0 Members and 1 Guest are viewing this topic.
Well, if the ideal of excluding the lesser equipped (stock or otherwise) is accepted... there is no fundamental difference between that and a Sierra CLub ideal of exclusion. If we cannot embrace the 4wheel users as a whole. We are not fighting for access. I cannot be that shortsighted
Well yeah, we knew that. But we're saying that with the third member still under the truck and with the driveshaft attached, the drill won't physically fit to drill the holes. The U joint is in the way of the drill body and you can't move the driveshaft out of the way like you did in your pictures. Maybe if you seperate the drive shaft there might be enough room to move the Ujoints around under there, I don't know. I only done it once and I had roger's jig.
K, his d-shaft isnt bolted on because he doesnt have a bolt pattern to bolt it onto... its already off so thats not an issue. Why would he be drilling new holes if his driveshaft was already bolted in? He is trying to drill new holes so he CAN bolt his d-shaft on.... he has all the paices laying there to get it done he just needs to use his noggin a lil'
No, Kyles 2nd picture shows it already under the truck, so my premise still stands. With the dshaft clamped to the pinion flange and the other side unbolted from the tcase, the dshaft can't be moved around enough to allow the drill to fit. Have you tried to drill it with the third under the truck? It's not nearly as easy as it is out of the truck. Anyway, this is beating a dead horse. I'll let Kyle explain.
Quote from: robinhood4x4 on Jul 30, 2004, 02:06:48 PMNo, Kyles 2nd picture shows it already under the truck, so my premise still stands. With the dshaft clamped to the pinion flange and the other side unbolted from the tcase, the dshaft can't be moved around enough to allow the drill to fit. Have you tried to drill it with the third under the truck? It's not nearly as easy as it is out of the truck. Anyway, this is beating a dead horse. I'll let Kyle explain.yes i know ITS NOT THAT HARD!!!!!!!!!!! i did the front flange of my tcase with my Bud Built on there and holding haft a d-shaft up there and fitting the drill up ther just fine! ITS NOT HARD! the third has 50x more room to move around!
Started by gferris5 « 1 2 » Chit Chat Camp
Started by Asher Chit Chat Camp
Started by Spulen81 Jeep Tech
Started by subliminaltrips Trail Reports, Events, and Gatherings
Started by BigMike Trail Reports, Events, and Gatherings