Money bucket ZUK

Started by TEXCRAWLER, July 19, 2009, 07:53:11 AM

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1 2 3 4
User actions

TEXCRAWLER

July 19, 2009, 07:53:11 AM Last Edit: June 19, 2010, 05:53:46 AM by TEXCRAWLER




http://www.zukikrawlers.com/showthread.php?t=12432


I got my 39's today.  39x15x15 TSL Super Swampers







4 linkin F&R. Coils F&R. Gona be bad ass. I'm using a Tacoma rear axle cause it has 4" more width than the Toy 89 IFS axle I have now. I have enough jony joints to get the rear done and all my brackets and still waiting on alot of parts.









Toy 8" 3rd on the left and the Tacoma 3rd on the right. They look just about the same in size but there is a inch difference and no parts are interchangeable. I'm still gona be doing 5.29's R&P but gona be spooled F&R.



Here she is back on the chopping block again. I'd say a month at the most and I'll have my suspension complete and ready for a test run.



Got my coils and coil hangers. I have alot more coming from Sky Manufacturing
87' Samurai, Dimond-F, Tacoma-R, 5.29 F-detroit R-spool,6 Stud knukles, 4-link coils F&R, Duel Marlin chromoly 4.7 Toyota T-Case, 39.5 TSL's, 8000 lb winch, 6 piont cage, Full Hydro, Sidekick 1.6 16V, Thourly header, LongField 30 splines, 115" WB, crawlin @ 459:1

I could care less for turtle points.

TEXCRAWLER

#1
July 19, 2009, 07:54:15 AM
I now have the DOM tubing and ready to make my links


Out rigger and hiem hangers built ready to weld on.



More goodies such as shock hoops, disk brake kit, and the conversion kit to use Toy IFS hub bodies and locks on my 85 toy axle


Ready to plate the frame and weld on the coil hangers
87' Samurai, Dimond-F, Tacoma-R, 5.29 F-detroit R-spool,6 Stud knukles, 4-link coils F&R, Duel Marlin chromoly 4.7 Toyota T-Case, 39.5 TSL's, 8000 lb winch, 6 piont cage, Full Hydro, Sidekick 1.6 16V, Thourly header, LongField 30 splines, 115" WB, crawlin @ 459:1

I could care less for turtle points.

TEXCRAWLER

#2
July 19, 2009, 07:56:03 AM
Got a bit of work done on the rig. D-line built.


OK boys & girls I've been holding out on yall. I'm putting a Dimond front axle in the front. Built out of 3/8" steel.



I have my pinion angle set now and I can weld the rest of my hangers on. Coils are in and gona set my coils on the axle after I get my links built to center my axle.







Lower links are built
87' Samurai, Dimond-F, Tacoma-R, 5.29 F-detroit R-spool,6 Stud knukles, 4-link coils F&R, Duel Marlin chromoly 4.7 Toyota T-Case, 39.5 TSL's, 8000 lb winch, 6 piont cage, Full Hydro, Sidekick 1.6 16V, Thourly header, LongField 30 splines, 115" WB, crawlin @ 459:1

I could care less for turtle points.

TEXCRAWLER

#3
July 19, 2009, 07:57:40 AM
This is the fuel cell that I bought from Simmit racing.



Built my new fromt hanger for my winch, P/S box and coil mounts



Sidekick P/S box taped for hydro assist. I went w/the kick box cuase it mounts up high inside the frame sence it will be so far out in front.


PSC P/S pump

87' Samurai, Dimond-F, Tacoma-R, 5.29 F-detroit R-spool,6 Stud knukles, 4-link coils F&R, Duel Marlin chromoly 4.7 Toyota T-Case, 39.5 TSL's, 8000 lb winch, 6 piont cage, Full Hydro, Sidekick 1.6 16V, Thourly header, LongField 30 splines, 115" WB, crawlin @ 459:1

I could care less for turtle points.

TEXCRAWLER

#4
July 19, 2009, 07:59:01 AM
I'm mostly finished but got alot of cosmedic work to do.

Front hanger  Gona have a 100% aproch angle F&R



Ho does this look to yall



Getting ready to tube the rear






This is where the box mounts inside the the hole I cut in the front hanger



links     115"  Wheelbase



Upper links built for the diamond from Hendrix Motor sports



Got somethin in the works from Desert Runner yall really gona like
87' Samurai, Dimond-F, Tacoma-R, 5.29 F-detroit R-spool,6 Stud knukles, 4-link coils F&R, Duel Marlin chromoly 4.7 Toyota T-Case, 39.5 TSL's, 8000 lb winch, 6 piont cage, Full Hydro, Sidekick 1.6 16V, Thourly header, LongField 30 splines, 115" WB, crawlin @ 459:1

I could care less for turtle points.

toyotanner

#5
July 19, 2009, 11:55:31 AM
is there a reason your going coils? or do you just not have the money for airshocks/ coilovers?

