Truggy build thing

Started by Lizard_lips, April 16, 2011, 05:24:11 PM

0 Members and 1 Guest are viewing this topic.

Lizard_lips

This has been sitting in my garage for years as I have been having knee surgeries. Now that I'm done with that I'm finally building it. It's pig's old toy. Still need to pressure wash the sand off of it. But most of it's on my garage floor now. 1 tons 350-TH350-Dana 300. Linked rear. those are the plans so far.



Dana 70 HD rear


The start of the front spring hangers until I link the front. Toy rears mixed with other springs.


Cut the floor and firewall out and moved the motor back about 11"



350-th350-Dana 300 Using a 700R4 to 208 adapter and a spud shaft.





Put some FOA's on the back to just sit at ride height. Lower links are 2" .250 wall square. Info provided by ErikB http://www.pirate4x4.com/forum/showpost.php?p=6529317&postcount=59
The statistic on sanity is that One in every four is insane, Think of your three best friends if they're ok then its you.

4RunnerChevy


bigarms23

cool build when its done are you going to keep this one
88 4runner 2016 5.3 auto atlas 2 on tons and tons of fun

Lizard_lips


Yeah I'll be keeping this one for a while
The statistic on sanity is that One in every four is insane, Think of your three best friends if they're ok then its you.

sirhc0306

 :popcorn:
Interested to see how the square link hold. Like the idea.
92 SAS truggy, Dana 44 Detroit 5.38's, 3 link with 14in Kings, Rear 9in Spool 5.42's, 3 link with 14in Kings, 22RE, SM465, 23 spline 2.28 and 4.70. 39.5 Iroks on OMF beadlocks. Warn 9000


Lizard_lips

go the front suspension almost all done. BTF Truss is all on. Upper and lower links. As well as my BTF arms.

Uppers and lowers





Front truss



Arms

The statistic on sanity is that One in every four is insane, Think of your three best friends if they're ok then its you.

yotaneck13

RNR FABRICATION ON THE EAST COAST!!! [email protected] (814)-516-5176 like us on facebook www.facebook.com/rnrfab
R.I.P Derek James Black 1995-2010 I miss you BUD! :sad2: 81 4wd wheelable 20r ifs rear welded on 33's goes amazing
"THE GENERAL" My build-on the backburner http://board.marlincrawler.com/index.php?topic=63519.0

Quote from: 86bobbedtoy on May 10, 2011, 08:42:59 PM
I make more money that you, my wife is hotter than yours, my thingy is bigger than yours

Lizard_lips

Change of plans. I cut the body out tonight and just going to cut the front tubes off and change it. I'll be putting toy skins back on eventually but I'm making it a little narrower.

The statistic on sanity is that One in every four is insane, Think of your three best friends if they're ok then its you.


sirhc0306

doesnt look like you have much room to work. Im thinking of doing the same thing to mine. Hell there isnt much of the cab left anyway
92 SAS truggy, Dana 44 Detroit 5.38's, 3 link with 14in Kings, Rear 9in Spool 5.42's, 3 link with 14in Kings, 22RE, SM465, 23 spline 2.28 and 4.70. 39.5 Iroks on OMF beadlocks. Warn 9000

Lizard_lips

Yeah it's tight but there's enough room. There wasn't much cab so I figured I'd make it easier to build off of
The statistic on sanity is that One in every four is insane, Think of your three best friends if they're ok then its you.

Ghost


Lizard_lips

Some updates. Cut the frame off from the motor mounts forward.


Frame capped and stuff


Welded the hoops on and mounted the shocks. 16" FOA's
The statistic on sanity is that One in every four is insane, Think of your three best friends if they're ok then its you.

Lizard_lips

Got a little bit done. Still need to put in my other a pillar bar in, side bracing, window bar, and more junk. I put my old toyota hood and grille on to see how it looked.


The statistic on sanity is that One in every four is insane, Think of your three best friends if they're ok then its you.

Lizard_lips

pulled it out of the garage yesterday. Made a mount for the fuel cell until I get a bigger cell.







The statistic on sanity is that One in every four is insane, Think of your three best friends if they're ok then its you.

Lizard_lips

haven't updated this in a long time. Got busy with other things but finally working on it again.
Screwed around with a few different hoods and then decided to go with my old toy skins. Narrowed 22" in the front.


The statistic on sanity is that One in every four is insane, Think of your three best friends if they're ok then its you.

Lizard_lips

Also taking the 70 out and putting a 14 bolt in. More pics to come



The statistic on sanity is that One in every four is insane, Think of your three best friends if they're ok then its you.

AaronB

why are you swapping out the 70?
"Never make your passion your occupation. it will loose it's luster and become work. that's why i never wanted to become a gynecologist!"

Quote from: skipnrocks on November 08, 2011, 05:36:37 PM
I also taught him how to put in 5min of hard work and then spend 15min staring and admiring what you have done...

Lizard_lips

picked up a 14 bolt super cheap with what I need in it. It's cheaper than doing what I want to with the 70.
The statistic on sanity is that One in every four is insane, Think of your three best friends if they're ok then its you.

Lizard_lips

a few updates. Got some cable shifters from JB fab. Great to deal with also.




Also started on the floor

The statistic on sanity is that One in every four is insane, Think of your three best friends if they're ok then its you.

Lizard_lips

A few more pics. working too many hours to get that much done.
floor



front without the fenders on.
The statistic on sanity is that One in every four is insane, Think of your three best friends if they're ok then its you.