Author Topic: Newish (Read 1993 times)

smacaulay · « **on:** Jun 07, 2011, 10:23:42 PM »

Hi everyone,

Registered a while back, but haven't posted much. I've learned a lot from this site, specifically mass amounts of 3rz info

.

Been working on a 1st gen 4runner w/ a 3rz, links, and some other stuff...with a lot of help from a friend. Finally got it out on the street/trail and hope to make the round up.

Really appreciate all the info provided here and hope to contribute the little I've learned.

-Scott

Peterbuilt84 · « **Reply #1 on:** Jun 07, 2011, 10:51:50 PM »

toe · « **Reply #2 on:** Jun 07, 2011, 11:04:01 PM »

Rocksurfer · « **Reply #3 on:** Jun 08, 2011, 12:59:38 AM »

II

smacaulay · « **Reply #4 on:** Jun 08, 2011, 02:29:25 PM »

Just two more posts...then picture time

smacaulay · « **Reply #5 on:** Jun 08, 2011, 02:29:49 PM »

One more...then just need to figure the posting thing out.

smacaulay · « **Reply #6 on:** Jun 08, 2011, 02:32:45 PM »

prawl44 · « **Reply #7 on:** Jun 08, 2011, 05:41:28 PM »

dam thats sick

smacaulay · « **Reply #8 on:** Jun 08, 2011, 10:14:24 PM »

Thanks prawl, it's been a long build...and still has a long ways to go.

smacaulay · « **Reply #9 on:** Jun 08, 2011, 10:19:30 PM »

prawl44 · « **Reply #10 on:** Jun 08, 2011, 10:54:06 PM »

see i wanna do something like your f/bumper on my rear but have it hold a tire but i don wanna get rid of my tailgate do you got hids in your head lights ?

smacaulay · « **Reply #11 on:** Jun 08, 2011, 11:02:15 PM »

No HID's, but it does kinda look like it from that angle.

As for the rear bumper, are you talking about a stinger? If so, we are going to add one in the very near future...just don't want to completely kill the departure angle.

Peterbuilt84 · « **Reply #12 on:** Jun 08, 2011, 11:02:55 PM »

Any more specs/ pics of the runner, looks sweet

smacaulay · « **Reply #13 on:** Jun 08, 2011, 11:04:27 PM »

With a swing out or swing down you should be able to still retain use of your tailgate.

Check out the bumpers/cages forum on here...plenty of good ideas

prawl44 · « **Reply #14 on:** Jun 08, 2011, 11:05:37 PM »

i hear were your coming from dont want it to look like a boat ? an yea thinking or a swinging one so i still can get in an out of it

smacaulay · « **Reply #15 on:** Jun 08, 2011, 11:08:44 PM »

FJ80 front, 3rz, W56, stock duals, arbs, 40's, 14" FOA's

smacaulay · « **Reply #16 on:** Jun 08, 2011, 11:10:01 PM »

Thanks peterbuilt....so stoked to see it finally coming together

smacaulay · « **Reply #17 on:** Jun 08, 2011, 11:13:07 PM »

Flex shot....

smacaulay · « **Reply #18 on:** Jun 08, 2011, 11:13:51 PM »

Should have it mostly finished within about 2 weeks....I'll post some actual wheeling shots up then.

Peterbuilt84 · « **Reply #19 on:** Jun 08, 2011, 11:25:38 PM »

That is sick

3rz swaps are some of my favorite, especially on clean rigs

The fj80 front is sweet too.

Do you have a build or anything?

smacaulay · « **Reply #20 on:** Jun 09, 2011, 01:43:23 PM »

No build thread yet...still have a few things to finish first.

Bigmike made too good of an arguement for the 3rz not to pass up. I've only had this out once, but did suprisingly well on the freeway grades w/ 5.29's and a pretty heavy runner...but I'm already looking at cams

.

yoshaleng · « **Reply #21 on:** Jun 09, 2011, 11:42:53 PM »

93REDCRAWLER · « **Reply #22 on:** Jun 10, 2011, 09:36:42 PM »

smacaulay [OP]

smacaulay [OP]

smacaulay [OP]

smacaulay [OP]

smacaulay [OP]

smacaulay [OP]

smacaulay [OP]

smacaulay [OP]

smacaulay [OP]

smacaulay [OP]

smacaulay [OP]

smacaulay [OP]

Related Topics