TEXCRAWLER

#6
July 19, 2009, 12:42:05 PM
I wanted coils in the 1st place and yes they are less expensive. Don't see to many broken coils but have seen a few broken airshocks and seen them lose the pressure out on the trail.
87' Samurai, Dimond-F, Tacoma-R, 5.29 F-detroit R-spool,6 Stud knukles, 4-link coils F&R, Duel Marlin chromoly 4.7 Toyota T-Case, 39.5 TSL's, 8000 lb winch, 6 piont cage, Full Hydro, Sidekick 1.6 16V, Thourly header, LongField 30 splines, 115" WB, crawlin @ 459:1

I could care less for turtle points.

thegoofster21

#7
July 19, 2009, 01:01:53 PM
your sami is so nice. i hope to get mine done soon
Quote from: crawlerdad on October 08, 2009, 08:21:17 PM
Any guy who takes his woman wheeling enjoys her. A woman who is owned is left at home to cook, clean, and keep beer cold. So if this offends you you should stop looking and go have some tacos.    :rofl2: And a beer. If your old enough.   :beerchug:   :beer:

04 Tacoma 33s http://board.marlincrawler.com/index.php?topic=61454.0
jmoffroad.com

TEXCRAWLER

#8
July 19, 2009, 02:28:34 PM
THANX
87' Samurai, Dimond-F, Tacoma-R, 5.29 F-detroit R-spool,6 Stud knukles, 4-link coils F&R, Duel Marlin chromoly 4.7 Toyota T-Case, 39.5 TSL's, 8000 lb winch, 6 piont cage, Full Hydro, Sidekick 1.6 16V, Thourly header, LongField 30 splines, 115" WB, crawlin @ 459:1

I could care less for turtle points.

Slolyfe

#9
July 19, 2009, 05:42:24 PM
Looks awesome! I love the axles.

Not trying to tell you how to operate but be careful with those concrete blocks holding your rig up! Ive had one explode on me and dropped a tcase and tranny. Luckily I had them ratchet strapped also so they only moved afew inches.
You'll never take me alive

85yotabox

#10
July 20, 2009, 09:05:04 PM
lookin good man, cant wait to see this thing roaming the streets of Napa again.
Chicks dig body damage! 
build it to beat it!
_____________________
[  ]===TOYOTA===[  ]
my build:  http://board.marlincrawler.com/index.php?topic=51558.0

TEXCRAWLER

#11
July 21, 2009, 05:59:08 PM
Quote from: 85yotabox on July 20, 2009, 09:05:04 PM
lookin good man, cant wait to see this thing roaming the streets of Napa again.

Don't no how much street drivin this thing will have anymore.  Between my zul and my truck the cops no who I am now!!  LOL   Tell them to sit on this  :thumbs:   and rotate!!
87' Samurai, Dimond-F, Tacoma-R, 5.29 F-detroit R-spool,6 Stud knukles, 4-link coils F&R, Duel Marlin chromoly 4.7 Toyota T-Case, 39.5 TSL's, 8000 lb winch, 6 piont cage, Full Hydro, Sidekick 1.6 16V, Thourly header, LongField 30 splines, 115" WB, crawlin @ 459:1

I could care less for turtle points.

TEXCRAWLER

#12
July 23, 2009, 08:08:07 PM
Here is the front tube clip I had Jack at Desert Runner Fab fab and bend up for me. I'll get it put on this weekend.



Getting my rear axles ready for my disk brakes




This is the bracket I got from Skymanurfacturing for the disk brake convertion.
87' Samurai, Dimond-F, Tacoma-R, 5.29 F-detroit R-spool,6 Stud knukles, 4-link coils F&R, Duel Marlin chromoly 4.7 Toyota T-Case, 39.5 TSL's, 8000 lb winch, 6 piont cage, Full Hydro, Sidekick 1.6 16V, Thourly header, LongField 30 splines, 115" WB, crawlin @ 459:1

I could care less for turtle points.

rockwalker

#13
July 29, 2009, 10:16:34 PM
i should be getting my diamond this friday i hope its been a long time.  what width are you? 
85 runner with 3RZ  linked  locked  and ready  2rock
http://board.marlincrawler.com/index.php?topic=40729.0

87 tintop..........................................................

