Author Topic: pics from wyotech (Read 4489 times)

Skinny_Pedal · « **on:** Mar 01, 2005, 10:26:35 PM »

some pics of the trip from wyotech. ill be taking deisal,chassis fab/ hi-per motors....asm/advanced diesal are still in the air. class starts oct 3. i only took pics of the diesal class and the chassis fab class...so enjoy

Skinny_Pedal · « **Reply #1 on:** Mar 01, 2005, 10:28:21 PM »

Skinny_Pedal · « **Reply #2 on:** Mar 01, 2005, 10:29:17 PM »

Skinny_Pedal · « **Reply #3 on:** Mar 01, 2005, 10:29:52 PM »

need to resize the rest..tomarrow

mudaddict · « **Reply #4 on:** Mar 01, 2005, 10:44:39 PM »

im debating on if i want to go there after i attend uti!

WHITE_TRASH · « **Reply #5 on:** Mar 01, 2005, 10:46:38 PM »

That is one fugly willy's! Nice thought, BAD execution!

To The Floor · « **Reply #6 on:** Mar 01, 2005, 10:54:50 PM »

agreed, leave the tube alongside the hood and forget the fender protection and i'd like it, and raise that tube goin from the slider to the flatbed a little higher.

BigMike · « **Reply #7 on:** Mar 02, 2005, 01:11:11 AM »

Hey guys, my friend graduated from Wyotech last year; I'll have him check this topic out so he can add some advice for ya

Skinny_Pedal · « **Reply #8 on:** Mar 02, 2005, 07:00:02 AM »

the thing about tht exo though is how close it was to the body. 1/4"-3/8", very tight

CTENG in KS · « **Reply #9 on:** Mar 02, 2005, 07:28:16 AM »

Quote from: skinny_pedal on Mar 02, 2005, 07:00:02 AM

the thing about tht exo though is how close it was to the body. 1/4"-3/8", very tight

Bah...beat me to it, it is fugly but very tight...not that speed is an issue but it will greatly reduce the drag caused by the tubing. Good work, ugly design, function over form.

MUDJUNKY · « **Reply #10 on:** Mar 02, 2005, 08:33:19 AM »

im thinkin about going to wyotech

Hyena · « **Reply #11 on:** Mar 02, 2005, 04:19:42 PM »

The problem about it being that tight is it rubbing on the body going down the highway or any wheeling it will see. It will make noises like no other.

oddball · « **Reply #12 on:** Mar 02, 2005, 09:12:14 PM »

I JUST SENT MY APP TO UTI TODAY, AS SOON AS I GET TURNED DOWN FOR ADMISION I WILL TRY WYOTECH

mudaddict · « **Reply #13 on:** Mar 03, 2005, 09:52:10 AM »

haha its not to hard of a school to get into! but thats what i would ahve done as well!

TrackVino · « **Reply #14 on:** Mar 03, 2005, 10:04:01 AM »

I went to UTI, and Graduated. They dont turn nobody down, they just want your money. You should see some of the Yokals that went there.

oddball · « **Reply #15 on:** Mar 03, 2005, 10:30:49 AM »

YEAH I CAN BELIEVE THAT BUT I NEED TOTAL FINANCIAL ASSISTANCE SO ILL SEE, IS IT A DECENT SCHOOL? I WANT TO TAKE THE DIESEL COURSES

TrackVino · « **Reply #16 on:** Mar 03, 2005, 11:29:51 AM »

Thats what I took, then when I graduated, I came back to the Valley, and started working for Volvo GMC. I eventually became a road service tech for them. It was cool until I injured my back. Then it was all computers from then.

oddball · « **Reply #17 on:** Mar 03, 2005, 11:36:51 AM »

TOO BAD ABOUT YOUR BACK, THERE IS A TECH AT MY WORK THATS BEEN WRENCHING ON DIESELS FOR 25 YEARS OR SOMETHING LIKE THAT, HE HAS TO WEAR TWO HEARING AIDS, HE SAID ITS FROM ALL THE NOISE

Jared · « **Reply #18 on:** Mar 06, 2005, 04:48:46 PM »

I got accepted to wyotech and i was scheduled to go in july... Then we got a presentation from uti and i found out that if you score a certain percentage and average over 90% you get to attend The manufacturers program... Guess what, the manufacturers will pay your full tuition if you get that high percentage so i turned wyotech down and i got accepted to UTI>>> Wyotech isnt a bad school its just that UTI has a better program for my kind of liking... not to mention the 50% off of snap on tools and 1500$ worth of free tools they give you... The schedule is better.. its 6.5 hours a day instead of 8.5......

oddball · « **Reply #19 on:** Mar 06, 2005, 08:28:09 PM »

YEAH THAT SOUNDS COOL, I KIND OF PREFERED TO GO TO WYOTEC BECAUSE OF IT BEING IN WYOMING BUT THAT SHOULDNT MAKE ANY DIFFERANCE, RIGHT NOW IM WAITING TO HEAR BACK FROM THE GUY AT UTI

SWAMPER · « **Reply #20 on:** Mar 06, 2005, 08:33:52 PM »

I got accepted at UTI and everything but dint go throught with cause at the time I had financia difficulty and my dad was making 100g a year so no financial aid for Swampy

oddball · « **Reply #21 on:** Mar 06, 2005, 08:44:19 PM »

THATS THE MOST IMPORTANT THING RIGHT NOW FOR ME CAUSE I DONT HAVE THAT KIND OF MONEY

toy87 · « **Reply #22 on:** Mar 10, 2005, 12:33:13 AM »

i don't know if you fellas know but there is now a wyotec in Sacramento and i think they are opening one on the east coast somewhere. My brother was among the first class that graduated wyotec this December. Just thought some people might want to know there is a new campus and possibly another opening up

scheid6996 · « **Reply #23 on:** Mar 10, 2005, 12:41:54 AM »

ya the guy from tech came To my auto tech class and told us all about it, i think i wanna go to the one on Wyoming or Sacramento

scheid6996 · « **Reply #24 on:** Mar 10, 2005, 12:42:21 AM »

WYOTECK that is

TacoStewie · « **Reply #25 on:** Mar 20, 2007, 12:11:54 PM »

ya i went to Wyotech also. i saw that willies and the cage is crap. the welds looked like :pokeit:

it just goes to show that you may have the money to learn how to fab but some people just cant do it

Skinny_Pedal [OP]

Skinny_Pedal [OP]

Skinny_Pedal [OP]

Skinny_Pedal [OP]

Related Topics