Author Topic: Carb. Base plate 22r (Read 2794 times)

SamuelEngelking · « **on:** Jan 24, 2010, 09:41:36 PM »

Stock carb base for 22r..

BoG-ToY · « **Reply #1 on:** Jan 24, 2010, 11:34:38 PM »

got a complete intake manifold with carb.... make me an offer and show me what it is you need

SamuelEngelking · « **Reply #2 on:** Jan 25, 2010, 07:44:37 AM »

Its what the carb bolts to. Its the piece between the manifold and the carb. I really just need the butterfly valve in the inside but for ease i'd Buy that base plate..

Where are you located.?

BoG-ToY · « **Reply #3 on:** Jan 25, 2010, 09:02:30 AM »

im in northern california near redding to be exact

SamuelEngelking · « **Reply #4 on:** Jan 25, 2010, 12:28:10 PM »

This is the part i need here. Hows $50 and i'll take care of shipping. I'm In East Texas?

BoG-ToY · « **Reply #5 on:** Jan 25, 2010, 01:15:43 PM »

pm sent....

Can you explain to me whats wrong with yours so I can double check and Make sure there is absolutly NOTHING wrong with that peice on my carb? I havent run this carb so I know nothing about it

SamuelEngelking · « **Reply #6 on:** Jan 25, 2010, 03:46:55 PM »

Its Not a part known for going bad. i had a friend mess up the brass valves in the two intake holes. i'm running the got propane conversion set up and Carb Base Plate Mounts to the mixer on the propane. I'll Send you a picture. But its not hard at all to remove it from the carb, its just i have no use for the carb and you may be able to sell it to some one else.

Thats just another picture of the base plate removed and the Carb next to it.

And This is what i'll be putting on the top of it.

BoG-ToY · « **Reply #7 on:** Jan 25, 2010, 07:12:16 PM »

sounds good... looks like only three screws?

anyways... sending you another PM

Author Topic: Carb. Base plate 22r (Read 2794 times)

SamuelEngelking

Carb. Base plate 22r

BoG-ToY

Re: Carb. Base plate 22r

SamuelEngelking [OP]

Re: Carb. Base plate 22r

BoG-ToY

Re: Carb. Base plate 22r

SamuelEngelking [OP]

Re: Carb. Base plate 22r

BoG-ToY

Re: Carb. Base plate 22r

SamuelEngelking [OP]

Re: Carb. Base plate 22r

BoG-ToY

Re: Carb. Base plate 22r

Related Topics


	Author Topic: Carb. Base plate 22r (Read 2794 times) 0 Members and 1 Guest are viewing this topic. SamuelEngelking Trade Count: (0) Rock Master Turtle Points: -5 Posts: 253 Member since Jan '08 Carb. Base plate 22r « on: Jan 24, 2010, 09:41:36 PM » Stock carb base for 22r.. Report to moderator Logged 84 Toyota Ext, 5.29's Locked Up, 4.7's, 37's KM2, 17" KMC Wheels, Hydro assist, Propane, Headers, Body Armor, Some Bump In The Trunk.. BoG-ToY Trade Count: (0) The 2K Group Turtle Points: 594 Posts: 2,122 Member since Dec '05 Re: Carb. Base plate 22r « Reply #1 on: Jan 24, 2010, 11:34:38 PM » got a complete intake manifold with carb.... make me an offer and show me what it is you need Report to moderator Logged Sand, what fun, drop pressure to 12psi, stock tires are still digging, can't afford to get stuck, 8psi, still not working. Find a place to GET OUT, air up, un-lock hubs, WAIT whats this, hubs are UN-LOCKED already. 2wd, 8psi, stock tires, Oregon sand dunes. SamuelEngelking [OP] Trade Count: (0) Rock Master Turtle Points: -5 Posts: 253 Member since Jan '08 Re: Carb. Base plate 22r « Reply #2 on: Jan 25, 2010, 07:44:37 AM » Its what the carb bolts to. Its the piece between the manifold and the carb. I really just need the butterfly valve in the inside but for ease i'd Buy that base plate.. Where are you located.? Report to moderator Logged 84 Toyota Ext, 5.29's Locked Up, 4.7's, 37's KM2, 17" KMC Wheels, Hydro assist, Propane, Headers, Body Armor, Some Bump In The Trunk.. BoG-ToY Trade Count: (0) The 2K Group Turtle Points: 594 Posts: 2,122 Member since Dec '05 Re: Carb. Base plate 22r « Reply #3 on: Jan 25, 2010, 09:02:30 AM » im in northern california near redding to be exact Report to moderator Logged Sand, what fun, drop pressure to 12psi, stock tires are still digging, can't afford to get stuck, 8psi, still not working. Find a place to GET OUT, air up, un-lock hubs, WAIT whats this, hubs are UN-LOCKED already. 2wd, 8psi, stock tires, Oregon sand dunes. SamuelEngelking [OP] Trade Count: (0) Rock Master Turtle Points: -5 Posts: 253 Member since Jan '08 Re: Carb. Base plate 22r « Reply #4 on: Jan 25, 2010, 12:28:10 PM » This is the part i need here. Hows $50 and i'll take care of shipping. I'm In East Texas? Report to moderator Logged 84 Toyota Ext, 5.29's Locked Up, 4.7's, 37's KM2, 17" KMC Wheels, Hydro assist, Propane, Headers, Body Armor, Some Bump In The Trunk.. BoG-ToY Trade Count: (0) The 2K Group Turtle Points: 594 Posts: 2,122 Member since Dec '05 Re: Carb. Base plate 22r « Reply #5 on: Jan 25, 2010, 01:15:43 PM » pm sent.... Can you explain to me whats wrong with yours so I can double check and Make sure there is absolutly NOTHING wrong with that peice on my carb? I havent run this carb so I know nothing about it Report to moderator Logged Sand, what fun, drop pressure to 12psi, stock tires are still digging, can't afford to get stuck, 8psi, still not working. Find a place to GET OUT, air up, un-lock hubs, WAIT whats this, hubs are UN-LOCKED already. 2wd, 8psi, stock tires, Oregon sand dunes. SamuelEngelking [OP] Trade Count: (0) Rock Master Turtle Points: -5 Posts: 253 Member since Jan '08 Re: Carb. Base plate 22r « Reply #6 on: Jan 25, 2010, 03:46:55 PM » Its Not a part known for going bad. i had a friend mess up the brass valves in the two intake holes. i'm running the got propane conversion set up and Carb Base Plate Mounts to the mixer on the propane. I'll Send you a picture. But its not hard at all to remove it from the carb, its just i have no use for the carb and you may be able to sell it to some one else. Thats just another picture of the base plate removed and the Carb next to it. And This is what i'll be putting on the top of it. Report to moderator Logged 84 Toyota Ext, 5.29's Locked Up, 4.7's, 37's KM2, 17" KMC Wheels, Hydro assist, Propane, Headers, Body Armor, Some Bump In The Trunk.. BoG-ToY Trade Count: (0) The 2K Group Turtle Points: 594 Posts: 2,122 Member since Dec '05 Re: Carb. Base plate 22r « Reply #7 on: Jan 25, 2010, 07:12:16 PM » sounds good... looks like only three screws? anyways... sending you another PM Report to moderator Logged Sand, what fun, drop pressure to 12psi, stock tires are still digging, can't afford to get stuck, 8psi, still not working. Find a place to GET OUT, air up, un-lock hubs, WAIT whats this, hubs are UN-LOCKED already. 2wd, 8psi, stock tires, Oregon sand dunes.