The Pacific Northwest Roundup Convoy

Started by SqWADoosh, May 19, 2015, 09:50:05 AM

0 Members and 1 Guest are viewing this topic.

SqWADoosh

Myself, Zippo, Helipilot, LittleSteve, & Rockcrawlintoy are headed down in a convoy for the roundup this year. We would be happy to have anyone heading down I5 join us so we can roll in PNW deep  :shades: If you are interested post in this thread so we can work out the particulars. We will be leaving Seattle on the morning of the 16th and leaving the con the morning of the 20th.  :driving:

daniresch

I'm also going to be heading down I5 on the 16th, from Portland, OR. Are you guys towing? And any of you made the trip before?
This will be my 4th trip and I drive my truck all the way. I'll have one other rig coming along down with me who will also drive.

I usually drive down to Placerville, CA. Spend the night there and head out for the Rubicon next morning entering loon lake.
1988 Blue Std Cab: SAS, Longs, HP/ARB/5.29 Front, ARB/5.29 Rear, Marlin Dual Ultimate w/ 23 Spline MC07XD-R10, Marlin 30 Spline Front & Rear Output Shafts, Dave's Triple shifter, FROR crossmember, Bilstein 12" f+r, RUF w/ 63s, 7in bob, 40x13.5x17 MTR's on Racelines Monster Beadlocks 17x9.5

build: http://board.marlincrawler.com/index.php?topic=80954.510

Rockcrawlintoy

Placerville is the long way. Going through auburn is faster. We will be driving
Resident Jeep Guy
2007 JKU All Stock
ECV 7-11

daniresch

I have gone through Auburn before. It seemed longer because you have to drive slow through curvy, hilly back country roads. Do you drive south on hwy 49 from Auburn to Placerville and then east on hwy 50?

I found it easier to drive south on I5 to Sacramento and then turn east on to hwy 50, driving 65-70mph until I hit Placerville.
1988 Blue Std Cab: SAS, Longs, HP/ARB/5.29 Front, ARB/5.29 Rear, Marlin Dual Ultimate w/ 23 Spline MC07XD-R10, Marlin 30 Spline Front & Rear Output Shafts, Dave's Triple shifter, FROR crossmember, Bilstein 12" f+r, RUF w/ 63s, 7in bob, 40x13.5x17 MTR's on Racelines Monster Beadlocks 17x9.5

build: http://board.marlincrawler.com/index.php?topic=80954.510

Rockcrawlintoy

#4
49 to 193 to wentworth springs road. No reason to go to placerville. It will cut out a lot of driving. I have gone the placerville route and it adds at least an hour and a half
Resident Jeep Guy
2007 JKU All Stock
ECV 7-11

SqWADoosh

Quote from: daniresch on May 19, 2015, 01:44:37 PM
I'm also going to be heading down I5 on the 16th, from Portland, OR. Are you guys towing? And any of you made the trip before?
This will be my 4th trip and I drive my truck all the way. I'll have one other rig coming along down with me who will also drive.

I usually drive down to Placerville, CA. Spend the night there and head out for the Rubicon next morning entering loon lake.

No we will all be driving the rigs we will be wheeling in. No trailer queens for us. Hey man I'm taking my club down to Tillamook for the long weekend if you are out of Portland and want to meet 2 of us and get some wheeling in this weekend. We will be there from Thursday to Sunday. As for the route down I can't speak as to what is fastest. I'm the FNG when it comes to going to the roundup so I'll be listening to the advice that the guys who have been there before tell me. We would love to have you guys join the convoy though!

blackdiamond

Roundup and Moab?  That's a wheeling September!
1989 4Runner: Dual Ultimate (Inchworm front & Marlin 4.70 rear), Marlin Twin Stick, 1200-lb clutch, 4.88 R&P, Aussie Front, Detroit rear, 30-spline Longs, Long hub gears, ARP hub and knuckle studs & 35x12.50 Cooper STT PRO tires.  Marlin rear bumper & sliders.  FROR front bumper.  SAS with Alcan springs & Rancho 9000XL shocks.  Budbuilt Bolt-on traction bar.  Custom Interior Cage by Those Guys Rod and Customs.

Moab Tested & Rubicon Approved

SqWADoosh

Quote from: blackdiamond on May 19, 2015, 05:28:46 PM
Roundup and Moab?  That's a wheeling September!

Its going to be a crazy 2 and half weeks.

daniresch

Quote from: SqWADoosh on May 19, 2015, 02:54:46 PM
No we will all be driving the rigs we will be wheeling in. No trailer queens for us. Hey man I'm taking my club down to Tillamook for the long weekend if you are out of Portland and want to meet 2 of us and get some wheeling in this weekend. We will be there from Thursday to Sunday. As for the route down I can't speak as to what is fastest. I'm the FNG when it comes to going to the roundup so I'll be listening to the advice that the guys who have been there before tell me. We would love to have you guys join the convoy though!

Browns camp is my go-to wheeling spot! I work Thursday and will be in Bend Fri-Monday so i wont be about to make this trip out. But let me know if your ever coming down this way again,.
I'd recommend trying out firebreak5, crushers, and waterfall while you're there!

