Author Topic: Crawlerdans 4runner part out, almost all must go (Read 16907 times)

crawlerdan · « **on:** Mar 25, 2009, 05:30:49 PM »

well guys-the end of and era has come.

i am parting out the 4runner. I AM KEEPING THE FRONT AXLE, DUALS, AND WHEELS/TIRES

other then that, it all has to go.
many of the long time board members know alot about this truck, but heres a little list.

-22re with engbldr cam, ported and polished head and intake manifold
new(within last 1000 miles)
oil pump, water pump, timing chain and cover, pan gaskets, front and rear mains, clutch, all other gaskets
comes with lc enginnering valve cover, downey header(passd CA smog), intake mani, all accessories
including a brand new starter, year old alternator, brand new fuel filter-SOLD

runs perfect, about 1000 miles since full rebuild, before taht it was at about 40k(jdm low miler)

asking 1000.00 for all that stuff-SOLD

-efi 5 speed trans, no issues, no grinding-250.00

-perfect doors and glass with full interior parts, wing windows, ect-for the pair-150.00-SOLD

-perfect rear tailgate with window and motor, all works, full interior trim-100.00-SOLD

-perfect rear seats, and front seat out of a gmc envoy, rather comfy-125.00 for all seats-SOLD

-all interior parts-tell me what you want, its perfect and in grey-SOLD

-complete EFI harness and ecu, mass air sensor wire lengthened to pass side. 100.00-SOLD

-any 22re related engine components not previously mentioned, i.e. coil ect.-SOLD

- perfect grey/rhino lined drivers fender-50.00

-brand new, never painted pass fender-50.00

-new hood with legacy turbo scoop molded in, needs a little more work but prolly 85% finished-150.00

-perfect all red taillights-40.00-SOLD

the body is nice from the firewall back, really nice actually, has good windshiels and cowl, ect- i want to sell that also-SOLD

the frame is good from the motormounts back, and the front half is there but needs to be finished-SOLD

good efi gastank-40.00-SOLD

rear spare tire/jack holder that folds down-comes with 80% tread 25 inch mtr on a black steel wheel-100.00-SOLD

also have a nice rear axle housing, with custom perches taht alow you to run with no u bolts, also has diff stud eliminator kit, new brakes-asking 125.00-SOLD

willing to trade my marlin built rear third member with 5.29s and a marlin spool for 600.00 or trade for 5.29 third taht is open/limited slip/other locker-plus cash if needed. this rear end has about 2500 miles on it-SOLD

selling 2004 siverado 63inch leafs with double shackles-100.00 for the whole deal-SOLD

if you see anything else not listed ask me.

i am open to offers but dont screw me here.

located in portland or, dont want to ship big stuff obviously

discounts will be made to those purchasing multiple parts.

and to answer the inevitable question, last night i decided its cheaper to start over then to fix it. and i want a 4 door now that i have more kids

will trade everything for a NICE 2nd gen runner

crawlerdan · « **Reply #1 on:** Mar 25, 2009, 05:33:02 PM »

also selling whole exhaust with BRAND new cat converter, flowmaster 4o series muffler, and full 2.5 inch exhaust
sounds great with the downey header.

made for 4runner or shortbed single cab, asking 150.00

EDIT- I also have a nive ifs steering box, with rag joint-75.00

crawlerdan · « **Reply #2 on:** Mar 25, 2009, 05:44:07 PM »

tire holder, will hold 2 jacks, or shocvels, whatever thats about 1.5 inches in diam

folds down, top portion removable also

kneedownnate · « **Reply #3 on:** Mar 25, 2009, 06:20:31 PM »

Quote from: crawlerdan on Mar 25, 2009, 05:33:02 PM

also selling whole exhaust with BRAND new cat converter, flowmaster 4o series muffler, and full 2.5 inch exhaust
sounds great with the downey header.

made for 4runner or shortbed single cab, asking 150.00

Pics? 2.5 od or id?

crawlerdan · « **Reply #4 on:** Mar 25, 2009, 06:23:34 PM »

Quote from: kneedownnate on Mar 25, 2009, 06:20:31 PM

Pics? 2.5 od or id?

i dont know, does it matter? standard 2.5 stainless exhaust tube, here really the only pic i got of it. passed smog recently

crawlerdan · « **Reply #5 on:** Mar 25, 2009, 07:38:14 PM »

please feel free to make offers, i know the economy blows hole right now, just be fair, or ill poop in a box and mail it to your house

Larryb · « **Reply #6 on:** Mar 25, 2009, 07:40:28 PM »

Too bad you are not closer to Fresno. I would love to buy the engine and exhaust system. Actually i would love to own that 4runner

crawlerdan · « **Reply #7 on:** Mar 25, 2009, 07:58:59 PM »

Quote from: Larryb on Mar 25, 2009, 07:40:28 PM

Too bad you are not closer to Fresno. I would love to buy the engine and exhaust system. Actually i would love to own that 4runner

road trip!

blackdiamond · « **Reply #8 on:** Mar 25, 2009, 08:01:39 PM »

Quote from: crawlerdan on Mar 25, 2009, 05:44:07 PM

tire holder, will hold 2 jacks, or shocvels, whatever thats about 1.5 inches in diam

folds down, top portion removable also

Can you get a picture with it up from the side? I may have some interest...

Pat · « **Reply #9 on:** Mar 25, 2009, 09:31:39 PM »

I want the tail gate.. How do I get it:D you going to ca anytime soon?

