Posting this from my build thread to see if anyone has ever come across this or has any help to offer. Thanks
So while attempting to address my low idle on cold start that I have been having lately. I took my throttle body and attached IAC off of my truck and cleaned it with throttle body cleaner. After re-assembling everything and firing up my truck I am idling at 2500 RPM that then creeps to above 3k RPM within 30 seconds. Everything is re-attached and I don't see where I could have caused a vacuum leak. I'm wondering if the throttle body cleaner I used toasted the IAC sensor. This one in particular:
Which is attached the IAC which is attached the the throttle body.
