SAS with a small block

Started by CJTownsend, August 27, 2008, 07:35:07 PM

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

CJTownsend

August 27, 2008, 07:35:07 PM
I getting ready to do a SAS to my 92 pickup but I'm going to be putting in a Ford 5.0 afterwards. What springs should I go with for the extra weight?

jimbo74

#1
August 27, 2008, 07:36:32 PM
how high do you want the truck to sit? get 2" taller springs than you want, and you should be fine...... realize that a SAS will also net you an additional 2" over the height the truck was originally.....
:usa:

The cost of freedom is always high, but Americans have always paid it. And one path we shall never choose, and that is the path of surrender, or submission.

~ John F. Kennedy ~

CJTownsend

#2
August 28, 2008, 07:56:10 PM
Currently I have a 3" BL with 4.5-5" IFS suspension lift running 36's with the 22RE. I would like to run 37's with the SAS. So how ever much lift that would take.

topar

#3
August 28, 2008, 08:15:58 PM
I run a 5" MC kit and a 350 SBC.  I run 36" Iroks.  I also run a 3" body lift due to the tranny (you might need to do the same) I need to trim my cab mounts since my shackles hit them.

bigarms23

#4
August 28, 2008, 08:16:19 PM
5inch springs should be fine with the ford motor installed
88 4runner 2016 5.3 auto atlas 2 on tons and tons of fun

kneedownnate

#5
August 29, 2008, 12:48:19 AM
Maybe run the 5" in front and the 4" in back to help it sit more level.
RIP KYOTA

You can go through life being scared of the possible, or you can have a little fun and tease the inevitable.

Give a man venison, he'll eat for a day. Teach a man to hunt Blacktail, he'll be frustrated for life!
Print
Go Up Pages1
User actions