malin SAS works good

[94toytruck]

http://members29.clubphoto.com/eric835328/2655095/owner-504b.phtml

green 3rdgen is mine.did marlins SAS install went easy.no probs anywhere.i i removed 2 leafs from ft spring pack till i get my winch and bumper on.dropped ft 2 inchs removing leafs.rear is some downey springs matched up with some other stuff i had.over all works great.thanks marlin and thanks chris for helping me out with any questions i had.

[derek]

 

[BigMike]

** Fixed your avatar! **

[94toytruck]

thanks big mike .funny i could have sworn it was the smaller one i loaded .

[guywithuglyyota]

hey 94truck, why did you relocate your shocks in the rear? Im guessing for more travel. Im about to lift the rear of my truck with marlins kit but I was planning on leaving the shocks in the stock configuration.  Nice truck BTW

[WHITE_TRASH]

Because if you leave the shocks in the stock forward/aft configuration it limits wheel travel severly.  By going to an inverted Y setup or at least putting them straight up and down inbetweent he springs you gain a lot of usable travel.

[guywithuglyyota]

thats what i figured, thanks WT