TEXCRAWLER

#14
July 30, 2009, 04:16:58 PM
Quote from: rockwalker on July 29, 2009, 10:16:34 PM
i should be getting my diamond this friday i hope its been a long time.  what width are you? 

You can't go wrong w/the diamond axle.
Stock Toy width w/the sky IFS Hub convertion and the 39's it is 66"
87' Samurai, Dimond-F, Tacoma-R, 5.29 F-detroit R-spool,6 Stud knukles, 4-link coils F&R, Duel Marlin chromoly 4.7 Toyota T-Case, 39.5 TSL's, 8000 lb winch, 6 piont cage, Full Hydro, Sidekick 1.6 16V, Thourly header, LongField 30 splines, 115" WB, crawlin @ 459:1

I could care less for turtle points.

luvyota

#15
July 30, 2009, 05:50:28 PM
looks good its alot better than my buddys sami
luvyota

twistedtoy92

#16
July 30, 2009, 06:53:43 PM
damn nice build :beerchug: I'll be watchin this one.... :yupyup:
2005 Audi A4 2.0T Quattro 380 AWHP @ 24psi
1993 Toyota Pickup http://board.marlincrawler.com/index.php?topic=72886.msg866982#msg866982
1992 Toyota Pickup http://board.marlincrawler.com/index.php?topic=49319.msg616251#msg616251
1985 4runner http://board.marlincrawler.com/index.php?topic=60737.msg745263#msg745263

"TRIPLE CASES GETS YOU LAID." -BigMike

"I daily drive this thang everyday." (swapped89)

TEXCRAWLER

#17
August 03, 2009, 10:38:53 AM
Front end is complete and still workin on the front tube clip. Gone do it 2 night.



Rear is complete




I like the way HACK did his front 4 link so I monted my upper link brackets on the outside of the frame.




I aslo bought the rear tube cap from Trail Tough
87' Samurai, Dimond-F, Tacoma-R, 5.29 F-detroit R-spool,6 Stud knukles, 4-link coils F&R, Duel Marlin chromoly 4.7 Toyota T-Case, 39.5 TSL's, 8000 lb winch, 6 piont cage, Full Hydro, Sidekick 1.6 16V, Thourly header, LongField 30 splines, 115" WB, crawlin @ 459:1

I could care less for turtle points.

twistedtoy92

#18
August 03, 2009, 07:47:09 PM
Lookin real nice :yupyup:
2005 Audi A4 2.0T Quattro 380 AWHP @ 24psi
1993 Toyota Pickup http://board.marlincrawler.com/index.php?topic=72886.msg866982#msg866982
1992 Toyota Pickup http://board.marlincrawler.com/index.php?topic=49319.msg616251#msg616251
1985 4runner http://board.marlincrawler.com/index.php?topic=60737.msg745263#msg745263

"TRIPLE CASES GETS YOU LAID." -BigMike

"I daily drive this thang everyday." (swapped89)

thegoofster21

#19
August 03, 2009, 09:37:46 PM
i love how it looks
Quote from: crawlerdad on October 08, 2009, 08:21:17 PM
Any guy who takes his woman wheeling enjoys her. A woman who is owned is left at home to cook, clean, and keep beer cold. So if this offends you you should stop looking and go have some tacos.    :rofl2: And a beer. If your old enough.   :beerchug:   :beer:

04 Tacoma 33s http://board.marlincrawler.com/index.php?topic=61454.0
jmoffroad.com

Jud

#20
August 04, 2009, 01:15:42 PM
Damn I soo want to build a sammi just like that! Looks badass!!!!!!
One Ton Single Cab  - http://board.marlincrawler.com/index.php?topic=48229

"bout tree fiddy"

TEXCRAWLER

#21
August 05, 2009, 06:01:27 AM
I may have run into a problem w/the steering box and might have to go full hydro
87' Samurai, Dimond-F, Tacoma-R, 5.29 F-detroit R-spool,6 Stud knukles, 4-link coils F&R, Duel Marlin chromoly 4.7 Toyota T-Case, 39.5 TSL's, 8000 lb winch, 6 piont cage, Full Hydro, Sidekick 1.6 16V, Thourly header, LongField 30 splines, 115" WB, crawlin @ 459:1

I could care less for turtle points.

