Topic: Peugeot/Jeep/Toyota transmission question

[jenyus]

hey all, never posted here before but read a lot of tech here. im building an 86 samurai with a 2.3L Peugeot turbo diesel from a 1981 Peugeot 505. I was originally going to use the peugeot transmission and build an intermediate shaft to my samurai transfercase but decided to go a different route based on some information i found, in short, toyota transmission and dual cases. heres a link to my build thread as of now: http://zukikrawlers.com/showthread.php?t=41068

first let me explain how i got here and see if im missing anything.

1. my peugeot transmission is a BA 10/5, a transmission that went behind the 4.0L jeeps that didnt use the ax-15.

2.  (http://www.4x4wire.com/toyota/faq/parts/) i know that the ax-15 is very similar to the R151F and i need to know if there is any way to make a g54 or w56 tranny work in place of a ba 10/5 or if someone knows of a way to use a w56 or g54 to replace an ax-15 that would be helpful as well.

thanks for your help!

also posted at pirate http://pirate4x4.com/forum/showthread.php?p=13294477&posted=1#post13294477
and zukikrawlers http://zukikrawlers.com/showthread.php?t=43147

[2manytoys]

Maybe call Marlin's shop?

[jenyus [OP]]

no one ever answers or returns messages there, unfortunately

[OOPS]

no one ever answers or returns messages there, unfortunately

That's funny, I get through everytime I call.

[jenyus [OP]]

is this the right number? Local: (559) 25-CRAWL

[jenyus [OP]]

well i figured it out, 6cyl 5spd tranny with jeep ax-15 input shaft and bell housing

[2manytoys]

Glad you got it. Where did you get the info?

[jenyus [OP]]

talked to a buddy who knew his stuff, but now im having to get a bellhousing adapter designed and machined....