Everyone from Idaho, Let's start a Chapter!

Started by solar86yota, March 17, 2008, 08:48:52 PM

0 Members and 1 Guest are viewing this topic.

solar86yota

We can meet up and go wheelin' or swap parts or something...it will be fun! We can start brandishing excessive amounts of turtle stickers on our trucks..
By the time I get the money for an SAS I'll be 65 at this rate!

79coyotefrg

:inthedark:   i thought we had more than one idaho spud
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

solar86yota

I :turtle3: ImaHoToy87 Is from idaho, and another guy who is in the navy. Other than that.. I'm not sure. That's partly why I posted this. :turtle3:
By the time I get the money for an SAS I'll be 65 at this rate!

LOL @ IFS

Or you could come on down to Utah and wheel with us.  :)

RCKSQRL

Oh there are a bunch of us around.... we are just in different clubs!

solar86toy where are you at?

I am in Boise, know of 3+ toyota guys associated with our club and there are many more out there with marlin gear.... sami's and other hybrids!
'85 EFI Runner
4.3 with 700R4- for sale
5.29 detroit F/R
Front 3 Link with air shocks
rear 4 Link
Custom Fuel cell
8274
Crawler #719, rear with 4.70 # 677,
Twin stick
Skys manufacturing T-case crossmember

6 point cage modified with harness bar, dash bar and PRP seats mounted to cage
2 feet chopped off the back

It seems it is never done........

in works for new body and exo, motor and trans swap...

solar86yota

Cool, I live in POKY, and there aren't any clubs around here. I think they have one for Jeeps in Idaho Falls though, Lol!!!
By the time I get the money for an SAS I'll be 65 at this rate!

RCKSQRL

'85 EFI Runner
4.3 with 700R4- for sale
5.29 detroit F/R
Front 3 Link with air shocks
rear 4 Link
Custom Fuel cell
8274
Crawler #719, rear with 4.70 # 677,
Twin stick
Skys manufacturing T-case crossmember

6 point cage modified with harness bar, dash bar and PRP seats mounted to cage
2 feet chopped off the back

It seems it is never done........

in works for new body and exo, motor and trans swap...

oldschool64bus

well hell I'm here in Boise but I'm truckless so far lol if I can help this kid with the emissions I think I'm going to buy his 83.

79coyotefrg

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

oldschool64bus

 :willynilly: I think I'm gonna bite the bullet and buy a 1983 yota sr5, I offered the kid $2600 since the truck wont pass emissions currently. I might be bugging you 79coyotefrg with some weber  :help:

LOL @ IFS

Why so much?  I bought my '81 SR5 for $900 and it runs great and passes emissions...

RCKSQRL

when ever you all get over to Boise and want to go out let me know!
'85 EFI Runner
4.3 with 700R4- for sale
5.29 detroit F/R
Front 3 Link with air shocks
rear 4 Link
Custom Fuel cell
8274
Crawler #719, rear with 4.70 # 677,
Twin stick
Skys manufacturing T-case crossmember

6 point cage modified with harness bar, dash bar and PRP seats mounted to cage
2 feet chopped off the back

It seems it is never done........

in works for new body and exo, motor and trans swap...

oldschool64bus

what kinda shape was yours in when you got it? The 83 is in pretty good shape and already has a few things done to it.

Quote from: LOL @ IFS on April 08, 2008, 10:02:41 PM
Why so much?  I bought my '81 SR5 for $900 and it runs great and passes emissions...

solar86yota

Yeah 2600, does sem kinda high. What kinda stuff does it already have!!??!?!?
By the time I get the money for an SAS I'll be 65 at this rate!

