Official MCR7 Carnage Thread

Started by kiyul4130, September 18, 2008, 10:35:00 PM

0 Members and 1 Guest are viewing this topic.

kiyul4130

alright what did you break? i see the who did not break thread, but this is the opposite. if you broke a damn clothes hanger clip in the cab or chipped your big toe nail let us know. ill start.

1. 45 minutes or so into the trail i snapped an output clean in half.
2. next morning i wheeled to the box and broke my front driveline (u-joint at the tcase). backing it up out of little sluice the slip was hanging there and caught on a rock and snapped the other ujoint and yoke on the diff end. other than that i had a great time.  ::)  :beer:
-kiyul-
92 1 ton ex cab, marlin dual ultimates, 42 iroks, hydro assist, flat bellied, linked and more...
ECV 7-11

KYOTA FOREVER

Doof

3 grade 8 bolts for my front DL about half way up caddy hill

inmyownsummerami

I rode my WR250f in and didn't break any thing until right before buck on the way back to Loon Sunday afternoon.
So far the damage report is as follows:
Bent rear brake rotor
Bent rear sprocket
Destroyed chain guide/slider
Gouged up chain
Skid plate wings bent up and cracked welds
Nearly wasted rear tire

The more I think about the ride the more I want to do it again once I get some protection for the rotors.
WHITE WHEEL ROCK CRAWLERS "If your wheels ain't white, they ain't right"
:greengrin:My 1st Gen. Toyota SAS (2wd to 4wd) :greengrin: (In Progress)
RIP "Goody Goods" My DDW Brother

bigbluebeater

one truck in our group had a siezed wheel bearing before we got to the trail head. and another truck had his marlin 4.7 gear set break before soup and salad.
1991 Toyota 4runner, Exo Cage, 3.4l V6 5vz-fe, R150F, Marlin Chromo Dual Ultimate, Dana 60 Spool, Dana 70u Spool, 6.17 gears, PSC Full Hydro Steering, 40in Trep Stickies, Stazworks Beadlocks, Warn 9.5xp

yota18

the only thing i got was some nice rock rash on squeeze rock on big slucie

kiyul4130

Quote from: bigbluebeater on September 19, 2008, 04:02:06 PM
one truck in our group had a siezed wheel bearing before we got to the trail head. and another truck had his marlin 4.7 gear set break before soup and salad.

explain more? like the input gear blew up? thats very rare/doesnt happen ever.
-kiyul-
92 1 ton ex cab, marlin dual ultimates, 42 iroks, hydro assist, flat bellied, linked and more...
ECV 7-11

KYOTA FOREVER

bigbluebeater

He hasn't torn it apart yet but it still worked in 4wd high range but it would pop and bang in low range like the gears were stripped or had teeth missing, and it would not move.
1991 Toyota 4runner, Exo Cage, 3.4l V6 5vz-fe, R150F, Marlin Chromo Dual Ultimate, Dana 60 Spool, Dana 70u Spool, 6.17 gears, PSC Full Hydro Steering, 40in Trep Stickies, Stazworks Beadlocks, Warn 9.5xp

BLACKDOG

4 axles broke (shaft sheared)
1 hub stripped
1 hub stud sheared
severe body damage on D side door, xcab, and bed
taillight
front corner light
cracked axle housing
:usa: Its better to die on your feet than live on your knees :usa:

"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. "

"I don't believe in a government that protects us from ourselves."
              -Ronald Reagan

Don't take life too seriously, it isn't permanent

bigarms23

cracked stub shaft
bad passenger side wheel bearing
brused ego
broken hub
steering rod hitting the oil pan
88 4runner 2016 5.3 auto atlas 2 on tons and tons of fun

*FFC*

Quote from: BLACKDOG on September 21, 2008, 07:36:05 AM
4 axles broke (shaft sheared)
1 hub stripped
1 hub stud sheared
severe body damage on D side door, xcab, and bed
taillight
front corner light
cracked axle housing

You what??? I didn't hear bout that one! :yikes:
"Yesterday is history, tomorrow is a mystery, today is a gift - that's why they call it the present." - RW Emerson -

toyotanner


and some little dings here and there

Blingn

Quote from: FordFreakChik on September 21, 2008, 08:17:28 PM
You what??? I didn't hear bout that one! :yikes:
i think he did that when you girls walked ahead to buck

munkey

Well, for the second run on Aarons runner he only broke a u-joint and a D60 stub shaft when it bound in the box. Other than that a bit of body crunching was all, but hey, chicks dig body damage, lol.


