Rig Dimensions thread

[Volcom]

1984 4Runner
Trail Gear 4" springs F&R
Close to 5" of total lift
Old school All-Pro crossmember
109" wheelbase

Extra weight on the truck
Full cage, front bumper, hard top

35" Generic All terrains
33 15/16" tall at 30 psi
26" frame height
belly height
11" rear diff clearance
11 3/8" front diff clearance
3815 lbs (1/4 tank of fuel, hardtop)



39.5" Iroks
I'll measure it up when I swap the big tires back on.

[wakkjobb]

...no weight?

[Volcom]

...no weight?

I'll add it when I get it weighed.  I've never gotten a chance to weigh my 4Runner.  I'm guessing 4200 lbs.

[COToy91]

1991 Pickup
Allpro 3" springs F&R
Around 6" of lift with the body lift for the motor
Bud-built crossmember
105" wheelbase

Extra weight on the truck
Full cage, flat bed, spare tire, tools, parts

37" MTR's
~36" tall at 35 psi
?" frame height
?" belly height
?" rear diff clearance
?" front diff clearance
? lbs

I'll fill in all the rest when i get the chance

[wakkjobb]

Now that I finally have one...      

84 regular cab short bed
Shocks: leaky Rough Country somethings, 30" at full droop
Springs: I was told Marlin but...
--part #s 15473, 15475 fronts and 16275 rear (rears for sale)
Edit: ProComp springs, 6" lift... currently getting Chevies
Wheelbase: 105 (want to stretch it a bit)
Tires: worn 37" MTRs, @ 34" at 10 psi
Frame: 29 at front, 25 1/2 in center and 34 1/2 out back
Diffs: front 12, rear 11
Trans X-member: 20
Stinger: 54
Driver: 74 on hind legs

Other:
home made flat bed (not mine)
home made sliders (got Addicted's; need to install)
4-point RJS harnesses
vanilla air freshener
rusty floors (Not anymore!!)
rusty frame...

All numbers based on 10 psi tire pressure.
>>Dan

[Okiyota]

How about adding a pic to your post so everyone can see what those specs look like?

[wakkjobb]

ha ha ha, I have a red shaft...

Nice pic Ryan!

>>Dan

[COToy91]

ha ha ha, I have a red shaft...

Nice pic Ryan!

>>Dan

My old Driveshaft was painted pink lol

[Jakesteads]

i just measured my truck is 24" to the bottom of the frame with my 37s at 30PSI

[coloradocrawler]

1987 4runner
Front 5in Alcan and TG 5in shackles
Rear (dont laugh, my truck acted real weird during the build process) 9in Alcan springs reworked and "lowered" to a soggy 7in and TG 5in
                        shackles - All in all about 6inches of lift
39in Irocks- actual height around 37in
Frame: 28in at mid body mount with 3lbs in the tires
Xmemeber/belly:23 1/4
Truck height: 81
Diffs: FR 11in  RR 12- at crawling pressure in tires (3lbs)
Wheelbase: ?
Weight: ?

[Russell_G]

87 toyota dlx longbed. Cropped a foot.
37'' mtr's 35psi
Front diff 12''
rear diff with shaved drain plug 13''
frame height 29'' center
Wheelbase 114''
4inch TG springs front
5inch rears
Added weight...Duals and over 150 feet of Fatmat and a gallon or 2 of spray on noise killer. Sub box X2 amp rack and big door pods.

Adding tube work on the rear and a false floor to the bed so that will get it lower and add more weight.

Also my truck is empty. No tools or spare in it right now. Rear springs still not broken in yet.