Author Topic: Marlin Crawler 79-88 Short Bed Pickup Rear Bumper W/ D-Ring Recovery Shackles (Read 7575 times)

KDXSR5 · « **on:** Aug 26, 2011, 01:55:56 PM »

Located in Casper, WY

$250 PLUS SHIPPING

New $295 PLUS SHIPPING---> http://www.marlincrawler.com/armor/rear-bumper/rear-bumper-hilux-trucks

PLUS

New $15 A PIECE Recovery Shackles PLUS SHIPPING---> http://www.marlincrawler.com/armor/front-bumper/d-ring-shackle

That means NEW all of this costs $325 PLUS SHIPPING

This was the very first mod I did to my Toyota, but I now have to sell it because I am going flatbed. I had it professionally powdercoated gray before I installed it 5 years ago.

The bumper was used to protect the bed (which it did extremely well), although I never dropped down hard on this bumper; it is not bent or dented. All it has is lots of scratches from, well, being a bumper.

I never welded it on, so the bumper has not been modified in any way.

The bumper did go through 5 Wyoming winters, so it is a bit rusty. That is right, powdercoating doesn't even hold up here. Have no fear though, it is all surface rust that will clean up with a grinder. The rust does not affect the structure of the bumper.

With a grinder and some paint this bumper will look good as new. The same amount of work is put into a new bumper anyways, because they are shipped bare.

$250 PLUS SHIPPING

Local pickup or payment with money order plus shipping.

Reply to this thread or PM me with questions, offers, etc. I am looking for 12" Bilstein Shocks.

Thank you.

KDXSR5 · « **Reply #1 on:** Sep 13, 2011, 06:04:25 PM »

Anybody? I am always looking for trades too

let me know what you have!

santa cruz crawler · « **Reply #2 on:** Sep 14, 2011, 07:41:25 AM »

I have some stuff , I'm in Indiana, also have some relatives in Jackson hole wy
I have some third members I have some random parts
Let me know what you might be looking for ! Mabe some parts and some cash

KDXSR5 · « **Reply #3 on:** Sep 14, 2011, 10:33:44 PM »

Quote from: santa cruz crawler on Sep 14, 2011, 07:41:25 AM

I have some stuff , I'm in Indiana, also have some relatives in Jackson hole wy
I have some third members I have some random parts
Let me know what you might be looking for ! Mabe some parts and some cash

I am looking for a couple 5.29 diffs, open is fine. I am also looking for slightly used 12 inch travel shocks, preferably Bilstein. I am also looking for a t-case mounted parking brake.

santa cruz crawler · « **Reply #4 on:** Sep 15, 2011, 08:43:59 AM »

I got some bilstein remote gas Shocks 12" I'm pretty sure
But they have a little surface rust on the nickel plateing

Any way the work great ! No 529s. And no drive line e brake!

KDXSR5 · « **Reply #5 on:** Sep 15, 2011, 05:00:42 PM »

Quote from: santa cruz crawler on Sep 15, 2011, 08:43:59 AM

I got some bilstein remote gas Shocks 12" I'm pretty sure
But they have a little surface rust on the nickel plateing

Any way the work great ! No 529s. And no drive line e brake!

Throw up a picture and a part # so I can take a gander.

Bobby Hunter · « **Reply #6 on:** Sep 15, 2011, 08:32:54 PM »

how bout front and rear 400$ shipped

KDXSR5 · « **Reply #7 on:** Sep 16, 2011, 06:43:29 AM »

Quote from: Bobby Hunter on Sep 15, 2011, 08:32:54 PM

how bout front and rear 400$ shipped

Nah, the front stays with me

santa cruz crawler · « **Reply #8 on:** Sep 16, 2011, 04:07:06 PM »

http://i1186.photobucket.com/albums/z366/brandon_birt/b5e9951a.jpg
Here's a picture , Before they got surface rust!

Got them from a buddy ? I know there's a part # just don't see it

KDXSR5 · « **Reply #9 on:** Sep 16, 2011, 05:10:54 PM »

Quote from: santa cruz crawler on Sep 16, 2011, 04:07:06 PM

http://i1186.photobucket.com/albums/z366/brandon_birt/b5e9951a.jpg
Here's a picture , Before they got surface rust!

Got them from a buddy ? I know there's a part # just don't see it

They look a bit more used than what I was looking for, unfortunately.

yota4runnernut · « **Reply #10 on:** Sep 16, 2011, 10:02:06 PM »

I Want the bumper!
Shipping to 81435 business?
I also have a set of bilstein, I will get the part # and photos tomorrow. they were used for a very short time then I went air, been stored inside their whole life, no rust! can be reached at yota4runnernut@yahoo.com

yota4runnernut · « **Reply #11 on:** Sep 19, 2011, 12:34:34 AM »

Let me know if you get a shipping price, or wanna met up and do some wheeling. I am in Colorado 81435. I nwill get a photo of the shocks while i am at the shop tomorrow.

KDXSR5 · « **Reply #12 on:** Sep 19, 2011, 07:24:17 AM »

Quote from: yota4runnernut on Sep 19, 2011, 12:34:34 AM

Let me know if you get a shipping price, or wanna met up and do some wheeling. I am in Colorado 81435. I nwill get a photo of the shocks while i am at the shop tomorrow.

Sorry for the lag, I have to wait until today to get a quote becuase I am shipping from a business. Please snap a pic of the shocks and get the part # today if you can. Thank you.

yota4runnernut · « **Reply #13 on:** Sep 19, 2011, 03:57:01 PM »

Damn! my shocks were the 10". I tried. don't have anything else on your list. but a lot of Toyota parts if you need something else. If not cash is king!

JustDSM · « **Reply #14 on:** Oct 03, 2011, 12:17:13 PM »

If you would be willing to take $275 and cover the shipping I'll paypal you as soon as you say "yes". I'm in Las Cruces, NM 88012.

For fastest reply, please email me at justdsm at hotmail dot com.

Justin

KDXSR5 · « **Reply #15 on:** Nov 05, 2011, 01:28:58 PM »

The bumper is still available! Trades, deals etc. lets hear them!

FREAKY BEHAVIOR · « **Reply #16 on:** Nov 16, 2011, 10:08:29 PM »

Are these a lot more different than the ones for 79-83 trucks?

KDXSR5 · « **Reply #17 on:** Nov 17, 2011, 10:02:11 PM »

Quote from: FREAKY BEHAVIOR on Nov 16, 2011, 10:08:29 PM

Are these a lot more different than the ones for 79-83 trucks?

The same bumper is sold for 79-88 short bed trucks.

JustDSM · « **Reply #18 on:** Dec 09, 2011, 12:27:42 PM »

Still got this? I'd like to pick it up if you do.

KDXSR5 · « **Reply #19 on:** Dec 15, 2011, 12:53:05 AM »

Yes, I do still have the bumper. I apologize for the late reply, again. We can work it through PM or e-mail, whatever is more convenient for you. Get back to me in your preferred method. Thank you.

KDXSR5 [OP]

KDXSR5 [OP]

KDXSR5 [OP]

KDXSR5 [OP]

KDXSR5 [OP]

KDXSR5 [OP]

KDXSR5 [OP]

KDXSR5 [OP]

KDXSR5 [OP]

Related Topics