84 PU Crawler, 39.5's, longs, propane...

[ksmith]

84 Toyota Rock Crawler

$5000 OBO or trade for CRF450 or something similar

Selling my 84:
-All-Pro 5" springs with one leaf removed from rear to soften them up
-greasable shackles front and rear
-U-bolt flip kit front and rear
-5100 Billstiens front and rear
-shock hoops
-extended stainless brake lines
-All Pro high-Steer
-Hydro assist(Red neck ram) with drilled pump
-custom front diff guard/hydro assist mount, it's solid
-4.88 Yukons in the rear from Randy's R&P
-spooled front/rear
-1.5" wheel spacers rear
-2" spacers front
-power steering conversion, was manual steering when I bought the truck
-reinforced frame around steering box
-PROPANE conversion from GotPropane w/ 23 gallon tank
-4.7 marlin t-case
-new clutch
-new slave cylinders on rear brakes
-All-Pro flatbed kit
-Marlin tall front stinger
-8000 warn winch
-hawse fairlead
-light tabs with rectangular lights beside winch
-39.5" Iroks
-fenders have been trimmed to fit the tires, stuff nicely without rubbing or bumpstops
-Longfield 30 spline chromoloys
-Axle was rebuilt when 30's went in about a year ago, all seals and bearings were replaced except for the wheel bearings.
-seats out of a corolla or something but are a little weathered
-waterproof stereo and speakers, needs some TLC, clean the buttons
-new radiator and all hoses, replaced about a year ago
-.120 wall driveshafts front and rear
-Schaffers tube doors
Whats wrong:
-has been rolled and broke the windshield out, the roof is pretty close to where it's supposed to be. As far as mechanically, the truck, starts and runs fine but IT NEEDS A NEW SLAVE CYLINDER. No smoke and doesn't burn oil.

Nothing but the best of parts were put into this truck and it'll go anywhere the buggies will go. Almost everything was installed by an offroad shop in Lufkin, TX, www.dynamictx.com. It's been built for about three years. Asking $5000 obo, located in East Texas.
Kane Smith
[email protected]
Here is the link to the pics, the first 10 are how it is now: http://s109.photobucket.com/albums/n...%20For%20Sale/

[toyotanner]

  i think you forgot to mention drive flanges

[ksmith]

i think you forgot to mention drive flanges

Yes I did, thanks,

[ksmith]

BTT

[ksmith]

New price $4250 OBO. Someone has to want it, if you do make me an offer.

[83yota]

i want it but i dont think you will take my 79 cj5 for it

[ksmith]

i want it but i dont think you will take my 79 cj5 for it

Nah, I'm mainly interested in selling it but if you had a dirtbike we might could work something out.

[83yota]

i understand nobody wants this thing not even me

[91 super yoda]

thought you might like some help. heres the link to the build pics. good times
http://www.dynamictx.com/MessageCenterDetail.aspx?ContentID=359

[ksmith]

thought you might like some help. heres the link to the build pics. good times
http://www.dynamictx.com/MessageCenterDetail.aspx?ContentID=359

Thanks Hink, what's been going on?

[ksmith]

Clutch is fixed and it's ready to go.

[91 super yoda]

Thanks Hink, what's been going on?

not much, just moved into my new house, and got engaged. whats been oing on with you?

[ksmith]

This thing needs to go because I need the room and the money, so make me a reasonable offer.

[ksmith]

No offers? 

[Fenderbmxer86]

I have a 2009 yz250f completly modded with about 30 hours or less on it.

Also have a Pimped out MotoVan. Has tv, bed, 110 outlets, nice stereo.

Im near sacramento, ca but thought id throw it out there.

Heres 2 links.
http://pirate4x4.com/forum/showthread.php?t=811439
http://pirate4x4.com/forum/showthread.php?t=812231

[Fenderbmxer86]

forgot to mention that i dont check this board much but if your intrested can you email me at [email protected] or PM on pirate. Thanks!!

[ksmith]

No one wants to at least make a decent offer?

[wakkjobb]

Pardon my  but where are the locking hubs?

[skyscraper]

Pardon my  but where are the locking hubs?

i think you forgot to mention drive flanges

[ksmith]

Pardon my  but where are the locking hubs?

Yeah, forgot that part in the original post, it has flanges.

[thegoofster21]

wow no one wants this. i wish i had the money. bump for a sweet rig

[sirhc0306]

ill throw a BUMP for a sweet rig

[ksmith]

ill throw a BUMP for a sweet rig

Thanks, I appreciate it but I'd appreciate it a lot more if someone would buy it.

[wakkjobb]

Pardon my    ... but where are the locking hubs?

Yeah, forgot that part in the original post, it has flanges.

Thanks, I have no idea what those are (yet) but I'll poke around on search. I know about locking hubs and the IFS hubs but... flanges? I'm probably thinking about something different.   

bump-ola
>>Dan

[ksmith]

Thanks, I have no idea what those are (yet) but I'll poke around on search. I know about locking hubs and the IFS hubs but... flanges? I'm probably thinking about something different.  

bump-ola
>>Dan

No big deal, instead of having hubs that you can lock and unlock, they permanently lock the shaft to the hub, causing the front axle to always be locked in.

[thegoofster21]

bump

[ksmith]

$3500? Anyone? This is a deal...

[sirhc0306]

ttt

[wakkjobb]

That photobucket link went to a sign-in page; got the link for the actual album?

>>Dan

[85 toy crawler]

allmost there,will give you a call tonight