Author Topic: fuel injector cleaning/flow testing/recalibration  (Read 2369 times)

0 Members and 1 Guest are viewing this topic.

peacesells

  • Offline 4WD Legend
  • *****
  • Turtle Points: -17
  • Male Posts: 791
  • Member since Jul '08
  • motley lou
    • View Profile
fuel injector cleaning/flow testing/recalibration
« on: Jan 19, 2009, 11:50:25 PM »
If anyone here has had this done, where is a good quality decently priced place? lc charges $200, rc charges $96 for 4, another place I found called coastal charges $16 each, but I want the best quality for the best price. any expericences?

http://www.rceng.com/Fuel-Injector-Cleaning-P43C0.aspx

http://www.toyotacatalog.net/M1WebGear/ProductDetails.aspx?PartUniqueID=67C497FC-C2BA-4440-B1DC-601041B7D8F3

http://www.cruzinperformance.com/fuelinj.html
this my man lysol, fresh out the joint

Volcom

  • Offline The 2K Group
  • ***
  • Turtle Points: 269
  • Male Posts: 2,418
  • Member since Sep '04
  • Colorado Rocks!
    • View Profile
    • http://www.rockfrogs.org
84 4Runner
Swapped EFI and a rebuilt 22RE
Marlin Dual Ultimate crawler
Marlin high steer
TG springs
5.29's, Aussie locked front and rear
39.5" Iroks on 15x10 2.5" backspaced wheels
109" wheelbase
Addicted Off Road 8 point cage
Addicted Off Road front bumper

Addicted Off Road

Colorado Marlin members, check out the Colorado section!!!

Cheesemaker

  • Rock Ninja
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1363
  • Male Posts: 4,525
  • Member since Sep '04
  • Dean Tyler, you were an inspiration to all!!
    • View Profile
Miss ya Dean (4THEWKN) & Kyle (KYOTA)!!

4THEWKN~9/17/2006  If it wasn't for you, I'd be driving something other than a Toyota!

My build up ~ project Kilchis! http://board.marlincrawler.com/index.php?topic=32961.0
Zak's truck build ~ http://board.marlincrawler.com/index.php?topic=64319.0;topicseen

NorCalToy

  • Official Super Badass
  • Offline The 2K Group
  • ***
  • Turtle Points: 77
  • Male Posts: 2,472
  • Member since Jun '07
  • IFS no longer! - Member #8342
    • View Profile
    • Buy me a beer
what kinda difference does having them cleaned make? :dunno:
:willynilly: '89 truck SAS sittin on 35's, Tacoma rear axle w/ E-Locker, welded front

kneedownnate - You can go through life being scared of the possible, or you can have a little fun and tease the inevitable

iɹǝʌo ǝɯ ııoɹ sıɥʇ pɐǝɹ uɐɔ noʎ ɟı

:flamer: IFS

*ROKTOY*

  • Offline The 1K Club
  • *
  • Turtle Points: 0
  • Male Posts: 1,066
  • Member since Nov '06
    • View Profile
I have used cruzin performance and have been very happy with them. As far as a difference goes, engine runs much smoother and stronger.

Cheesemaker

  • Rock Ninja
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1363
  • Male Posts: 4,525
  • Member since Sep '04
  • Dean Tyler, you were an inspiration to all!!
    • View Profile
If you go to my link, you can see the report on my injectors.  They flow test them before cleaning, and then flow them after.  I had a 12.1% difference between them.  That means that you have at least one injector putting 12% less fuel in a cylinder.  Means a loss of power, and poor fuel consumption.  By cleaning the injectors I got them to less than 1% difference. 

It's just cheap insurance to having your motor running the best it can. 
Miss ya Dean (4THEWKN) & Kyle (KYOTA)!!

4THEWKN~9/17/2006  If it wasn't for you, I'd be driving something other than a Toyota!

My build up ~ project Kilchis! http://board.marlincrawler.com/index.php?topic=32961.0
Zak's truck build ~ http://board.marlincrawler.com/index.php?topic=64319.0;topicseen

*ROKTOY*

  • Offline The 1K Club
  • *
  • Turtle Points: 0
  • Male Posts: 1,066
  • Member since Nov '06
    • View Profile
X2 Cruzin will do the same and send you a link to the results which you can go on-line and see any time, they also assign a serial number to each injector and keep a permanent record of the work they did.

peacesells [OP]

  • Offline 4WD Legend
  • *****
  • Turtle Points: -17
  • Male Posts: 791
  • Member since Jul '08
  • motley lou
    • View Profile
Got my injectors back from witchhunter today, they did an awesome job!! Sent them out last wed and got them back monday. Wasnt expecting them for another few days. all new screens, new o rings, new end caps, and they look like brand new!! I sent in my cold start and a spare injector, 6 injectors total and with return shipping was $108. there was an 8.8% variance between the 4 that came out of my motor, although none of them were terribly out of tune I bet it will run much better now. Hope to have it back together for sunflower mine loop this saturday with the new header and exhaust.
this my man lysol, fresh out the joint

peacesells [OP]

  • Offline 4WD Legend
  • *****
  • Turtle Points: -17
  • Male Posts: 791
  • Member since Jul '08
  • motley lou
    • View Profile
by the way roktoy, your picture is on that bump before the little waterfall on elvis right? I passed you that day, my 4runner was white with 35's on it back then.
this my man lysol, fresh out the joint

peacesells [OP]

  • Offline 4WD Legend
  • *****
  • Turtle Points: -17
  • Male Posts: 791
  • Member since Jul '08
  • motley lou
    • View Profile
Got my truck all back together yesturday, started right up and runs SMOOOOOOOOOOOTH... Drove it around today for an hour or so before tomorrows run.. MUCH more power!! I had a vibration on the highway between 63 and 70 I couldnt get rid of, turned out it was the motor running rough from the nasty injectors.. The stick never shakes anymore.. Awesome..

I HIGHLY reccomend this to anyone with a rough running 22re...
this my man lysol, fresh out the joint

 
 
 
 
 

Related Topics

3 Replies
3085 Views
Last post Feb 26, 2006, 09:51:32 AM
by Volcom
11 Replies
3346 Views
Last post Sep 25, 2007, 12:44:24 PM
by *ROKTOY*
0 Replies
1017 Views
Last post Oct 19, 2008, 11:50:56 AM
by Lonestar Honcho
1 Replies
1315 Views
Last post Apr 24, 2011, 11:03:10 AM
by lone walker
15 Replies
13160 Views
Last post Jul 06, 2016, 03:19:25 PM
by Gnarly4X