Project "Mini-Grande"

MiniSimp · July 01, 2009, 05:20:49 PM

Ok, so got 3 out of 4 steering box bolts tightened, there is one missing, but it's easy to get to. The bottom front bolt was not so easy to get to and took about 1/2 hour to tighten with a 1/2" wrench, 12" extension, swivel head & 5/8" shallow 6pt socket.

Took it for a test drive and the thing is cherry. It drops in to gear a little hard and idles a little high, but other than that it feels mechanically sound.

The oil pan, transmission, transfer case and rear pinion all leak, but that's easy enough.

Time to go to DMV and then get serious.

MiniSimp · July 03, 2009, 04:29:26 PM

Alright! Did the DMV thing today so it's officially my wifes rig!

Now I need to start saving for parts.

Going with Procomp 6" Suspension Lift springs all around, Super Swamper 36x12.50 TSL's on black wagon wheels.

Need to find a free or cheap step side bed for 73-79 GMC and bumpers. After I get that I will ditch the flatbed.

If anybody knows anybody with one of these parked in their yard let me know.

bigarms23 · July 03, 2009, 04:37:05 PM

you would get better flex going with a suspension kit from offroad design

MiniSimp · July 03, 2009, 04:38:32 PM

Quote from: bigarms23 on July 03, 2009, 04:37:05 PM
you would get better flex going with a suspension kit from offroad design

I'm not going for flex, I already have a toyota.
This is a restoration/street truck.

bigarms23 · July 03, 2009, 04:54:26 PM

oh ok plans sounds good

MiniSimp · July 05, 2009, 05:02:38 PM

Ok, parts buying has officially started, I went to Walmart and bought a cheap battery and got a batt relocation kit and batt disconnect switch from Summit

Brand Longacre Racing Products
Manufacturer's Part Number 45761
Part Type Battery Disconnect Switches
Product Line Longacre Battery Disconnect Switches
Summit Racing Part Number LNG-45761
Switch Activation Manual
Switch Actuation Rotary (turn)
Voltage Compatibility 6-36
Continuous Amp Rating 175 amps
Surge Amp Rating 1,000 amps
Includes Alternator Disconnect No
Includes Magneto Disconnect No
Waterproof No
Mounting Bracket Included Yes
Emergency Off Decal Included Yes
Quantity Sold individually.
Notes This is a 2-terminal switch.

Brand Summit
Manufacturer's Part Number SUM-G1200A
Part Type Battery Relocation Kits
Product Line Summit® Battery Relocation Kits
Summit Racing Part Number SUM-G1200A
Relocation Kit Style Box
Battery Quantity Single
Sealed No
Battery Box Included Yes
Box Material Plastic
Box Finish Black
Battery Tray Included No
Length (in) 15.000 in.
Width (in) 9.000 in.
Height (in) 10.500 in.
Battery Cables Included Positive and negative
Positive Cable Length (in) 240 in.
Positive Cable Gauge 2-gauge
Negative Cable Length (in) 36 in.
Negative Cable Gauge 2-gauge
Hold-Down Included Yes
Quantity Sold as a kit.

fordh8r · July 05, 2009, 05:12:13 PM

Relocate? why, what's wrong with the stock battery location?

MiniSimp · July 05, 2009, 05:18:21 PM

I like the clean "hot rod" look with nothing under the hood that doesn't have to be.

fordh8r · July 05, 2009, 05:58:47 PM

Quote from: MiniSimp on July 05, 2009, 05:18:21 PM
I like the clean "hot rod" look with nothing under the hood that doesn't have to be.

Where are you gonna move it to?

MiniSimp · July 05, 2009, 07:47:17 PM

Quote from: fordh8r on July 05, 2009, 05:58:47 PM
Where are you gonna move it to?

There's a nice little spot on the inside of the PS frame rail just behind the cab that has pleanty of room for it. Just need to build a tray.

fordh8r · July 05, 2009, 08:04:36 PM

Yeah, it should fit there.

Cheesemaker · July 05, 2009, 08:07:21 PM

Mount a remote positive stud someplace in the engine compartment. That way if you have to jump start it, it would be easier than crawling underneath. All the newer cars where the battery is a afterthought has this.

MiniSimp · July 05, 2009, 08:17:32 PM

Yeah, I'll have to do something, but those remote studs are expensive!

fordh8r · July 05, 2009, 08:19:57 PM

I'm sure you can come up with something.

MiniSimp · July 05, 2009, 08:20:14 PM

fordh8r · July 05, 2009, 08:21:49 PM

Of course, a hydraulic tilt bed! Then you won't need that expensive jumper post.

MiniSimp · July 05, 2009, 08:22:58 PM

I'm a money savin genus! Da-GUM!

MiniSimp · July 06, 2009, 07:09:41 AM

Quote from: fordh8r on July 05, 2009, 08:19:57 PM
I'm sure you can come up with something.

Longacre Racing Products 45700 - Longacre Bulkhead Cable Connectors

Probably end up getting this unless I find something better. $12.00

fordh8r · July 06, 2009, 08:37:49 AM

how about this?

Ship today for 9.99.

http://www.jegs.com/i/JEGS/555/10315/10002/-1

MiniSimp · July 06, 2009, 08:39:19 AM

That would work, thanks!

fordh8r · July 06, 2009, 08:40:16 AM

$Beer Chug\'n$

MiniSimp · July 06, 2009, 08:50:16 AM

They have a double also

http://www.jegs.com/i/JEGS/555/10315K/10002/-1

fordh8r · July 06, 2009, 08:53:07 AM

twice as easy.

MiniSimp · July 09, 2009, 08:59:46 AM

My father-n-law called me last night saying he has a lead on a free bed (back wall cut out for speaker box

) and possibly a free hood and DS fender! $Beer Chug\'n$

MiniSimp · July 18, 2009, 02:15:40 PM

I need a 3.73 12B Ring & Pinion! Mine is Xploded

MiniSimp · July 18, 2009, 02:39:25 PM

$I\'m Down$ Anybody have a spare 3.73 12b Ring and Pinion?

fordh8r · July 18, 2009, 07:35:36 PM

Not anymore.

bigarms23 · July 18, 2009, 07:56:28 PM

sorry all i have is a set of 456s dor a d44 and 12bolt

MiniSimp · July 18, 2009, 10:50:25 PM

Quote from: bigarms23 on July 18, 2009, 07:56:28 PM
sorry all i have is a set of 456s dor a d44 and 12bolt

How much?

MiniSimp · July 22, 2009, 07:17:18 AM

Found a complete 12 bolt loaded with 3.73's for $150.00
Picking up Friday after work in Hollister.

News:

Project "Mini-Grande"