Topic: taco needs some help(gathering parts, FINALLY got my axle)

[twistedtoy92]

damn IFS.......

[Broke_Okie_Ty [OP]]

Holy crap man, thats pretty scary. Get that axle under there before something else like that happens.

ya that skid is 200+ ft long. i was more annoyed at the fact that it was $70 to tow. $40 for the lower BJ and it toasted my 35 mtr.

[Broke_Okie_Ty [OP]]

got started and it turns out, i need some new tools. i was finally victorious over the tie rod and J arm, but i lost a few good men in the battle.....

[twistedtoy92]

Snap-on can fix that problem!

[Broke_Okie_Ty [OP]]

Snap-on can fix that problem!

 if i had the $$ id go buy "the wall" fully loaded  but i dont, so my stuff is more of the harbor freight flavor

[yotatough]

Little bit of heat helps alot with those peskey nuts!!

[Broke_Okie_Ty [OP]]

unfortunately i didnt have a torch set to heat it up with. i finally got it tore down to the spindle, but that wont come off now. i soaked it in pentro 90 but....
 

[twistedtoy92]

i hear you there... I got a lot of my snap on crap 50-55% off through the college.... Maxed my credit out with them!!!

[Broke_Okie_Ty [OP]]

Sooo..... it's been a long time and a lot of miles since I started this thread....

after a disastrous ending to 2013 I finally gave up on the dreams of building my extra cab taco.....

[Broke_Okie_Ty [OP]]

I now have a NEW dream of building this!

Specs:
2001 DC trd, 3.4/auto, w/elocker, 2.5ish" lift and some body damage

The plan is still the same but the rig will be more of a expo/hunter style than hard core wheeler.