Marlin Crawler 79-88 Short Bed Pickup Rear Bumper W/ D-Ring Recovery Shackles

[KDXSR5]

Located in Casper, WY

$250 PLUS SHIPPING


New $295 PLUS SHIPPING---> http://www.marlincrawler.com/armor/rear-bumper/rear-bumper-hilux-trucks

PLUS

New $15 A PIECE Recovery Shackles PLUS SHIPPING---> http://www.marlincrawler.com/armor/front-bumper/d-ring-shackle

That means NEW all of this costs $325 PLUS SHIPPING


This was the very first mod I did to my Toyota, but I now have to sell it because I am going flatbed. I had it professionally powdercoated gray before I installed it 5 years ago.

The bumper was used to protect the bed (which it did extremely well), although I never dropped down hard on this bumper; it is not bent or dented. All it has is lots of scratches from, well, being a bumper.

I never welded it on, so the bumper has not been modified in any way.

The bumper did go through 5 Wyoming winters, so it is a bit rusty. That is right, powdercoating doesn't even hold up here. Have no fear though, it is all surface rust that will clean up with a grinder. The rust does not affect the structure of the bumper.

With a grinder and some paint this bumper will look good as new. The same amount of work is put into a new bumper anyways, because they are shipped bare.























$250 PLUS SHIPPING


Local pickup or payment with money order plus shipping.

Reply to this thread or PM me with questions, offers, etc. I am looking for 12" Bilstein Shocks.

Thank you.

[KDXSR5]

Anybody? I am always looking for trades too let me know what you have!

[santa cruz crawler]

I have some stuff , I'm in Indiana,  also have some relatives in Jackson hole wy
I have some third members  I have some random parts
Let me know what you might be looking for ! Mabe some parts and some cash

[KDXSR5]

I have some stuff , I'm in Indiana,  also have some relatives in Jackson hole wy
I have some third members  I have some random parts
Let me know what you might be looking for ! Mabe some parts and some cash

I am looking for a couple 5.29 diffs, open is fine. I am also looking for slightly used 12 inch travel shocks, preferably Bilstein. I am also looking for a t-case mounted parking brake.

[santa cruz crawler]

I got some bilstein remote gas   Shocks    12" I'm pretty sure
But they have a little surface rust on the nickel plateing

Any way the work great ! No 529s.  And no drive line e brake!   

[KDXSR5]

I got some bilstein remote gas   Shocks    12" I'm pretty sure
But they have a little surface rust on the nickel plateing

Any way the work great ! No 529s.  And no drive line e brake!   

Throw up a picture and a part # so I can take a gander.

[Bobby Hunter]

how bout front and rear 400$ shipped

[KDXSR5]

how bout front and rear 400$ shipped

Nah, the front stays with me

[santa cruz crawler]

http://i1186.photobucket.com/albums/z366/brandon_birt/b5e9951a.jpg
Here's a picture , Before they got surface rust!

Got them from a buddy ? I know there's a part # just don't see it

[KDXSR5]

http://i1186.photobucket.com/albums/z366/brandon_birt/b5e9951a.jpg
Here's a picture , Before they got surface rust!

Got them from a buddy ? I know there's a part # just don't see it

They look a bit more used than what I was looking for, unfortunately.

[yota4runnernut]

I Want the bumper!
Shipping to 81435 business?
I also have a set of bilstein, I will get the part # and photos tomorrow. they were used for a very short time then I went air, been stored inside their whole life, no rust! can be reached at [email protected]

[yota4runnernut]

Let me know if you get a shipping price, or wanna met up and do some wheeling. I am in Colorado 81435. I nwill get a photo of the shocks while i am at the shop tomorrow.

[KDXSR5]

Let me know if you get a shipping price, or wanna met up and do some wheeling. I am in Colorado 81435. I nwill get a photo of the shocks while i am at the shop tomorrow.

Sorry for the lag, I have to wait until today to get a quote becuase I am shipping from a business. Please snap a pic of the shocks and get the part # today if you can. Thank you.

[yota4runnernut]

Damn! my shocks were the 10". I tried. don't have anything else on your list. but a lot of Toyota parts if you need something else. If not cash is king!

[JustDSM]

If you would be willing to take $275 and cover the shipping I'll paypal you as soon as you say "yes". I'm in Las Cruces, NM 88012.

For fastest reply, please email me at justdsm at hotmail dot com.

Justin

[KDXSR5]

The bumper is still available! Trades, deals etc. lets hear them!

[FREAKY BEHAVIOR]

Are these a lot more different than the ones for 79-83 trucks?

[KDXSR5]

Are these a lot more different than the ones for 79-83 trucks?

The same bumper is sold for 79-88 short bed trucks.

[JustDSM]

Still got this? I'd like to pick it up if you do.

[KDXSR5]

Yes, I do still have the bumper. I apologize for the late reply, again. We can work it through PM or e-mail, whatever is more convenient for you. Get back to me in your preferred method. Thank you.