brakes

Started by trollbum, February 19, 2005, 12:33:25 PM

0 Members and 1 Guest are viewing this topic.

trollbum

 well my passenger side caliper has a seized piston and the guy who sold me the truck included another caliper but i was wondering how much a new caliper would be. should i just get this spare one shaved for wheel clearance it looks like it's been sitting for a while so it's condtion is unknown (setup is 85 axle with ifs hubs and calipers, vented rotors)

i thought i'd ask cause brakes are a pretty important saftey device.

anyone have some mint calipers kicking around? :eyebrow:

79coyotefrg

if your not worthy of rebuilding you calipers, i would buy a new/rebuilt unit

like you said brakes are kinda nice when you need to stop
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Weldo

I got rebuilt calipers fro my 91 pick up from Advance Auto.  They even had em in stock!  They were the 4 piston ones, about $50 a piece i think it was......but the core charge was like $70 a piece!
Welders Hold the World Together!

trollbum

for core charge can't you just trade them your old calipers??

WHITE_TRASH

Full hydro, 186:1 with an auto and 44's what could go wrong??

79coyotefrg

if not pick up a set at the junkyard for $5 and use them as cores
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

trollbum

don't worry guys after i pick up another set from a parted out runner i should have 3 spares !! thats like 70*3= 210$ 

can you just trade them in without buying new ones?? i need the cash for engine repairs....