profile
Re: noob form NJ
« Reply #5 on: Apr 12, 2005, 06:49:31 PM »
 :beerchug:          its alright to have i.f.s (i got it 2)




























 :rivers: not really but money sure dont grow on trees Nice yota :thumbs:
Logged
M- I- S- S- I- S- S- I- P- P- I- B- O- U- N- D-

oddball

  • Offline 4WD Legend
  • *****
  • Turtle Points: 1143
  • Male Posts: 952
    • Member since Jan '05
  • Weirdo
    • View Profile
    • Buy me a beer
Re: noob form NJ
« Reply #6 on: Apr 12, 2005, 08:46:12 PM »
 :worthless: :beer:  :welcome:
Logged
2008 Tacoma regular cab, 4.88s, ARBs, crawl box, manual shift FJ case

scheid6996

  • Offline The 1K Club
  • *
  • Turtle Points: 0
  • Male Posts: 1,216
    • Member since Jan '05
    • View Profile
Re: noob form NJ
« Reply #7 on: Apr 12, 2005, 08:47:35 PM »
 :welcome:
Logged
When i die, i wana Be buried face down, so anyone who doesnt like me can kiss my :moon:


Its a redneck thing
"Nobody Loves Me"

unclejpl4x4 [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 348
  • Male Posts: 3,522
    • Member since Apr '05
  • Broke & rusted
    • View Profile
    • myspace
    • Buy me a beer
Re: noob form NJ
« Reply #8 on: Apr 13, 2005, 04:37:43 AM »
thx guys 

as for upgrades   the truck is my every day driver so  it can't be to much.  but i would like to add 3-4" under that body lift and a rear locker  and maybe 35"   

I need to straiting out the engine first and that broken leaf spring and shock from the last midnight trial run i did.  when a friend says o just jump that woop  "just say no"
Logged
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

gonzo

  • Offline Crawler Guru
  • ****
  • Turtle Points: 2000
  • Male Posts: 734
    • Member since Jan '05
  • Climb Baby Climb!
    • View Profile
    • My 8E6 runner
Re: noob form NJ
« Reply #9 on: Apr 13, 2005, 06:50:50 AM »
Hey Uncle :welcome: Got Pics?
Logged

unclejpl4x4 [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 348
  • Male Posts: 3,522
    • Member since Apr '05
  • Broke & rusted
    • View Profile
    • myspace
    • Buy me a beer
Re: noob form NJ
« Reply #10 on: Apr 13, 2005, 02:46:04 PM »
Quote from: gonzo on Apr 13, 2005, 06:50:50 AM
Hey Uncle :welcome: Got Pics?

http://www.pinelands4x4.com/   <----- clicky click   I don't have any new pics thos ones are year+ old  wish the truck still look like that :(
Logged
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

79coyotefrg

  • Rock Ninja
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1452
  • Male Posts: 22,633
    • Member since May '02
  • Solid axle Toys Rule ! ! !
    • View Profile
    • HotSprings Superlift ORV park
Re: noob form NJ
« Reply #11 on: Apr 13, 2005, 05:50:22 PM »
you really dont want more than 2 " body lift,   3-4 inch suspension lift and a little metal massageing is way better, lots more stable


saw a 94 toy today that got rolled dude had just put a 4 inch body lift and tires on it first bad curve he went into after leaving the shop he rolled it and the cab came off the frame  :smack:  :ack:
Logged
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

ozzy93xtra

  • Offline Rock Master
  • ***
  • Turtle Points: 127
  • Male Posts: 168
    • Member since Jan '05
  • NEWBIE FO' LIFE!
    • View Profile
Re: noob form NJ
« Reply #12 on: Apr 13, 2005, 06:30:36 PM »

Quote from: 79Coyotefrg on Apr 13, 2005, 05:50:22 PM
you really dont want more than 2 " body lift, 3-4 inch suspension lift and a little metal massageing is way better, lots more stable


saw a 94 toy today that got rolled dude had just put a 4 inch body lift and tires on it first bad curve he went into after leaving the shop he rolled it and the cab came off the frame :smack: :ack:


 :psss: whats he gonna do with that truck?
Logged
M- I- S- S- I- S- S- I- P- P- I- B- O- U- N- D-

TEXXX

  • Offline Crawler Guru
  • ****
  • Turtle Points: 814
  • Male Posts: 423
    • Member since Mar '05
  • Crawling in Cool, CA
    • View Profile
Re: noob form NJ
« Reply #13 on: Apr 13, 2005, 11:08:52 PM »
 :welcome:  :greengrin:
Logged
RIP Gatekeeper you will be missed!