Rockcrawlintoy

you got a pick of aarons sliders. and are you the one lookin for some MTRs
Resident Jeep Guy
2007 JKU All Stock
ECV 7-11

Jud

One Ton Single Cab  - http://board.marlincrawler.com/index.php?topic=48229

"bout tree fiddy"

BLACKDOG

Quote from: FordFreakChik on September 21, 2008, 08:17:28 PM
You what??? I didn't hear bout that one! :yikes:

meh, its small, got gear oil leaking out around the spring perches. 
:usa: Its better to die on your feet than live on your knees :usa:

"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. "

"I don't believe in a government that protects us from ourselves."
              -Ronald Reagan

Don't take life too seriously, it isn't permanent

Georgetown_Local

#16
20 minutes into the Slabs at the steps I ripped the rear drive shaft in half. :yikes:  10 minute repair. quick swap
on the way out when backing up I flopped the truck onto the drivers side crunched the window pillar and smashed the windshield and Door :hammerhead:
Wasted a drivers side Birf and stripped the splines on the Axle . Thank you to the Guys that sold me the Whole axle and birf on the slabs above Buck. Good Deal  :biggthumpup:
Georgetown Ca.
Gateway to the Rubicon.
MCR 09 I'm Number 4 on the list

sake bomb


sake bomb

whats up rick! you rolled too?
we broke 2 transfer case mounts, transmission mount, rear leaf springs, 3 axles, kc lights, crushed both front fenders, and the funniest one was a dude in a yota side swiped us.

kiyul4130

Quote from: sake bomb on October 04, 2008, 01:35:39 PM
whats up rick! you rolled too?
we broke 2 transfer case mounts, transmission mount, rear leaf springs, 3 axles, kc lights, crushed both front fenders, and the funniest one was a dude in a yota side swiped us.

that'd be enough to make me give up on wheeling...
-kiyul-
92 1 ton ex cab, marlin dual ultimates, 42 iroks, hydro assist, flat bellied, linked and more...
ECV 7-11

KYOTA FOREVER

sake bomb

NA wheeling is to much fun. built it bigger and better or just buy a yota. :driving: :thumbs:

Georgetown_Local

#21
Quote from: sake bomb on October 04, 2008, 01:35:39 PM
whats up rick! you rolled too?

Yeh I tipped over when I was backing up. :hammer: Then the Birf went bye bye :smack: it took us about an hour to get going again. We  had a great time with you  Guys     :beer: :clap:   

Hey check out these pics http://marlincrawlerroundup7.shutterfly.com/                            
Georgetown Ca.
Gateway to the Rubicon.
MCR 09 I'm Number 4 on the list

sake bomb

we had and hella good time too. those pics are sick.

bigbluebeater

it been a while but we finally took apart the transfercase that broke at last years roundup. the Marlin 4.7 gears stripped like we thought. here are some pics.












1991 Toyota 4runner, Exo Cage, 3.4l V6 5vz-fe, R150F, Marlin Chromo Dual Ultimate, Dana 60 Spool, Dana 70u Spool, 6.17 gears, PSC Full Hydro Steering, 40in Trep Stickies, Stazworks Beadlocks, Warn 9.5xp

KYOTA


bigbluebeater

ya but it would be nice to know what caused it
1991 Toyota 4runner, Exo Cage, 3.4l V6 5vz-fe, R150F, Marlin Chromo Dual Ultimate, Dana 60 Spool, Dana 70u Spool, 6.17 gears, PSC Full Hydro Steering, 40in Trep Stickies, Stazworks Beadlocks, Warn 9.5xp