1988 Blue Std Cab: SAS, Longs, HP/ARB/5.29 Front, ARB/5.29 Rear, Marlin Dual Ultimate w/ 23 Spline MC07XD-R10, Marlin 30 Spline Front & Rear Output Shafts, Dave's Triple shifter, FROR crossmember, Bilstein 12" f+r, RUF w/ 63s, 7in bob, 40x13.5x17 MTR's on Racelines Monster Beadlocks 17x9.5

build: http://board.marlincrawler.com/index.php?topic=80954.510

SqWADoosh

Quote from: daniresch on May 20, 2015, 05:36:56 PM
Browns camp is my go-to wheeling spot! I work Thursday and will be in Bend Fri-Monday so i wont be about to make this trip out. But let me know if your ever coming down this way again,.
I'd recommend trying out firebreak5, crushers, and waterfall while you're there!

We are going to skip crushers. We all have to drive home and the trail looks like just asking for breakage. Not sure about waterfall. Will make a judgement call when I can get eyes on it in person.

daniresch

Quote from: Rockcrawlintoy on May 19, 2015, 02:47:28 PM
49 to 193 to wentworth springs road. No reason to go to placerville. It will cut out a lot of driving. I have gone the placerville route and it adds at least an hour and a half


Gotcha, okay. Are you planning on staying at Auburn for the night, or go straight to loon lake?
1988 Blue Std Cab: SAS, Longs, HP/ARB/5.29 Front, ARB/5.29 Rear, Marlin Dual Ultimate w/ 23 Spline MC07XD-R10, Marlin 30 Spline Front & Rear Output Shafts, Dave's Triple shifter, FROR crossmember, Bilstein 12" f+r, RUF w/ 63s, 7in bob, 40x13.5x17 MTR's on Racelines Monster Beadlocks 17x9.5

build: http://board.marlincrawler.com/index.php?topic=80954.510

SqWADoosh

Quote from: daniresch on May 20, 2015, 05:40:37 PM
Gotcha, okay. Are you planning on staying at Auburn for the night, or go straight to loon lake?

We are staying somewhere for the night. I don't believe Auburn is the name I heard. Somewhere that is like 2 hours out from Loon. Plan is to stop for sleep then hit it first light. We will be meeting up with a few guys in Cool.

Rockcrawlintoy

We can crash at my moms house in Chico. Or wherever. My mom said it was cool to leave tops and doors at her place
Resident Jeep Guy
2007 JKU All Stock
ECV 7-11

SqWADoosh

Quote from: Rockcrawlintoy on May 20, 2015, 08:16:30 PM
We can crash at my moms house in Chico. Or wherever. My mom said it was cool to leave tops and doors at her place

Thats the place. Couldn't remember the name.

RollBigReduction

I will be leaving Longview wa.  the 17th in the evening if everything goes right..  This will be the first MCR that we are attending.  We are looking people in wa. to run the MCR with. 

SqWADoosh

Quote from: RollBigReduction on August 01, 2015, 03:32:12 AM
I will be leaving Longview wa.  the 17th in the evening if everything goes right..  This will be the first MCR that we are attending.  We are looking people in wa. to run the MCR with.

Well the convoy plans have changed. The convoy is now leaving Monday the 14th and returning Sunday the 20th. 2 days in Fordyce has been added to the itinerary. That being said you are welcome to seek us out at the springs and camp with us. The more from WA the merrier. I will have at the very least a sign with my club's logo on it staked at the front of the camp. Looking into getting a flag that I can drape over my tent but don't know if that is going to be in the cards as I'm not even sure if I'm going to make it on the trip now.

blackdiamond

1989 4Runner: Dual Ultimate (Inchworm front & Marlin 4.70 rear), Marlin Twin Stick, 1200-lb clutch, 4.88 R&P, Aussie Front, Detroit rear, 30-spline Longs, Long hub gears, ARP hub and knuckle studs & 35x12.50 Cooper STT PRO tires.  Marlin rear bumper & sliders.  FROR front bumper.  SAS with Alcan springs & Rancho 9000XL shocks.  Budbuilt Bolt-on traction bar.  Custom Interior Cage by Those Guys Rod and Customs.

Moab Tested & Rubicon Approved

SqWADoosh


SqWADoosh

Got everything worked out. I'm going. Plan as it stands right now:

Truck 1: Myself & RockCrawlingJK
Truck 2: zippo and helipilot
Truck 3: LittleSteve and his Mrs.

Departure date: 09/14/15
Return date: 09/20/15
Departure time: 5:00 AM
Departure location: Seattle

We will be making the long drive all in one shot on the 14th until we reach Drew's mom's place in Chico where she has graciously offered to put us up for the night. We will then start our 6 days on the trails on the morning of the 15th. We will roll out of Chico and head into Fordyce for 2 days of wheeling. Mitch (84_yota_4wd) will meet us at our camp on the evening of the 15th and run the last day with us before we all head into the rubicon for the roundup early the morning of the 17th. We will head out first thing in the morning on the 20th for the long drive back home to the WA.  :driving: