Author Topic: Marlin Crawler 4.7 t-case - SOME SAS STUFF STILL (Read 7205 times)

kneedownnate · « **on:** Jul 11, 2009, 02:36:14 PM »

LOCATED IN REDDING, CA Cash in hand or paypal

I hate to do it, but if I think about it too much I won't go through with it. Forward shift 21 spline. Case is stamped with the build info and IIRC the registration number. Mileage unknown, but it all rolls smooth and is pretty clean.

New one is $775, I figure ~~$500~~ $450 will save somebody a fair chunk of change! Shipping looks to be $60-100 or so, so I'll try and work with the buyer on the shipping costs.

I still have some of a MARLIN SAS kit.
Still have:
~~FRONT SPRING HANGER W/BOLTS AND BUSHINGS~~ - SOLD
~~VENTED ROTORS (NAPA PREMIUM I BELIEVE)~~ - SOLD
STEERING STABILIZER KIT

kneedownnate · « **Reply #1 on:** Jul 16, 2009, 01:14:39 AM »

Bump for more stuff added to the first post again

Quote from: jrock on Jul 16, 2009, 12:53:20 AM

Interested in the histeer if Rockman passes.

He's not that interested

yotatough · « **Reply #2 on:** Jul 17, 2009, 04:18:16 PM »

SHOCK HOOPS W/SUPPORTS
U-BOLT FLIP KIT
SKY IFS BOX MOUNT KIT
FRONT SPRING HANGER W/BOLTS AND BUSHINGS

how much for all of this shipped to fresno 93722?

4Runtoy · « **Reply #3 on:** Jul 17, 2009, 05:40:18 PM »

Interested on
HIGH STEER KIT....if rockman and jrock passes
U-BOLT FLIP KIT
FRONT SPRING HANGER W/BOLTS AND BUSHINGS
VENTED ROTORS (NAPA PREMIUM I BELIEVE).....are these bigger than stock like the ones Marlin sells?
REAR SPRING HANGERS JIGS W/TUBES
I know I have second bid in some of the parts, how much for all these and ship to a business at 91311?.

kneedownnate · « **Reply #4 on:** Jul 17, 2009, 07:22:12 PM »

Quote from: yotatough on Jul 17, 2009, 04:18:16 PM

SHOCK HOOPS W/SUPPORTS
U-BOLT FLIP KIT
SKY IFS BOX MOUNT KIT
FRONT SPRING HANGER W/BOLTS AND BUSHINGS

how much for all of this shipped to fresno 93722?

Business or residential? Either way, I figure $220 should cover it. The front hanger is going to put it over the edge since it'll require a bigger box.

kneedownnate · « **Reply #5 on:** Jul 17, 2009, 07:33:37 PM »

Quote from: 4Runtoy on Jul 17, 2009, 05:40:18 PM

Interested on
HIGH STEER KIT....if rockman and jrock passes
U-BOLT FLIP KIT
FRONT SPRING HANGER W/BOLTS AND BUSHINGS
VENTED ROTORS (NAPA PREMIUM I BELIEVE).....are these bigger than stock like the ones Marlin sells?
REAR SPRING HANGERS JIGS W/TUBES
I know I have second bid in some of the parts, how much for all these and ship to a business at 91311?.

I'm contacting jrock right now to see where he stands. Also, you said rear springs hangers, so I just wanted to make sure you knew they were for setting up the rear shackle mount for the front springs? Rotors are the fj60/62 rotors used to convert solid axle to vented rotors, so I guess the answer is yes. Shipping will be a bit high since the high steer will take a big box, unless I can send it usps and just wrap it with bubble wrap and tape.

toyotamobing · « **Reply #6 on:** Jul 18, 2009, 08:01:06 PM »

shipping on the tcase to 93401 business

kneedownnate · « **Reply #7 on:** Jul 18, 2009, 10:43:47 PM »

Looks like shipping would be $50.

4Runtoy · « **Reply #8 on:** Jul 20, 2009, 08:59:24 AM »

kneedownnate · « **Reply #9 on:** Jul 21, 2009, 11:09:29 PM »

Everything but t-case is still available. I'm keeping it till I find out if I get approved for unemployment the 27th, then I have somebody interested in it.

kneedownnate · « **Reply #10 on:** Jul 23, 2009, 07:20:10 AM »

Bump!

kneedownnate · « **Reply #11 on:** Jul 24, 2009, 02:37:34 PM »

Top! Looks like I've gained employment for the time being, so I'll be keeping the case for the time being.

kneedownnate · « **Reply #12 on:** Jul 27, 2009, 10:59:06 AM »

kneedownnate · « **Reply #13 on:** Jul 28, 2009, 08:45:15 AM »

Bump!

kneedownnate · « **Reply #14 on:** Jul 29, 2009, 08:24:20 AM »

jrock · « **Reply #15 on:** Jul 29, 2009, 02:17:51 PM »

Histeer sold.

kneedownnate · « **Reply #16 on:** Jul 29, 2009, 09:59:04 PM »

Sounds like a plan

BLACKDOG · « **Reply #17 on:** Jul 29, 2009, 11:43:38 PM »

still got the shock hoops Nate?

kneedownnate · « **Reply #18 on:** Jul 30, 2009, 10:32:54 AM »

Yup

BLACKDOG · « **Reply #19 on:** Jul 30, 2009, 11:32:12 PM »

wanna do the shipping to 89508 for me?

kneedownnate · « **Reply #20 on:** Jul 31, 2009, 07:29:33 AM »

Looks like about $12, so how bout $70 shipped?

REG535 · « **Reply #21 on:** Jul 31, 2009, 08:03:54 AM »

how much for sky's ifs mount?

kneedownnate · « **Reply #22 on:** Jul 31, 2009, 08:48:34 AM »

How bout $20 sipped? It's not a kit with the side plates like Marlin's, just the bolts, tubes, and 2 smaller plates that weld on top of the frame for the top tube.

BLACKDOG · « **Reply #23 on:** Jul 31, 2009, 09:47:48 AM »

done deal. I'll hit you up this weekend to work out the details

kneedownnate · « **Reply #24 on:** Jul 31, 2009, 02:06:55 PM »

No problem, I'll pm you the email address to send payment to

86rustbucket · « **Reply #25 on:** Aug 01, 2009, 03:22:07 PM »

if the ifs box mount and steering stabilizer are are still available can i get a price shipped to 93722

kneedownnate · « **Reply #26 on:** Aug 01, 2009, 04:47:53 PM »

Ifs box mount is spoken for, but I'm making a box and will get you a quote when I get back from doing a parts trade

kneedownnate · « **Reply #27 on:** Aug 01, 2009, 04:59:08 PM »

Looks like about $12, so how bout $75 shipped?

kneedownnate · « **Reply #28 on:** Aug 02, 2009, 07:58:34 PM »

High steer sold, jigs and tubes sold, flip kit and shock hoops pending.

kneedownnate · « **Reply #29 on:** Aug 03, 2009, 07:34:44 PM »

U-bolt flip kit is gone

kneedownnate [OP]

kneedownnate [OP]

kneedownnate [OP]

kneedownnate [OP]

kneedownnate [OP]

kneedownnate [OP]

kneedownnate [OP]

kneedownnate [OP]

kneedownnate [OP]

kneedownnate [OP]

kneedownnate [OP]

kneedownnate [OP]

kneedownnate [OP]

kneedownnate [OP]

kneedownnate [OP]

kneedownnate [OP]

kneedownnate [OP]

kneedownnate [OP]

kneedownnate [OP]

Related Topics