Author Topic: ANGLE IRON pieces,metal,scraps FRESNO (Read 974 times)

86rustbucket · « **on:** Aug 12, 2009, 07:33:47 PM »

i just need a couple pieces of metal to make some spring hangers and shock mounts and i dont want to buy 10 feet of each from valley iron.
i need
40" inches of 2.5 inch angle iron or 3" preferablly 3/16 or thicker
1 FOOT of 3.5x 3.5 square tube 3/16 or 1/4
im in fresno ca please let me know what u got.......im not picky rust is cool

Rocksnail · « **Reply #1 on:** Aug 13, 2009, 05:50:36 PM »

you can always go to a local welding shop. Or even look at valley irons scrap pile.

Author Topic: ANGLE IRON pieces,metal,scraps FRESNO (Read 974 times)

86rustbucket

ANGLE IRON pieces,metal,scraps FRESNO

Rocksnail

Re: ANGLE IRON pieces,metal,scraps FRESNO

Related Topics


	Author Topic: ANGLE IRON pieces,metal,scraps FRESNO (Read 974 times) 0 Members and 1 Guest are viewing this topic. 86rustbucket Trade Count: (+4) The 1K Club Turtle Points: 45 Posts: 1,328 Member since Jun '09 ANGLE IRON pieces,metal,scraps FRESNO « on: Aug 12, 2009, 07:33:47 PM » i just need a couple pieces of metal to make some spring hangers and shock mounts and i dont want to buy 10 feet of each from valley iron. i need 40" inches of 2.5 inch angle iron or 3" preferablly 3/16 or thicker 1 FOOT of 3.5x 3.5 square tube 3/16 or 1/4 im in fresno ca please let me know what u got.......im not picky rust is cool Report to moderator Logged Rocksnail Trade Count: (0) Crawler Guru Turtle Points: 3 Posts: 595 Member since Jun '07 Re: ANGLE IRON pieces,metal,scraps FRESNO « Reply #1 on: Aug 13, 2009, 05:50:36 PM » you can always go to a local welding shop. Or even look at valley irons scrap pile. Report to moderator Logged 1993 4door s10 Tahoe. 4.3 th350c duel toys w/4.7 rear, D60 front 5.13 welded. 14Bolt rear 5.13 mini spool,hydro assist, TG 5HD front springs, 63s out back. h2s with 39x14 17 Pit Bull Madd Dogs