22re or 22ret shork block

Started by b_sherwood3, September 14, 2011, 01:09:21 PM

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

b_sherwood3

September 14, 2011, 01:09:21 PM
Does anyone know where I can buy either one of these short blocks.  I have a 22re engine in my shop,  it was two weeks old when the guy who had went in the water and cracked the block.  The head, crank and everything else is new just need a new block.  I have been looking,  I want to build this engine for a turbo.  Once completed I will have a 22re good running engine that is currently in my truck for sale.  Any help is appreciated.

87hillbillyoter

#1
September 14, 2011, 01:13:28 PM
:usa:
1987 SAS'ed toyota 4x4 pickup 22re swap
build up- http://board.marlincrawler.com/index.php?topic=75111.0
:usa:

bigarms23

#3
September 14, 2011, 06:22:27 PM
or from www.davezoffroadperformace.com will have one
88 4runner 2016 5.3 auto atlas 2 on tons and tons of fun

79coyotefrg

#4
September 14, 2011, 08:07:18 PM
Quote from: b_sherwood3 on September 14, 2011, 01:09:21 PM
Does anyone know where I can buy either one of these short blocks.  I have a 22re engine in my shop,  it was two weeks old when the guy who had went in the water and cracked the block.  The head, crank and everything else is new just need a new block.  I have been looking,  I want to build this engine for a turbo.  Once completed I will have a 22re good running engine that is currently in my truck for sale.  Any help is appreciated.
Ive got bad news for you. If he hydro locked the engine at enough RPM to crack a 22R block you need more than a block. those rods are bent, pistons cracked head cracked.  no way those aluminum parts didnt break and a cast steel block did.
The crank would be the only thing I can imagine would survive.
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

b_sherwood3

#5
September 15, 2011, 12:37:46 AM
The head is in great condition,  I have the new rods and I purchased some turbo pistons .040.  I wasn't really looking at buy a new block from lcengineering, they are a little pricey, I was just wondering if anyone had a used block they wanted to sell.  Thanks for the help guys. I am interested in a turbo exhaust manifold used if anyone has.  I Know LCengineering, and some other places have them for about 700. If I have too I will buy new, but was just looking for some used parts.

b_sherwood3

#6
September 15, 2011, 12:43:39 AM
I just looked at davesoffroadperformance for the first time and its a good site.  Thanks for the info.

Cheesemaker

#7
September 15, 2011, 09:39:15 PM
Going turbo will not be cheap.
Miss ya Dean (4THEWKN) & Kyle (KYOTA)!!

4THEWKN~9/17/2006  If it wasn't for you, I'd be driving something other than a Toyota!

My build up ~ project Kilchis! http://board.marlincrawler.com/index.php?topic=32961.0
Zak's truck build ~ http://board.marlincrawler.com/index.php?topic=64319.0;topicseen

dirtybird

#8
September 17, 2011, 10:51:43 PM
Where you located

b_sherwood3

#9
September 18, 2011, 03:17:04 AM
Lafayette, LA

dirtybird

#10
September 18, 2011, 05:40:07 AM
Oh well I'm in so cal was gonna say you can have mine if you pull it but that would be a heck of a drive!!! Try junk yard

b_sherwood3

#11
September 18, 2011, 06:30:23 AM
yeah it would be thanks anyways
Print
Go Up Pages1
User actions