2004 toyota tacoma truggy body with exo

Started by poor boy pulling, October 28, 2012, 12:30:08 PM

0 Members and 1 Guest are viewing this topic.

poor boy pulling

So this is a feeler, I am thinking about just building or buying a chassis instead of. Cutting this up any further, truck is 2004 Toyota Tacoma extra cab, the truck was rolled before the exo hence how it became a crawler ,  still has all its windowshat all open and are water tight, the rear slider is a lexan replacement, it's currently setup with a 3.4 5vzfe, Tacoma tranny and fully built Toyota cases. It's running coilovers in the front and stand alones in the rear, the frame has been plated, has three link brackets front and four link brackets rear. Interior is complete minus seat ( can be sold with it for alittle more) the doors open close with no issues. The driver outside handle is broke, but has electric windows that work like a champ. the dent shown in the driver door has been pulled.I'm sure I'm forgetting something, also for the right price I can leave my tranny and cases in the truck so you can just install a Toyota engine of your choosing.new pricenow 900.00!for the cab frame exo etc.  and we can always make a deal for leaving more parts in the truck, any questions feel free to ask




jimbo74

:usa:

The cost of freedom is always high, but Americans have always paid it. And one path we shall never choose, and that is the path of surrender, or submission.

~ John F. Kennedy ~

poor boy pulling

theres 4 pictures up, and location is Gardnerville NV

poor boy pulling

bump truck is still for sale, buyer backed out.  decided to leave the dash harness uncut as well

poor boy pulling

bump, truck is apart and on the trailer, left the brake master cylinder and clutch master along with the petal assembly.


tryn2Crawl

Pics as it currently sits. Interior, enbinebay, and of course exterior........Tittled?

houndhunter_14

Would you be willing to sell just clutch pedal assembly clutch master cylinder and the lines?

houndhunter_14



poor boy pulling



poor boy pulling

need to get this off my buddys trailer OBO make reasonable offer

nisota

bump for fair price wish I had some extra dollars good luck with the sell.
Oregon wheelin'
82' 2wd-4wd project
http://board.marlincrawler.com/index.php?topic=89180.0

poor boy pulling

Quote from: nisota on January 03, 2013, 10:08:24 AM
bump for fair price wish I had some extra dollars good luck with the sell.

thanks! also willing to sell tranny and cases with all the hydro,flywheel, etc all for 1200 on top of the cab price

poor boy pulling

now looking to sell supercharged 3.4 tranny and cases along with the body, lets make a package deal!!!

nisota

Got a question I spotted your solid t-case mounts on your crossmember, any complaints? did you run solid on motor too? Just seeing what other people did & had work for them, Thanks.
Oregon wheelin'
82' 2wd-4wd project
http://board.marlincrawler.com/index.php?topic=89180.0

poor boy pulling

tcase mounts are TG bomb proofs, they have a hard rubber in them, i had stock engine mounts so i was having trouble keeping the bolts in the skid tight, i think if you had the same engine mounts it would be great.

nisota

Quote from: poor boy pulling on January 08, 2013, 09:07:35 PM
tcase mounts are TG bomb proofs, they have a hard rubber in them, i had stock engine mounts so i was having trouble keeping the bolts in the skid tight, i think if you had the same engine mounts it would be great.

Ok good thought I have the bomb proof motor mounts So I will run them.
Oregon wheelin'
82' 2wd-4wd project
http://board.marlincrawler.com/index.php?topic=89180.0

85runner_

I have the solids at the motor and tcase. For a buggy its the way to go. Now for a street crwaler not so much.

sent from my galaxy s3


nisota

Quote from: 85runner_ on January 09, 2013, 11:49:43 AM
I have the solids at the motor and tcase. For a buggy its the way to go. Now for a street crwaler not so much.

sent from my galaxy s3



yea I don't plan on driving my truck on the street so that's what i figured.
Oregon wheelin'
82' 2wd-4wd project
http://board.marlincrawler.com/index.php?topic=89180.0


nisota

Oregon wheelin'
82' 2wd-4wd project
http://board.marlincrawler.com/index.php?topic=89180.0

nisota

4corredor Sent this message to me But it was meant for you poor boy so here it is.


4corredor:  Ok i just saw the rest of the truck.  So, you are asking $2500 for the engine, and $900 for the cab.  So the only thing left is the transmission.  Man, I which you had not pulled it apart.  What else is under the hood? and inside the cab?  Pictures?? Pakage price?
Oregon wheelin'
82' 2wd-4wd project
http://board.marlincrawler.com/index.php?topic=89180.0

poor boy pulling

Quote from: nisota on January 12, 2013, 11:23:12 AM
4corredor Sent this message to me But it was meant for you poor boy so here it is.


4corredor:  Ok i just saw the rest of the truck.  So, you are asking $2500 for the engine, and $900 for the cab.  So the only thing left is the transmission.  Man, I which you had not pulled it apart.  What else is under the hood? and inside the cab?  Pictures?? Pakage price?

thanks for the message

nisota

Oregon wheelin'
82' 2wd-4wd project
http://board.marlincrawler.com/index.php?topic=89180.0

poor boy pulling


poor boy pulling