THK Matt

:woohoo: i'd be down for an Idaho Chapter.

have one setup for the MCR run this year. id sport an idaho chapter sticker on my junk.

lets get this chapter :disturbed:
how do we make this happen? (admins?)

also for you idaho guys...
read my Convoy thread for MCR this fall.
http://board.marlincrawler.com/index.php?topic=44003.0

and :wave: oldschool64bus & RCKSQRL
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

LOL @ IFS

Quote from: oldschool64bus on April 09, 2008, 11:48:55 AM
what kinda shape was yours in when you got it? The 83 is in pretty good shape and already has a few things done to it.


Mine's in great shape mechanically.  No rust on the cab, but the usual rust in the bed.  The bed is still strong, though.  It has a 4" lift via add-a-leafs (ugh), 33" BFGs (ugh), and some ugly American Racing alloy wheels (ugh). 

oldschool64bus

well its got a pretty hefty front and rear bumper, sliders, supposedly a rebuilt 5sp Marlin tranny, I couldn't really tell, rebuilt engine not too long ago, he thinks it might have at least a locker in the rear, theres a switch on the dash and wires that run to the rear diff, some almost new 32" BFGs and thats all I can think of off the top of my head

Quote from: LOL @ IFS on April 10, 2008, 07:38:47 AM
Mine's in great shape mechanically.  No rust on the cab, but the usual rust in the bed.  The bed is still strong, though.  It has a 4" lift via add-a-leafs (ugh), 33" BFGs (ugh), and some ugly American Racing alloy wheels (ugh). 

THK Matt

Quote from: oldschool64bus on April 10, 2008, 04:41:04 PM
well its got a pretty hefty front and rear bumper, sliders, supposedly a rebuilt 5sp Marlin tranny, I couldn't really tell, rebuilt engine not too long ago, he thinks it might have at least a locker in the rear, theres a switch on the dash and wires that run to the rear diff, some almost new 32" BFGs and thats all I can think of off the top of my head


sounds like good start... if  there are wires to the diff.. is there an electric motor on the diff?
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

oldschool64bus

I didnt get to crawl around under it yet, the kids told me there were wires going to the diff, but anyways heres a link to pics of my new 83  :willynilly: 
http://board.marlincrawler.com/index.php?topic=44582.0

Tumbleweed

Add me to the list of Boise Toy wheelers. 

RCKSQRL

'85 EFI Runner
4.3 with 700R4- for sale
5.29 detroit F/R
Front 3 Link with air shocks
rear 4 Link
Custom Fuel cell
8274
Crawler #719, rear with 4.70 # 677,
Twin stick
Skys manufacturing T-case crossmember

6 point cage modified with harness bar, dash bar and PRP seats mounted to cage
2 feet chopped off the back

It seems it is never done........

in works for new body and exo, motor and trans swap...

Yota-Freak

i need to get my pics up Po, and chase needs to get on here

solar86yota

Yeah, man! He sports a big faded Marlin Sticker on his truck, but I don't think he has an account! I can't wait to paint my bumper!
By the time I get the money for an SAS I'll be 65 at this rate!

Yota-Freak

k cuz he needs to swap me door hinges for my tailgate..lol

THK Matt

Quote from: solar86yota on July 29, 2008, 07:49:40 PM
Yeah, man! He sports a big faded Marlin Sticker on his truck, but I don't think he has an account! I can't wait to paint my bumper!

WOW! you changed your avatar! thats awesome.... i like your rear bumper.
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

Yota-Freak

yeah finally got 12 posts! hey dude thanks man=) i like it too...is there a way where i can post more pics?

THK Matt

Quote from: Yota-Freak on July 29, 2008, 09:05:35 PM
yeah finally got 12 posts! hey dude thanks man=) i like it too...is there a way where i can post more pics?

start a rig gallery... and post up by hosting them through photobucket.
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

Yota-Freak

forget that, lol...ill do it when i get bored enough, but thanks dude

solar86yota

Hey thanks, HO!!! I still need to PAINT it though  :biggthumpup: I see you met my buddy, Yota-FREAK!
By the time I get the money for an SAS I'll be 65 at this rate!

Yota-Freak

haha we all need to go diggin, and Nate can come again...god that was a blast