Whew.....that disk should be like an on/off switch!
thats what i wanted! So i had some issues fitting this clutch. obviously the bellhouing adaptor is made to use a stock toyota clutch. i bolted the new one on and put the tranny up there and the clutch rubs on the inside of the bellhousing. i had to grind down the edges of the clutch flanges where it bolts to the flywheel. they were sticking out past the flywheel about 1/16 to an 1/8 all the way around. i got that all clearanced and sanded a few high spots around the inside of the bellhousing and I thin its good to go now!