TEXCRAWLER

#22
August 07, 2009, 09:49:06 PM
Sky- manufacturing IFS hub conversion kit. Also 1-1/2" wider






Pulled her out of the grage and maxed out mt 60" hi lift w/alot more to go













Workin on puttin that front tube clip together

87' Samurai, Dimond-F, Tacoma-R, 5.29 F-detroit R-spool,6 Stud knukles, 4-link coils F&R, Duel Marlin chromoly 4.7 Toyota T-Case, 39.5 TSL's, 8000 lb winch, 6 piont cage, Full Hydro, Sidekick 1.6 16V, Thourly header, LongField 30 splines, 115" WB, crawlin @ 459:1

I could care less for turtle points.

thegoofster21

#23
August 08, 2009, 11:37:19 AM
aww its so cute haha
Quote from: crawlerdad on October 08, 2009, 08:21:17 PM
Any guy who takes his woman wheeling enjoys her. A woman who is owned is left at home to cook, clean, and keep beer cold. So if this offends you you should stop looking and go have some tacos.    :rofl2: And a beer. If your old enough.   :beerchug:   :beer:

04 Tacoma 33s http://board.marlincrawler.com/index.php?topic=61454.0
jmoffroad.com

TEXCRAWLER

#24
August 08, 2009, 05:50:43 PM
Quote from: thegoofster21 on August 08, 2009, 11:37:19 AM
aww its so cute haha

Yeh I can't get it out of the grage with the 39's on it.
87' Samurai, Dimond-F, Tacoma-R, 5.29 F-detroit R-spool,6 Stud knukles, 4-link coils F&R, Duel Marlin chromoly 4.7 Toyota T-Case, 39.5 TSL's, 8000 lb winch, 6 piont cage, Full Hydro, Sidekick 1.6 16V, Thourly header, LongField 30 splines, 115" WB, crawlin @ 459:1

I could care less for turtle points.

thegoofster21

#25
August 09, 2009, 10:16:42 AM
ya i had 26" tires on mine for a little on its got 31" and looks a little better
Quote from: crawlerdad on October 08, 2009, 08:21:17 PM
Any guy who takes his woman wheeling enjoys her. A woman who is owned is left at home to cook, clean, and keep beer cold. So if this offends you you should stop looking and go have some tacos.    :rofl2: And a beer. If your old enough.   :beerchug:   :beer:

04 Tacoma 33s http://board.marlincrawler.com/index.php?topic=61454.0
jmoffroad.com

luvyota

#26
August 11, 2009, 09:48:54 AM
that looks sweet man :clap: do you know how much total travel you have?
luvyota

thegoofster21

#27
August 12, 2009, 08:25:38 PM
Quote from: TEXCRAWLER on August 05, 2009, 06:01:27 AM
I may have run into a problem w/the steering box and might have to go full hydro

oh darn haha
Quote from: crawlerdad on October 08, 2009, 08:21:17 PM
Any guy who takes his woman wheeling enjoys her. A woman who is owned is left at home to cook, clean, and keep beer cold. So if this offends you you should stop looking and go have some tacos.    :rofl2: And a beer. If your old enough.   :beerchug:   :beer:

04 Tacoma 33s http://board.marlincrawler.com/index.php?topic=61454.0
jmoffroad.com

TEXCRAWLER

#28
August 14, 2009, 07:28:40 AM
Quote from: luvyota on August 11, 2009, 09:48:54 AM
that looks sweet man :clap: do you know how much total travel you have?

Not yet but will let you know soon and I get some pics of it with the meats on it. I now have all my hydro set up. I'm just shy $1000 into it. I'll have pics soon
87' Samurai, Dimond-F, Tacoma-R, 5.29 F-detroit R-spool,6 Stud knukles, 4-link coils F&R, Duel Marlin chromoly 4.7 Toyota T-Case, 39.5 TSL's, 8000 lb winch, 6 piont cage, Full Hydro, Sidekick 1.6 16V, Thourly header, LongField 30 splines, 115" WB, crawlin @ 459:1

I could care less for turtle points.

TEXCRAWLER

#29
August 18, 2009, 07:38:28 PM
My full hydro setup from Trail Gear









Disk brake set up for the rear. I bought the bracket from Sky Manufacturing and the calipers & rotors are Cadilac Eldorado fronts



87' Samurai, Dimond-F, Tacoma-R, 5.29 F-detroit R-spool,6 Stud knukles, 4-link coils F&R, Duel Marlin chromoly 4.7 Toyota T-Case, 39.5 TSL's, 8000 lb winch, 6 piont cage, Full Hydro, Sidekick 1.6 16V, Thourly header, LongField 30 splines, 115" WB, crawlin @ 459:1

I could care less for turtle points.
Print
Go Up Pages1 2 3 4
User actions