Formula Toyota Chassis

[EarlKann]

It is with great sadness that I'm posting my Formula Toyota chassis for sale.

My finances just do not allow me to finish it the way that I want to, and I refuse to throw it together with plans to "fix" or re-do it at a later time.  My  wife and I have committed to getting ourselves prepared to purchase another house when the time is right, and that plan will not allow me to make the comp schedule even if I could get the car built. 

I'm not quite prepared to go full on Dave Ramsey though, so I'll be keeping my drivetrain and putting it into a cheap pickup so that I can get out wheeling locally again.

Here's the specs.

Formula Toyota 2-seat chassis #88

I think that it has every option.
DOM chassis
Side panel bracing
Dash bar
Back seat bar
Grill hoop
Chassis drilled for air storage

This puts the chassis at a little under $1800

Chassis is tacked to an 83 standard cab shortbed 4wd frame using Hendrix F-Toy chassis mounts.  Frame has many hours of work into welding up all the holes and cleaning off all the brackets.  The factory engine mounts are still on the frame as a reference point to build new ones the allowed 8-inches back, 1-inch down.

Front and rear crossmembers from ToolBox Guy/80Proof 
Rear is a fully integrated chassis mount with anti inversion shackles and inboarded rear leaf spring mounts.  All very bling.

Everything is just tacked together in case you don't like how I set anything up.  This will make it a bit fragile to move though.  I can put some more weld on things for transport if requested.

I have a clear title OHV title for an 87 4runner with the matching vin plate from the dash and a current green sticker registration. 

EDIT: $2000 for everything listed above or $1200 for just the F-Toy Chassis. 

Located in Riverside, SoCal. 

[EarlKann]

[broken wrench]

wow, wish I had the cash and parts! bump

[al76]

Hey Donald are you going to get another rig?

[Tool Pimp]

Hey Donald are you going to get another rig?

duh

[al76]

 

[EarlKann]

Hey Donald are you going to get another rig?

I have a new project, but it's still top secret.     Hoping to debut at New Years.

[Tool Pimp]

    

[EarlKann]

   

http://www.youtube.com/watch?v=xjNzcjFgV6s

[Jakesteads]

sick chassis

[LOCKEDRUNNER]

Please pm me on the chassis and do the springs go with it. If so what springs are you using???

[EarlKann]

Please pm me on the chassis and do the springs go with it. If so what springs are you using???

No springs, I'm using them for something else.  Just the chassis, frame and the fancy dimple died crossmembers/shackles/hangers.  Open to offers.

What would you like to know?

[the beast]

Whats the probability of shipping to WV.? Know Poly Performance does for $500.00 bucks...any ideas..I assume it is still for sale...I would r22 and twinstick it....my son found this and I am holding off till we see what options you have there to ship...  thanks  Charlie

Noticed you springs are further inboard than most of these Ive seen..what were your plans?  Marlins are on the outside of the red rig.  Were youusing rear springs on the front to add length?   Sorry bad angle on Iphone....I see the spring set up now...know problem there.

[EarlKann]

$500 sounds cheap to me.  I really don't know anything about what shipping costs or how to even do it.  If you're really interested I can ask this guy for a quote.  I've met him and he's a good guy.

http://www.pirate4x4.com/forum/showthread.php?t=734876

The rear springs are set up to be inboarded to the same width as the front springs which is what the Formula Toyota competition rules allow.  The Marlin Crawler rig and every other competiton F-Toy I've seen is set up this way, just with many different styles of shackels.  Inboarding the rear springs allows the axle to create more leverage for more flex.  The front springs in the pictures are Allpro 4"

[8Snaces]

THAT IS AWESOME!!! Wish i had some room in the garage. SICK RIG BRO!! Hope it goes to a good home.

[EarlKann]

FYI, Chris can probably get it to WV for $500 but you would have to decide soon as he is leaving on Monday!

[EarlKann]

BTT

$2000 for everything or will sell just the chassis for $1200

May trade for something more easily re-sellable.

[dune_it86]

i haven't read any replies so i dont know if u have said anything about trades, but i have a super sick custom paint 96' yamaha banshee it has a powder coated frame fresh built ported and polished 350cc motor and all the other custom fixins... i really want $4500 but i really wanna buggy so i would totally trade strait accross, i am in the army station in oklahoma right now but the banshee is at my dads in oregon!

[EarlKann]

i haven't read any replies so i dont know if u have said anything about trades, but i have a super sick custom paint 96' yamaha banshee it has a powder coated frame fresh built ported and polished 350cc motor and all the other custom fixins... i really want $4500 but i really wanna buggy so i would totally trade strait accross, i am in the army station in oklahoma right now but the banshee is at my dads in oregon!

Don't have much use for a quad.

Pretty sure that I have it sold.  Waiting on payment.  Thanks for the interest.

[dizzydevil]

Well..............is it sold?

[EarlKann]

Still waiting on the muulah. 

[bigbluefj]

BTT

$2000 for everything or will sell just the chassis for $1200

May trade for something more easily re-sellable.

I have 88 ZX10 bike i don't use to much would you like something like that for a trade??

[Tool Pimp]

He sold it bro....