Topic: Message #479522

[toyotanner]

my next plans were going to take a bit. i got some 37" ssr's. i made a reciever hitch up front by putting a piece of box tube between the frame rails and attached a short piece of receiver tube to it. i got bored one day and put a 2nd gen grill in it. i did a 5 speed swap. and put a new clutch and resurfaced flywheel on. i put s10 springs out back i mounted them a different way than normal i cut my shackle hanger off and moved it back til i got the shackle angle i wanted. so with s10 springs moving my axle back 5 inches and the 5 speed tranny being 5 inches longer no need to mess with the driveline i put some stock toyota rears up front i took the overload out and replaced it with an isuzu spring. oh yeah with the rears up front i made another square tube front driveline. and a buddy of mine made me a crossmember for my tranny while i was busy with other things. i also started on some half doors.