« on: Jan 26, 2011, 03:37:18 PM »
Hey thanks those pictures do help. I take it the welded plate in the middle is to raise the 4 little bolts that go into the rubber mount on the transmission itself up so they are protected from the rocks, or is it just extra thick to take the abuse?
Hey thanks those pictures do help. I take it the welded plate in the middle is to raise the 4 little bolts that go into the rubber mount on the transmission itself up so they are protected from the rocks, or is it just extra thick to take the abuse?
the small plate in the middle is to keep the lowest part of the trans case from knocking on the xmember and alsow alows the bolts to be resessed to keep a flat bottom
![](https://board.marlincrawler.com/Themes/MCI_V3C/images/ip.gif)
Logged
hilux 82 with mk3 2.4d engine. bobed 18 inches, full soft top, 9 inches of lift,exo cage,swing out tyre carrier, front tube winchbumper with x9, rock sliders, rear tube bumper, front truetrac and rear arb lockers, twin trans adapter with 4.7 crawler gears,20 forward and 4 reverse gears, 38 inch super swampers , rear disc brake conversion, trans disc parking brake, 5.29 r&p ,rear bench seat,hand throtle,custom storage boxes, custom made snorkel,onboard air compressor,cb twin bateries,split charge system, diff guards, low profile gearbox mo