Author Topic: doors, fenders, top, 22re....cheap, 3.0 starter, alt. motor mount spacers (Read 3966 times)

Steve_925 · « **on:** Dec 22, 2008, 06:36:11 PM »

i have two 2nd gen fenders both in good but not perfect shape $20 each

one driver door, electric, good shape $40

pass door, with wing window, gears are striped so you have to pull the window up $25

4runner top good shape couple small cracks in fiberglass $20

22re rebuild kit with block, head, crank, fly wheel, part of the intake man., throttle body.
comes with full rebuild kit all gaskets, new pistons, wrist pins, timing chain kit, bearings etc etc $300

3.0 v6 starter. has been rebuilt and not used. $30

3.0 alterantor same same same same same. $same

o yea i also have the motor mount lifters(to raise your engine) 2.5"
paid like $100 for them never evn bolted them up. __________________> $50
--------------------->

Steve_925 · « **Reply #1 on:** Dec 22, 2008, 07:00:47 PM »

im in antioch ca (east bay/nor cal

Steve_925 · « **Reply #2 on:** Dec 22, 2008, 07:09:59 PM »

o yea i also have the motor mount lifters(to raise your engine) 2.5"
paid like $100 for them never evn bolted them up.

ill take $50 for them

joey0712 · « **Reply #3 on:** Dec 22, 2008, 10:41:01 PM »

Where r u from man im interested in the rebuild kit

Thomas P · « **Reply #4 on:** Dec 22, 2008, 10:43:58 PM »

Quote from: steve_925 on Dec 22, 2008, 07:00:47 PM

im in antioch ca (east bay/nor cal

joey0712 · « **Reply #5 on:** Dec 23, 2008, 08:03:05 AM »

My bad it was late....

Steve_925 · « **Reply #6 on:** Dec 24, 2008, 03:32:29 PM »

Steve_925 · « **Reply #7 on:** Dec 28, 2008, 04:05:44 PM »

bigarms23 · « **Reply #8 on:** Dec 28, 2008, 06:43:45 PM »

what color is the top

wampum · « **Reply #9 on:** Dec 28, 2008, 07:36:33 PM »

What do those motor mount lifters look like? Pic?

Steve_925 · « **Reply #10 on:** Dec 29, 2008, 04:18:28 PM »

Quote from: bigarms23 on Dec 28, 2008, 06:43:45 PM

what color is the top

black, grey interior

Steve_925 · « **Reply #11 on:** Dec 29, 2008, 04:20:17 PM »

Quote from: Wampum on Dec 28, 2008, 07:36:33 PM

What do those motor mount lifters look like? Pic?

the link for the site i got it off of

http://4crawler.com/4x4/ForSale/MotorMount.shtml

Steve_925 · « **Reply #12 on:** Dec 31, 2008, 04:42:48 PM »

anothercrazycooter · « **Reply #13 on:** Jan 01, 2009, 09:33:45 AM »

will the fenders work on an 88 4 runner?

4RunnerChevy · « **Reply #14 on:** Jan 01, 2009, 09:38:07 AM »

Pics of passenger door, and do you ever make it to Santa Cruz.

Steve_925 · « **Reply #15 on:** Jan 01, 2009, 02:51:49 PM »

Quote from: anothercrazycooter on Jan 01, 2009, 09:33:45 AM

will the fenders work on an 88 4 runner?

yes they will

Steve_925 · « **Reply #16 on:** Jan 01, 2009, 02:53:30 PM »

Quote from: 4runnerchevy on Jan 01, 2009, 09:38:07 AM

Pics of passenger door, and do you ever make it to Santa Cruz.

santa cruz is about an hour and a half from here. i dont really go down there. hollister is pretty close to you right? ill get a pic later today

4RunnerChevy · « **Reply #17 on:** Jan 01, 2009, 03:05:51 PM »

Quote from: steve_925 on Jan 01, 2009, 02:53:30 PM

santa cruz is about an hour and a half from here. i dont really go down there. hollister is pretty close to you right? ill get a pic later today

Yeah hollister is about an hour away. Awaiting the pic.

anothercrazycooter · « **Reply #18 on:** Jan 01, 2009, 03:06:24 PM »

Please send pics of passenger fender to dcobrien2@verizon.net. Thanks.

Steve_925 · « **Reply #19 on:** Jan 01, 2009, 03:20:47 PM »

Quote from: 4runnerchevy on Jan 01, 2009, 03:05:51 PM

Yeah hollister is about an hour away. Awaiting the pic.

as i said before the gears dont work in the window crank, so you have to pull the window up by hand. in one of the pics you can see the small dent/scrape. thats it

Steve_925 · « **Reply #20 on:** Jan 01, 2009, 03:28:24 PM »

Quote from: anothercrazycooter on Jan 01, 2009, 03:06:24 PM

Please send pics of passenger fender to dcobrien2@verizon.net. Thanks.

you can see the corner i trimmed in one pic, and in the other the lip thats a little rolled in

anothercrazycooter · « **Reply #21 on:** Jan 01, 2009, 03:49:46 PM »

Didn't know the fender was trimmed. No thanks. Happy New Year!

Steve_925 · « **Reply #22 on:** Jan 03, 2009, 12:00:32 PM »

Steve_925 · « **Reply #23 on:** Jan 10, 2009, 11:06:31 PM »

bump....engine comes with free engine stand

Steve_925 · « **Reply #24 on:** Jan 13, 2009, 10:01:00 PM »

Loosekannon · « **Reply #25 on:** Jan 14, 2009, 03:06:41 PM »

DAMN I wish I wasn't so far, I would be all over that engine. Out of the country right now and won't be back till end of Feb.

If you still have it around then, I will hit you up.

Steve_925 · « **Reply #26 on:** Jan 14, 2009, 10:04:37 PM »

i could ship the rebuild parts cheap

Steve_925 · « **Reply #27 on:** Jan 21, 2009, 02:43:02 PM »

Steve_925 [OP]

Steve_925 [OP]

Steve_925 [OP]

Steve_925 [OP]

Steve_925 [OP]

Steve_925 [OP]

Steve_925 [OP]

Steve_925 [OP]

Steve_925 [OP]

Steve_925 [OP]

Steve_925 [OP]

Steve_925 [OP]

Steve_925 [OP]

Steve_925 [OP]

Steve_925 [OP]

Steve_925 [OP]

Related Topics