86 4runner

  • Offline 4WD Legend
  • *****
  • Turtle Points: 0
  • Male Posts: 973
    • Member since Feb '05
  • SAS
    • View Profile
Re: noob form NJ
« Reply #14 on: Apr 14, 2005, 01:29:56 AM »
 :welcome:  :beer:
Logged
86 4 Runner SAS, 37 inch Toyo M/T's, E-Locker rear, Lock Right front. 30 spline Longs, 5.29's, Dual Cases, Warn XD9000i

unclejpl4x4 [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 348
  • Male Posts: 3,522
    • Member since Apr '05
  • Broke & rusted
    • View Profile
    • myspace
    • Buy me a beer
Re: noob form NJ
« Reply #15 on: Apr 14, 2005, 04:49:42 AM »
Quote from: 79Coyotefrg on Apr 13, 2005, 05:50:22 PM
you really dont want more than 2 " body lift, 3-4 inch suspension lift and a little metal massageing is way better, lots more stable


saw a 94 toy today that got rolled dude had just put a 4 inch body lift and tires on it first bad curve he went into after leaving the shop he rolled it and the cab came off the frame :smack: :ack:

Quote from: 79Coyotefrg on Apr 13, 2005, 05:50:22 PM
you really dont want more than 2 " body lift, 3-4 inch suspension lift and a little metal massageing is way better, lots more stable


saw a 94 toy today that got rolled dude had just put a 4 inch body lift and tires on it first bad curve he went into after leaving the shop he rolled it and the cab came off the frame :smack: :ack:


lol what a noob. 
 YA i got my truck with the 3" kit on it the truck was all pretty and shiny  no mud or dirt  not even under the hood , like never been off road clean.  THe truck dose have some  body roll   and i do nurse it around unknow turns   but the ones i drive around every day,  the truck handles nicley.
Logged
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

79coyotefrg

  • Rock Ninja
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1452
  • Male Posts: 22,633
    • Member since May '02
  • Solid axle Toys Rule ! ! !
    • View Profile
    • HotSprings Superlift ORV park
Re: noob form NJ
« Reply #16 on: Apr 14, 2005, 06:38:46 PM »
it looks sweet   


i think i'll stop and see what dudes gonna do with that rolled truck,



mine handles curves like a car , but suspension is a old blackdiamond from way back when
Logged
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

ozzy93xtra

  • Offline Rock Master
  • ***
  • Turtle Points: 127
  • Male Posts: 168
    • Member since Jan '05
  • NEWBIE FO' LIFE!
    • View Profile
Re: noob form NJ
« Reply #17 on: Apr 14, 2005, 07:09:03 PM »
Quote from: 79Coyotefrg on Apr 14, 2005, 06:38:46 PM
it looks sweet


i think i'll stop and see what dudes gonna do with that rolled truck,


 :thumbs:  :yesnod:  :beerchug:
Logged
M- I- S- S- I- S- S- I- P- P- I- B- O- U- N- D-
Pages: [1]   Go Up
 
Print
 
 
 
 

Related Topics
7 Replies
2451 Views 		Last post Jul 14, 2006, 05:10:46 PM
by Rocksurfer
11 Replies
1944 Views 		Last post Jan 14, 2007, 07:52:55 AM
by 88toyota
12 Replies
2749 Views 		Last post Oct 04, 2007, 04:23:48 PM
by fatt_matt
21 Replies
3710 Views 		Last post Jul 21, 2008, 06:39:32 PM
by Jaysen
2 Replies
1116 Views 		Last post Aug 17, 2009, 08:05:50 PM
by SLIVER