Aaronm · « **Reply #10 on:** Mar 25, 2009, 09:51:15 PM »

Sent you a pm on the tire holder let me know. Looks awsome

Duffil · « **Reply #11 on:** Mar 25, 2009, 10:48:36 PM »

Quote from: crawlerdan on Mar 25, 2009, 07:38:14 PM

please feel free to make offers, i know the economy blows hole right now, just be fair, or ill poop in a box and mail it to your house

how much for just the poop shipped to 95361? I'd like to see what BLM says if I transplant OR poo into CA forests.

NCK4L · « **Reply #12 on:** Mar 25, 2009, 10:55:36 PM »

i was wondering if you ever came south at all around redding ca i could use some interior parts, that exhaust and all your seats i could maybe meet you too in southern oregon let me know..... no rush on anything

redsrunner · « **Reply #13 on:** Mar 26, 2009, 12:23:39 AM »

i am interested in a lot of the parts you have to offer. if you could send me a pm with your phone number that would be easier to communicate with you. i know i am new here but i am part of a few other forums and do not have any bad reps on any of them.

TIMS89CRAWLER · « **Reply #14 on:** Mar 26, 2009, 12:43:23 AM »

I should have $200 tomorrow I dont know if you would be interested in selling the trans for that? I can pick up as I am only about 60 miles down 5 from ya! please let me know mine makes lots of noise...

crawlerdan · « **Reply #15 on:** Mar 26, 2009, 04:13:15 AM »

Quote from: blackdiamond on Mar 25, 2009, 08:01:39 PM

Can you get a picture with it up from the side? I may have some interest...

crawlerdan · « **Reply #16 on:** Mar 26, 2009, 04:14:30 AM »

Quote from: Pat on Mar 25, 2009, 09:31:39 PM

I want the tail gate.. How do I get it:D you going to ca anytime soon?

i MIGHT be able to get it to auburn for you, for a small fee, ill look into it

crawlerdan · « **Reply #17 on:** Mar 26, 2009, 04:14:57 AM »

Quote from: Duffil on Mar 25, 2009, 10:48:36 PM

how much for just the poop shipped to 95361? I'd like to see what BLM says if I transplant OR poo into CA forests.

crawlerdan · « **Reply #18 on:** Mar 26, 2009, 04:15:56 AM »

Quote from: NCK4L on Mar 25, 2009, 10:55:36 PM

i was wondering if you ever came south at all around redding ca i could use some interior parts, that exhaust and all your seats i could maybe meet you too in southern oregon let me know..... no rush on anything

not really man, if i do im working and cant haul parts

crawlerdan · « **Reply #19 on:** Mar 26, 2009, 04:16:33 AM »

Quote from: redsrunner on Mar 26, 2009, 12:23:39 AM

i am interested in a lot of the parts you have to offer. if you could send me a pm with your phone number that would be easier to communicate with you. i know i am new here but i am part of a few other forums and do not have any bad reps on any of them.

503-333-1251

crawlerdan · « **Reply #20 on:** Mar 26, 2009, 04:17:09 AM »

Quote from: TIMS89CRAWLER on Mar 26, 2009, 12:43:23 AM

I should have $200 tomorrow I dont know if you would be interested in selling the trans for that? I can pick up as I am only about 60 miles down 5 from ya! please let me know mine makes lots of noise...

if you help me pull it - and bring

gnob · « **Reply #21 on:** Mar 26, 2009, 08:58:55 AM »

did that thing have rear heat?
if so what do you want for the center console?

SolidAxle · « **Reply #22 on:** Mar 26, 2009, 09:09:19 AM »

Hey, sorry to see your parting the truck out. you don't still have front shackles do you? I'm guessing you don't need pics of the engine harness now eh.

NCK4L · « **Reply #23 on:** Mar 26, 2009, 09:16:40 AM »

PM sent

TIMS89CRAWLER · « **Reply #24 on:** Mar 26, 2009, 09:21:40 AM »

the one thing I forgot to ask is the transmission a forward shift or top shift? and I would be down to help pull it and bring some beers.... I am waiting for a few people to come buy some parts from me then I will have the cash.... thanks bro and let me know if its top or forward shift... thx

redsrunner · « **Reply #25 on:** Mar 26, 2009, 09:34:06 AM »

wiring harness front to rear
exhaust front to rear
tailgate
tire holder
email me at redsrunner@hotmail.com

toytank · « **Reply #26 on:** Mar 26, 2009, 10:29:33 AM »

what do you want for the front rear bumpers and sliders

John S. · « **Reply #27 on:** Mar 26, 2009, 10:54:26 AM »

How much for the fuel sending unit, for the fuel gauge, if its good?

the_white_shadow · « **Reply #28 on:** Mar 26, 2009, 11:25:30 AM »

Are you keeping the brake booster and master cylinder? Are they stock pieces or did you upgrade them? I need some for my '82 truck.

Thanks.

Alex

crawlerdan · « **Reply #29 on:** Mar 26, 2009, 02:49:44 PM »

Quote from: gnob on Mar 26, 2009, 08:58:55 AM

did that thing have rear heat?
if so what do you want for the center console?

nope

crawlerdan [OP]

crawlerdan [OP]

crawlerdan [OP]

crawlerdan [OP]

crawlerdan [OP]

crawlerdan [OP]

crawlerdan [OP]

crawlerdan [OP]

crawlerdan [OP]

crawlerdan [OP]

crawlerdan [OP]

crawlerdan [OP]

Related Topics