The red rocket *Four link done..... Going turbo

Started by joey0712, October 05, 2008, 10:02:49 PM

0 Members and 3 Guests are viewing this topic.

Aaronn

Quote from: joey0712 on April 08, 2009, 10:17:21 PM
The back of my truck is all u will be seein when i pass u at 8000 rpms!

::) and most likely the underside @ 0 rpm shortly after that

joey0712

nah I have been reading about it alot.... 50-75 is really safe.
91 Toyota High pinions f&r.

skyscraper

Ya if you got a solid bottom end.  I wouldnt go higher unless you have nitrous pistons.  oh, and wait till I build up my 73 toy, then we will race.

joey0712

Shoot i think u better just get one of your trucks on a trail then will talk! U still goin to the hammers?
91 Toyota High pinions f&r.

joey0712

well it runs again. The pump is workin good so far..... Im still rounding up a few things for the nitrous just need one more fuel jet. Im switching from a dry shot to a wet.I shoud ave it on after the Hammers trip.
91 Toyota High pinions f&r.

skyscraper

Quote from: joey0712 on April 09, 2009, 02:49:49 PM
Shoot i think u better just get one of your trucks on a trail then will talk! U still goin to the hammers?

Ya isnt that the truth.  Ya I'm goin, not sure how ready the truck will be, but I'm takin it anyway.  I dont know if I'll wanna run the hard stuff without a cage but whatever.

joey0712

u will be fine i rolled mine a bunch without a cage
91 Toyota High pinions f&r.

skyscraper

#127
ya....we will see.  I got my die and notcher today so its time to get started on it.  Oh, and are you planning on running your bottle upside down like that? 

Bazzi

nice... I haven´t read much about this but what´s so special with these fuel cells ? why using the cell instead of the stock tank?
4runner body on a hilux frame = Hi-Runner.
2,4 dti duals 2,28 x 2,28 to 8" 5.71 with arb´s  and 39,5" trxus
gathering parts for my goal which is
350 Chevy 700r4 auto to 2.28 x 4.70  and 4.88 9,5" cruisers diffs,diamondaxles and cable lockers, 44" richard cepecs

joey0712

 My stock tank just hung down so low i was always hung up on it. The fuel cell also wont spill when ya roll over. My stock tank leaked really bad on sidehills.
91 Toyota High pinions f&r.

toyotamobing

did you get you winch line hanger welded on yet? and get that NOS hooked up!!!!!!
1996 Tacoma 3rz auto 4x4
1993 Jeep XJ 2 door 5spd 4cyl 4x4
1996 Dodge 3500 12V 5spd 4x4

@alteredegospeedshop

MAKING A SLOW TRUCK GO FAST SINCE 2003

!!POLY GOATS!!
www.polygoats.com

POLY PERFORMANCE
www.polyperformance.com

joey0712

I got winch rope....... No nos yet its goin on  sfter the hammers son!
91 Toyota High pinions f&r.


joey0712

91 Toyota High pinions f&r.

joey0712

Well after wheelin without doors i started gettin a little scared of floppin and havin a stone poke my head. Heres my doors i made this afternoon.
91 Toyota High pinions f&r.

toyotamobing

sweet!!! now your doors cant get stuck on your sliders
1996 Tacoma 3rz auto 4x4
1993 Jeep XJ 2 door 5spd 4cyl 4x4
1996 Dodge 3500 12V 5spd 4x4

@alteredegospeedshop

MAKING A SLOW TRUCK GO FAST SINCE 2003

!!POLY GOATS!!
www.polygoats.com

POLY PERFORMANCE
www.polyperformance.com

joey0712

Yep and no more big gals in the rig..... Unless we have a sazall handy
91 Toyota High pinions f&r.

toyotamobing

1996 Tacoma 3rz auto 4x4
1993 Jeep XJ 2 door 5spd 4cyl 4x4
1996 Dodge 3500 12V 5spd 4x4

@alteredegospeedshop

MAKING A SLOW TRUCK GO FAST SINCE 2003

!!POLY GOATS!!
www.polygoats.com

POLY PERFORMANCE
www.polyperformance.com

NorCalToy

i really like teh way those "doors" are setup. it looks awesome.
:willynilly: '89 truck SAS sittin on 35's, Tacoma rear axle w/ E-Locker, welded front

kneedownnate - You can go through life being scared of the possible, or you can have a little fun and tease the inevitable

iɹǝʌo ǝɯ ııoɹ sıɥʇ pɐǝɹ uɐɔ noʎ ɟı

:flamer: IFS

Duffil

:rofl:

There are a ton of Portuguese where I'm at. You are making them cringe with those doors. I don't see any cow crap, liquid feed or duct tape which shows me you have a bunch to learn about being a "portagee". :joke:


joey0712

Quote from: NorCalToy on April 28, 2009, 10:20:05 PM
i really like teh way those "doors" are setup. it looks awesome.
Thanks dude!
Quote from: Duffil on April 28, 2009, 10:27:15 PM
:rofl:

There are a ton of Portuguese where I'm at. You are making them cringe with those doors. I don't see any cow crap, liquid feed or duct tape which shows me you have a bunch to learn about being a "portagee". :joke:



I try not to let my true colors show when i build stuff haha
91 Toyota High pinions f&r.

joey0712

This is the classic portagee dd
91 Toyota High pinions f&r.

Duffil


Aaronn


snowshoebrue

Quote from: Duffil on April 28, 2009, 10:27:15 PM
:rofl:

There are a ton of Portuguese where I'm at. You are making them cringe with those doors. I don't see any cow crap, liquid feed or duct tape which shows me you have a bunch to learn about being a "portagee". :joke:

not a true portagee, i don't see any hairy women, or dodge trucks with the towing mirrors flipped out



80proof ftoy#20

Quote from: joey0712 on April 28, 2009, 08:25:21 PM
Well after wheelin without doors i started gettin a little scared of floppin and havin a stone poke my head. Heres my doors i made this afternoon.






A "Little Scared"?  You didn't even come close to flopping and you were squeelin' like a catholic school girl at an Eminem concert!

Oh yeah, who the heck bent up your rear shock mounts???

joey0712

Aaron bent the shock hoops for me. Im pretty sure i used your tabs on the top..
91 Toyota High pinions f&r.

80proof ftoy#20

So off topic fagmo, who manned up  and killed all those nice deer hangin in the shop???

joey0712

91 Toyota High pinions f&r.

80proof ftoy#20

Quote from: joey0712 on April 29, 2009, 09:56:55 PM
Some are mine... Some are my dads






Nice!! You're cooler than Aaron says you are! Door tubes look good by the way. Good thing you're a skinny redneck or you wouldn't fit . I used to be one back in the day.