Author Topic: Rolled 91 4runner feeler (Read 2600 times)

kneedownnate · « **on:** Jul 09, 2009, 06:15:57 PM »

Located in Redding, Ca area. I'm throwing around the idea of either parting out or selling this rig, but want to see what kind of interest I can drum up first. I'd honestly rather sell it whole than part it out.

Was a good runner before it was rolled, but the computer is now missing. Has a 22re and 5 speed, 4.10 gears and 3" body lift.

Most body panels are beat, but I think 1 of the back doors is still straight and the other is useable, and the back door is fairly straight with a slight push in on the left side.

Front seats weren't great but the rears weren't bad, just dirty.

I can get more pics if needed.

tbcruise · « **Reply #1 on:** Jul 10, 2009, 04:32:52 PM »

i have the same yr 4runner as a project im building. im also located in redding. it looks like it has gray interior....i have blue and im wanting to switch it over. let me k now if your interested in just parting with that granted it be in decent shape.

kneedownnate · « **Reply #2 on:** Jul 10, 2009, 10:32:37 PM »

I'd be willing to part with the interior for sure, but the front seats aren't great, driver's seat being worse. It's not all perfect, but there should be enough there in good shape to at least give you a good start! It likely all needs some degree of cleaning from sitting since 05, but nothing major. It's out at my old boss's house in bella vista so I can't snap any pics, but if you'd like to meet me out there at some time I could do that.

You can make me a loose offer via pm if you want so we have something to go off

kneedownnate · « **Reply #3 on:** Jul 11, 2009, 10:11:11 AM »

kneedownnate · « **Reply #4 on:** Jul 13, 2009, 10:10:35 AM »

Bump!

the_white_shadow · « **Reply #5 on:** Jul 13, 2009, 02:37:51 PM »

Bucket seats in the front? Willing to take the seat rails off of those bad front seats and ship the to 77435??

kneedownnate · « **Reply #6 on:** Jul 13, 2009, 03:56:02 PM »

Not really man, they're not that bad.

CCM Runner · « **Reply #7 on:** Jul 14, 2009, 08:48:34 PM »

do you have the hand crank for the back window?

kneedownnate · « **Reply #8 on:** Jul 14, 2009, 09:39:34 PM »

I believe so, but I can't justify selling one little item like that. Sorry man!

yota_krawler · « **Reply #9 on:** Jul 19, 2009, 01:46:03 AM »

I would like to check the runner out. I need some stuff. I will call you and we can figure something out

kneedownnate · « **Reply #10 on:** Jul 19, 2009, 04:03:47 PM »

What do you need? I'd really really rather sell it whole at this point and am prepared to take a loss.

Easier to sell parts would be the rear axle w/4.10 gears, locking hubs, front calipers, front and rear drivelines, 22re and 5spd, it'd just probably be easier to sell the rig or engine if a computer could be located!

Dingman. · « **Reply #11 on:** Jul 21, 2009, 06:38:27 PM »

i might be interested in the doors and some interior parts.

kneedownnate · « **Reply #12 on:** Jul 21, 2009, 08:21:32 PM »

Front, rear or all? What interior parts?

minitruckgirls · « **Reply #13 on:** Jul 21, 2009, 10:08:04 PM »

any idea what you want for it

kneedownnate · « **Reply #14 on:** Jul 21, 2009, 11:02:10 PM »

Not at the moment, make me an offer if you'd like

Dingman. · « **Reply #15 on:** Jul 21, 2009, 11:06:36 PM »

Probably just the front doors..

Does that 4runner have gear driven case since its a 4cyl? (sorry not familiar)

kneedownnate · « **Reply #16 on:** Jul 22, 2009, 07:51:19 PM »

Chain drive 2.57:1 or something like that, g58 tranny.

yota_krawler · « **Reply #17 on:** Jul 23, 2009, 05:20:23 PM »

i need to come look, I dont know really what all i need

86rustbucket · « **Reply #18 on:** Aug 09, 2009, 01:00:01 AM »

do it run?

kneedownnate · « **Reply #19 on:** Aug 09, 2009, 01:25:35 AM »

From my original post

Quote from: kneedownnate on Jul 09, 2009, 06:15:57 PM

Was a good runner before it was rolled, but the computer is now missing. Has a 22re and 5 speed, 4.10 gears and 3" body lift.

86rustbucket · « **Reply #20 on:** Aug 09, 2009, 11:14:05 AM »

OHH

kneedownnate [OP]

kneedownnate [OP]

kneedownnate [OP]

kneedownnate [OP]

kneedownnate [OP]

kneedownnate [OP]

kneedownnate [OP]

kneedownnate [OP]

kneedownnate [OP]

kneedownnate [OP]

Related Topics